Maintenance Repair To Damaged Single Vented H . P Sluices 1 . Bamuner Bazar Sluice At Mouza-Choto Rakshaskhali 2 . Gazir Khal Sluice At Mouza- Dakshin Shibganj And 3 . Gorachand Khal Sluice At Mouza- Madhabnagar Under Patharpratima Irrigation Sub-Di
Tender Value
9.97 Lakhs
Estimated cost
Bid Submission
19 Feb 2021
0 days left
EMD
19948
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PATHARPRATIMA → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Repair To Damaged Single Vented H . P Sluices 1 . Bamuner Bazar Sluice At Mouza-Choto Rakshaskhali 2 . Gazir Khal Sluice At Mouza- Dakshin Shibganj And 3 . Gorachand Khal Sluice At Mouza- Madhabnagar Under Patharpratima Irrigation Sub-Division Of Kakdwip
BOQ
| Name of Work: M/R to damaged single vented H.P sluices 1) Bamuner Bazar sluice at Mouza-Choto Rakshaskhali 2) Gazir Khal Sluice at Mouza- Dakshin Shibganj and 3) Gorachand khal sluice at Mouza- Madhabnagar under Patharpratima Irrigation Sub-Division of Kakdwip Irrigation Division.. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. \n(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. | item no 1 | 531 | % Cum. |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. | item no 2 | 531 | % Cum. |
| 3 | 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (b) above 150 mm. thick | item no 3 | 30.63 | Cum. |
| 4 | 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.\na) Pakur Variety | item no 4 | 30.63 | Cum. |
| 5 | 5 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | item no 5 | 328.28 | Sqm. |
| 6 | 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]\n(ii) With 1:4 cement mortar\n(a) 20 mm thick plaster | item no 6 | 328.28 | Sqm. |
| 7 | 7 | Neat cement punning about 1.5 mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. | item no 7 | 328.275 | Sqm. |
| 8 | 8 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. | item no 8 | 1503 | Cum. |
| 9 | 9 | Extra rate over Item No 16 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. | item no 9 | 751.5 | Cum. |
| 10 | 10 | Extra rate over Item No16 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre. | item no 10 | 1503 | Cum. |
| 11 | 11 | Taking out flap shutter of sluice gate including hoising arrangements and refitting the same with new nuts and bolts where necessary. (a) Upto 4 Sqm ii) Taking out only. | item no 11 | 4.29 | Sqm. |
| 12 | 12 | Supplying, fitting, fixing Mild Steel flap shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineerin-charge) including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. | item no 12 | 387.28 | Kg. |
| 13 | 13 | Taking out sluice gate draw shutter & gearing arrangements pedestal and refitting the same with new nuts and bolts where necessary.\n(a) Upto 4 Sqm.\nii) Taking out only.\n | item no 13 | 2.59 | Sqm. |
| 14 | 14 | Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer-in-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anti corrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. | item no 14 | 264.31 | Kg. |
| 15 | 15 | Supplying, fitting & fixing in position rubber seal arrangements with musical note harmonic 'J' type for making water tight in both up and down stream of draw shutter as well as flap shutter including guide paths, additional M. S. flats, bolts and nuts for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-incharge.\n(a) Flat Type Rubber Seal (i) 59 mm. x 6 mm. | item no 15 | 21.837 | Metre |
| 16 | 16 | Supplying /Replacing at site new pedestral or other similar items for sluices made with mild steel plates, angles, channels holding down nuts & bolts etc. including fitting, fixing in position in concrete or masonary complete as per direction of the Engineer-in-charge. | item no 16 | 72.24 | Kg. |
| 17 | 17 | Earthwork in closing ghoges in embankments including cutting, filling puddling with water and ramming including all leads and lifts if necessary. | item no 17 | 325 | Cum. |
| 18 | 18 | Supplying / Replacing Gun Metal Bush for screw gearing arrangement required for hanging arrangement to draw shutter and fitting & fixing with the screw gearing arrangement for operating the draw shutter by taking out the old screw gearing arrangement and Gun Metal bush etc. complete as per direction of the Engineer-in-charge.(The old materials to be returned to Departmental Godown.)\n(a) 50 mm. dia. | item no 18 | 4 | Each |
| 19 | 19 | Supplying / Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in position with screw gearing arrangement for operating the draw shutter including taking out old gear rod by cutting bolts etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.) (a) 50 mm. dia. | item no 19 | 9 | Metre |
| 20 | 20 | Supplying, fitting & fixing Cast Iron wheel (after taking out existing one if necessary), rim made of 28 mm. to 36 mm. dia to fit any size of gear rod including carriage to site, painting with two coats of bituminous paint over two coats of red lead primer etc. complete as per direction of the Engineer-in-charge. (a) 45 cm. dia. Cast Iron wheel. | item no 20 | 4 | Per set |
| 21 | 21 | Oiling, cleaning & greasing the regulator gate & gate parts including guide channel, top runner, pedestal block, gear rods, wheel, fish plate etc. with sufficient lubricant as and when necessary as directed by the Engineer-in-charge including cost of all materials to site complete. | item no 21 | 3 | set |
AI Tender Summary
Tender Timeline
Feb 05, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender