Military Engineer Services-MES has published Replacement Of Corrugated Asbestos Sheets To Galvanium Sheet Of Otm Bldg No T15 And T37 At Mil Stn Banbasa. Submission Date for this Tender is 24-02-2021. Sheet Tenders in Banbasa Uttarakhand. Bidders can get complete Tender details and download the document.
| Name of Work: REPLACEMENT OF CORRUGATED ASBESTOS SHEETS TO GALVANIUM SHEET OF OTM BLDG NO T15 AND T37 AT MIL STN BANBASA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0.05 | DESCRIPTION OF ITEMS | |||
| 2 | 1 | Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering including ridges, hips, valley etc. complete all as specified and directed. | 1000 | Sqm | |
| 3 | 2 | Dismantling timber scantling 40 Sq cm and over framed work in any position complete all as specified and directed. | 5 | Cum | |
| 4 | 3 | Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, copings etc. built in cement mortar or cement lime mortar complete all as specified and directed. | 1 | Cum | |
| 5 | 4 | M & L for Brick work built in CM 1:6 with sub class old size bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.\n\n | 1 | Cum | |
| 6 | 5 | S & F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming to Gde Fe-410W(Gde-E-250) quality B inluding cutting, drilling, reiveting/welding or connecting with bolts as required complete all as specified and as directed. | 3950 | Kg | |
| 7 | 6 | S & F of mild steel hold fast, fan hooks, wind tie , cleat, bolt, guard bar etc of flat iron confirming to Fe-290 Gde-E-165 complete all as specified and directed. | 140 | Kg | |
| 8 | 7 | S & F pre-painted Trapezoidal profile galvalume aluminium zinc coating steel sheet 0.50mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa minimum yield strength conforming to IS - 513 (1994) coated with hot dip alloy of 55% aluminium + 43.50%Zinc +1.50% silicon and finished with resin coat ( of thickness not less than 35 micron) on both surface @150gm/sqm of coating (total both surfaces) of approved colour as in roof covering/cladding, fixed with self tapping screws (make hilty/fissers), neoprene and epdm washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. \nNote : The colour of sheet shall be approved by GE. | 1000 | Sqm | |
| 9 | 8 | Ditto all as per Item No. 7 above but for plain sheet as in roof ridges/clading to wall etc. complete all as specified and directed. | 70 | Sqm | |
| 10 | 9 | M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. | 40 | Sqm | |
| 11 | 10 | M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick wall surfaces finished the surface even and smooth with out using exstra cement including three coats of white wash after preparing the new plastered surfaces complete all as specified and directed.\n\n | 20 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
