| 1 | 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 Metre and lead upto 30 metre and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or in to the plinth and removal & disposal of surplus earth as directes by the Engineer- in- charge up to a distance of 30m from the foundation trenches. | 4.01 | 1 | Cum |
|---|
| 2 | 2 | Clearing Jungle including uprooting of rank vegetations, grass, bush wood, trees and saplings of girth upto 20 cm measured at a height of one meter above ground level and removal of rubbish upto a distance of 50 meters outside the periphery of area cleared. | 4.09 | 1500 | Sqm |
|---|
| 3 | 3 | Concrete with 4cm gauge down graded Stone ballast , coarse sand (F.M. 2.9 to 3.2) and cement in proportion of 12:6:1 in foundation and under floors and supply of all materials, labour, tools and plants etc. required for proper completion of the work. | 5.01 | 0.5 | Cum |
|---|
| 4 | 4 | Cement concrete with 2cm gauge Stone ballast, coarse sand ( F.M. 2.9 to 3.2) and cement in the proportion 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. \n | 5.03 | 0.5 | Cum |
|---|
| 5 | 5 | Supply and fixing of single leaf flush doors commercial quality conforming to I.S. 2202 part-I (1983) including fixing of wooden cleats and stoppers including cost of all materials labour, & T&P etc. required for the proper completion of the work. (b) 32 mm thick | 8.24 | 0.5 | Sqm |
|---|
| 6 | 6 | Brick work with old or dismantled bricks in 1:6 cement and coarse sand (2.9 to 3.2 F.M) mortar in (230mm) thick wall in foundation and other place including cost of all materials, labour,cleaning of old bricks and T&P etc. required for proper completion of work | 22.04 | 0.5 | Cum |
|---|
| 7 | 7 | Supply and fixing 4 mm thick glass panes of Saint Gobain/Modi with putty & brads of approved make and quality as per sample including supply of all materials, labour and T&P etc. required for proper completion of the work . | 22.06 | 1 | Sqm |
|---|
| 8 | 8 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (A) L drops 16mm dia x 300/200 mm long | 22.11 (a) | 2 | Each |
|---|
| 9 | 9 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (B) Tower bolts 200 mm long | 22.11 (b) | 2 | Each |
|---|
| 10 | 10 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (C) Tower bolts 150mm long | 22.11 (c) | 2 | Each |
|---|
| 11 | 11 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (D) G.I. hinges 100mm to 150 mm long | 22.11 (d) | 2 | Each |
|---|
| 12 | 12 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (E) Iron door spring | 22.11 (e) | 2 | Each |
|---|
| 13 | 13 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (F) M.S. Handle 100mm size to 150mm size | 22.11 (f) | 2 | Each |
|---|
| 14 | 14 | Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete. (G) M.S. Chain kunda | 22.11 (g) | 2 | Each |
|---|
| 15 | 15 | Mild steel or iron work in heavy large size sections such as trusses, built-up gates, roof work, window/boundry grill or railing, trench covers, grating, T/F rail etc. wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. | 9.02 | 0.01 | M.T. |
|---|
| 16 | 16 | T.M.T. or Tor Steel in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks, and authorized overlapping as required for proper completion of the work. | 9.04 | 0.01 | M.T. |
|---|
| 17 | 17 | For every coat after first coat of white washed surface including cost of all material, labour and T&P etc. required for proper completion of work. | 14.02 | 50 | Sqm |
|---|
| 18 | 18 | Supply and fixing of welded mesh of approved quality and size as approved by E/I, over M.S.Angle frame with M.S. flat, nuts & bolts or welding as required , Rate including cost of all material, labour and T&P etc. required for proper completion of work. (Excluding cost of M.S.Angle frame with M.S. flat) | 9.16 | 2 | Kg. |
|---|
| 19 | 19 | 12mm thick plaster with cement mortar of 1 part cement & 4 parts of approved coarse sand (2.9 to 3.2 F.M) over Brick work, min. thickness not less than 10mm including supply all material, labour and T&P required for proper completion of work. | 11.05 | 5 | Sqm. |
|---|
| 20 | 20 | Repair of plaster in patches upto one sqm. area including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. Depth, watering the area and then replastering of mix 1:4 cement and coarse sand mortar (2.9 to 3.2 F.M) and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for proper completion of the work. | 22.01 | 3 | Sqm |
|---|
| 21 | 21 | Providing and mixing approved quality of water proofing compound (125 gms.) (DR. FIXIT / RECRON.3S) / hardening material in cement mortar or Concrete as per direction of E/I in proportion as recommended by the manufacturer. | 11.12 | 1 | Per bag of cement |
|---|
| 22 | 22 | Repair to 2.5 cm . thick cement concrete floor in patches upto one sqm. area consisting of one part cement, 2 parts approved coarse sand (2.9 to 3.2 F.M) and 4 parts of 12 mm down graded approved stone grit adding concrete hardner of approved make in specified proportion or as directed by E/I and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for proper completion of the work. | 22.02 | 2 | Sqm |
|---|
| 23 | 23 | Dismentalling and resoling brick on edge / intrlocking tile floor with existing old bricks/tile laid dry joints filled with sand including preparation of base to proper slope and camber, its ramming including supply of labour, T&P etc. (Labour only) | 22.03 | 2 | Sqm |
|---|
| 24 | 24 | Providing and fixing part of 35 mm thick Maleshian saal/Marandi wood door and windows shutter by replacement of top rail or panels or vertical members whatsoever required as per existing designs, inclduing detatching the shutter/deterioted parts, opening out and separating the frame members and panels and oxidized iron fittings if required including reassembling the shutters in parts and again re-fixing the shutter. Rates are including the cost of all material, labour and T&P etc. required for proper completion of the work. (Only those parts replaced will be measured) | 22.08 | 0.1 | Sqm |
|---|
| 25 | 25 | Painting or varnishing on iron works in small areas of every coat on previously painted old wood or steel work of approved superior quality ICI Dulux or Equivalent ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. | 13.03 | 15 | Sqm |
|---|
| 26 | 26 | Painting or varnishing on iron works in small areas of every coat after Ist coat of approved superior quality ICI Dulux or Equivalent ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. | 13.02 | 15 | Sqm |
|---|
| 27 | 27 | Applying BIRLA PUTTY or equivalent putty on new interior surface over one coat of water base cement primer of ICI or equivalent brand for smoothning and leveling of the surface as per requirement and direction of E/I, including cost of all material,labour and T&P required for proper completion of work. | 13.04 | 25 | Sqm |
|---|
| 28 | 28 | Removing paint or varnish with paint remover or caustic soda including supply of all materials, labour and T&P etc. required for proper completion of work. | 22.15 | 5 | Sqm |
|---|
| 29 | 29 | For every coat after first coat of color washed surface including cost of all material, labour and T&P etc. required for proper completion of work. | 14.05 | 100 | Sqm |
|---|
| 30 | 30 | Two coat synthetic/acrelic distemper on Old work including supply of all materials, labour and T&P etc. required for proper completion of the work. | 13.10+13.11 | 40 | Sqm |
|---|
| 31 | 31 | Dismantling plastered or unplastered brick work or stone masonry work in lime or cement mortar and inclduing stacking of materials as directed by Engineer-in-charge within a distance of 60 meters. | 15.01 | 0.5 | Cum |
|---|
| 32 | 32 | Dismantling reinforced cement concrete or reinforced brick work or Cement Concrete of main gantry, auxillary foundation and any other foundation in switch yard. including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 metres. | 15.02 | 0.5 | Cum |
|---|
| 33 | 33 | Dismantling cement concrete or brick or granolithic floor, inclduing base concrete as and where required including stacking of dismantled material as directed by Engineer-in-charge within a distance of 60 meters. | 15.03 | 2 | Sqm |
|---|
| 34 | 34 | P/F 32 mm dia P.V.C. waste pipe | 25.28 | 10 | Each |
|---|
| 35 | 35 | Scraping and cleaning old white wash, colour wash, cement wash or snowcem etc. with wire brush, sand paper etc. including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metres including cost of all labour, T&P etc. required for proper completion of work. | 22.16 | 50 | Sqm |
|---|
| 36 | 36 | Thorough cleaning of septic tank with sludge pump including disposal of waste outside the corporation area including removing septic tank cover and refixing cover in its position as per direction of the E/I including cost of all labour, T&P etc. required for proper completion of work. | 22.19 | 4 | Each |
|---|
| 37 | 37 | Thorough cleaning of inspection chamber including disposal of waste outside the corporation area including removing septic tank cover and refixing cover in its position as per direction of the E/I including cost of all labour, T&P etc. required for proper completion of work. | 22.2 | 5 | Each |
|---|
| 38 | 38 | Thorough cleaning of main drain of depth upto 300 mm including disposal of waste, refuse, sludge, outside the Corporation area including its washing and cleaning by clean water completely. | 22.21 | 400 | RM |
|---|
| 39 | 39 | Disposal of rubbish/debris outside the corporation area as per direction of Engineer in-charge including cartage labour and T&P etc. required for proper completion of the work. | 22.22 | 50 | Per Cart |
|---|
| 40 | 40 | Providing & Replacing of 110 mm dia PVC pipe (6 Kg/Sq.cm.) with PVC clamp of approved make, SUPREME / ASTRAL or equivalent make as per sample approved by E/I for rain water including cost of all materials, labour and T&P etc. required for proper completion of work. | 22.24 | 5 | RM |
|---|
| 41 | 41 | Providing and replacing of 15 mm dia G.I. Tee/socket/elbow/ bend heavy quality approved make and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. | 22.25 | 10 | Each |
|---|
| 42 | 42 | Providing & Replacing of 15 mm dia G.I. union of approved make and as per sample approved by E/I for repair of pipe lines including cost of all materials, labour and T&P etc. required for proper completion of work. | 22.3 | 2 | Each |
|---|
| 43 | 43 | Providing and replacing of G.I. Reducing socket (20x15) mm size approved make and as per sample approved by E/I and including cost of all materials, labour and T&P etc. required for proper completion of work. | 22.26 | 2 | Each |
|---|
| 44 | 44 | Providing & Replacing of 25mm dia G.I. union of approved make and as per sample approved by E/I for repair of pipe lines including cost of all materials, labour and T&P etc. required for proper completion of work. | 22.32 | 2 | Each |
|---|
| 45 | 45 | Supply and fixing of 15 mm dia C.P.Brass Angle Valve of heavy quality Hindware. make including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.26 | 2 | Each |
|---|
| 46 | 46 | Supply and fixing Euro or equivalent make water storage tank four layer of desired capacity including supply of all materials, labour and T and P etc. required for proper completion of work | 24.45 | 200 | Per litre |
|---|
| 47 | 47 | Providing and fixing bevelled edge looking mirror 5 mm thick glass Indian polished (Atul or equivalent make) size 600mm x 450mm as per approved sample with 6mm thick hard board sheet back fixed with PVC cleats & brass screws and washers including supply of all materials, labour, T&P etc. required for proper completion of work. | 25.18 | 1 | Each |
|---|
| 48 | 48 | Cleaning and opening, over-hauling, oiling and greasing of defective rolling shutter and also resetting of its springs for its smooth functioning including cost of all materials, labour & T&P etc. required for proper completion of work. | 22.12 | 1 | Job |
|---|
| 49 | 49 | Cleaning of existing water supply pipe line of different dia ranging from 50 mm to 100 mm dia including digging trench and opening of pipes thorough cleaning of pipes, cutting, threading if required fixing and refilling of digged trenches including making good the road as directed by the Engineer-in-charge including supply of all labour and T&P etc. required for proper completion of the work. | 22.36 | 5 | RM |
|---|
| 50 | 50 | Cleaning of existing water supply pipe line of different dia ranging upto 50 mm dia including digging trench and opening of pipes thorough cleaning of pipes, cutting, threading if required fixing and refilling of digged trenches including making good the road as directed by the Engineer-in-charge including supply of all labour and T&P etc. required for proper completion of the work. | 22.37 | 5 | RM |
|---|
| 51 | 51 | Providing and fixing 12 mm thick shuttering ply by replacing of panels including detatching the shutters, opening out and seperating the frame members and panels and including reassembling the shutter in part and again refixing the shutter including cost of all material, labour and T&P etc. required for proper completion of work. | 22.09 | 1 | Sqm |
|---|
| 52 | 52 | Providing and fixing P.V.C. connection pipe 300 mm long x 15 mm dia. with brass union including supply of all materials, labour and T and P etc. required for proper completion of work | 24.41 | 10 | Each |
|---|
| 53 | 53 | Providing & Replacing of 32 mm dia C.P. brass /SS waste of approved make and as per sample approved by E/I for wash hand basin/sink of standard pattern with check nut including cost of all materials, labour and T&P etc. required for proper completion of work. | 22.34 | 5 | Each |
|---|
| 54 | 54 | Providing and fixing 15mm dia C.P. Pillar cock (400 gms) of Hindware make including supply of all materials, labour, TandP etc. required for proper completion of work. | 24.34 | 4 | Each |
|---|
| 55 | 55 | Providing and fixing 15mm dia B-class (Tata,Jindal) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (Internal work). | 24.01 | 4 | RM |
|---|
| 56 | 56 | Providing and fixing 25mm dia B-class (TATA /JINDAL HISAR make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (Internal work). | 24.03 | 3 | RM |
|---|
| 57 | 57 | Supply and fixing Brass stop cock heavy quality (400gms) 15mm dia ISI marked (Hindware make ) including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.3 | 5 | Each |
|---|
| 58 | 58 | Supply and fixing Brass bib cock heavy quality 15mm dia (200gms) ISI marked (Hindware make) including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.23 | 14 | Each |
|---|
| 59 | 59 | Supply and fixing of 15 mm dia C.I. / PVC bib-cock including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.25 | 5 | Each |
|---|
| 60 | 60 | Supply and fixing C.P. Brass stop cock heavy quality (400gms) 15mm dia (Hindware make CAT NO-F440020) including supply of all materials labour .TandP etc. required for the proper complittion of the work | 24.29 | 2 | Each |
|---|
| 61 | 61 | Replacing and fixing White glazed earthen ware W.C. ‘ Orissa `Pan (Hindware Cat. No.20042) 580 mm size of approved sample including cost of all materials, labour and T&P etc completion including dismentling of broken Pan and its disposal out side corporation area. | 22.39 | 1 | Each |
|---|
| 62 | 62 | Providing and fixing of Ist quality white glazed earthen ware wash hand basin ISI marked size 550mm x 400mm (Hindware CAT No. 10100 or equivalent make) with R.S. or C.I. brackets, C.P. Brass pillar cock 15mm dia (weight not less than 400 gms) ISI marked, 32mm dia C.P. brass chain with rubber plug, 32mm dia C.P. Brass waste standard pattern with check nut, P.V.C. connection 15 mm dia including cutting and making good the walls and floor including cost of all required materials, labour and T& P etc. required for proper completion of work ( Fittings to be used should be of superior quality as per approved sample ). | 25.07 | 1 | Each |
|---|
| 63 | 63 | Providing and fixing low level PVC cistern Hindware or equivalent make 10 litre capacity complete with all accessories including cost of all materials, labour and T&P etc. required for proper completion of work. | 25.2 | 1 | Each |
|---|
| 64 | 64 | Providing Carpenter Services for 8 hours service in a day or part as per requirement by experienced carpenter with necessary T&P for attending minor type of repairing work as directed by the Engineer-in-charge | 2.04+ 10% | 5 | Par Day |
|---|
| 65 | 65 | Providing belder Services for 8 hours service in a day or part as per requirement in to carry out the works as directed by the Engineer-in-charge. | Labour Rate CSI No. 2.08+ 10% | 20 | Each |
|---|
| 66 | 66 | Providing Plumber Services for 8 hours service in a day or part as per requirement by experienced plumber with necessary T&P for attending minor type of repairing work as directed by the Engineer-in-charge | Labour Rate CSI No. 2.07+ 10% | 20 | Par Day |
|---|
| 67 | 67 | Providing and fixing full way Brass G.M. gate valve 25mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.35 | 1 | Each |
|---|
| 68 | 68 | Providing and fixing full way Brass G.M. gate valve 32mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.36 | 1 | Each |
|---|
| 69 | 69 | Providing and fixing full way Brass G.M. gate valve 40mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.37 | 1 | Each |
|---|
| 70 | 70 | Providing and fixing full way Brass G.M. gate valve 50mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.38 | 1 | Each |
|---|
| 71 | 71 | Supply and fixing of 15 mm dia P.V.C. float valve with brass union and rod complete ISI marked including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.43 | 1 | Each |
|---|
| 72 | 72 | Replacing and fixing new galvanized mosquito proof heavy quality iron wire mesh (16x24) gauge over door/window with old beading and including supply and fixing necessary screws/nails and all material, labour and T&P etc. required for proper completion of work. | 22.1 | 2 | Sqm |
|---|
| 73 | 73 | 1st class brick (not less than class 150) work in 1:6 cement and coarse sand (2.9 to 3.2 F.M). mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. | 6.01 | 0.05 | Cum |
|---|
| 74 | 74 | Thorough cleaning of PVC TANK capacity of 5000 to10000 litres with bleaching powder and rubbing inside surface of PVC TANK with jute and wire brush including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of E/I including cost of all materials, labour and T&P etc. required for completion of wrok. | 22.38A | 2 | Job |
|---|
| 75 | 75 | Providing and fixing 610mm x 450mm x 200mm 100% stainless steel Sink of Jayna Make as per approved sample with R.S. or C.I. brackets, 32mm C.P. brass waste complete with checknut, 32mm dia PVC waste pipe with bend including supply of all required materials, labour and T&P etc. required for proper completion of work. | 25.11 | 1 | Each |
|---|
| 76 | 76 | Repair of sluice valve of 100mm/80 mm size including replacing of spandle as per approved sample and including opening and refixing of the valve and including cost of all materials, labour and T&P etc. required for proper completion of the work. | 22.43 | 1 | Job |
|---|
| 77 | 77 | Disconnection and extraction of defective VT or sub-merssible pump & motor with column pipe and getting tested the same for its defects, including checking mains cut outs, fuses etc. including re-lowering and re-connection of the same after repair / removing the defects for its smooth and normal working including cost of all material, labour and T&P etc. required for proper completion of work. | 22.70A | 1 | Job |
|---|
| 78 | 78 | 40mm thick 1:2:4 cement concrete floor with cement, approved coarse sand (2.9 to 3.2 F.M) and 20mm graded stone aggregate laid in panels finished with 3mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work but excluding cost of base concrete. | 12.02 | 1.5 | Sqm |
|---|
| 79 | 79 | S/F 6 or 8 mm thick glazed/matt finish tiles SOMANI or equivalent approved quality and size upto 400x400 in floor, skirting or dado laid with 1:3 cement and coarse sand mortar and joints finished with white cement including polishing etc. complete including supply of all materials, labour and T&P etc. required for proper completion of work. | 12.07 | 0.5 | Sqm |
|---|
| 80 | 80 | S/F 10mm thick glazed/matt finish Standared quality Vitrified tiles of size 600x600 or more of approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by E/I in floor, skirting or dado laid with 1:3 cement and coarse sand mortar, finished with white cement and pigment to match the tiles shade etc.complete including supply of all materials, labour and T&P etc. required for proper completion of work. | 12.11 | 0.5 | Sqm |
|---|
| 81 | 81 | Providing and fixing glass strip of 3.15 mm (1/8”) thick and 2.5cm. deep in joints of floor at the time of laying floors flush with floor level including supply of all materials, labour and T&P etc. required for proper completion of the work. | 12.08 | 5 | RM |
|---|
| 82 | 82 | Applying two coat of Dr.Fixit pidicrete URP with cement slurry of one parts of Dr. Fixit pidicrete URP (covering area of URP-2.00 to 2.2Sqm/Kg) and 1.5 parts of cement on Horizontal and vertical damp surface. Before application ,clean the surface with wire brush or scrubber to remove hidden dirt,loose particles,laitance and dust, degrease the surface by using suitable solvent. throughly saturated the surface with potable water but at the time of application water should not be accumulated at any place as per direction E/I including supply of all materials ,labours and T& P etc.required for proper completion of work. | 26.35 | 39 | Sqm |
|---|
| 83 | 83 | Providing and fixing JET With Pipe heavy quality including supply of all materials, labour and TandP etc. required for proper completion of the work. | 24.54 | 1 | Each |
|---|
| 84 | 84 | S/Fixing G.I. Nipple of 15mm dia of various Lengths ISI mark including supply of all material, labour and TandP etc. required for proper completion of work. (A) UPTO 100MM Length | 24.19A | 5 | Each |
|---|
| 85 | 85 | S/Fixing G.I. Nipple of 15mm dia of various Lengths ISI mark including supply of all material, labour and TandP etc. required for proper completion of work. (B) from 125mm to 230mm Length | 24.19B | 5 | Each |
|---|
| 86 | 86 | Add extra for using C.P. Brass Heavy Quality 15 mm dia Extantions in item No.20.20 , 20.21and 20.26 as required complete. (A)12mm Long | 24.27 A | 5 | Each |
|---|
| 87 | 87 | (B)20mm Long | 24.27 B | 5 | Each |
|---|
| 88 | 88 | Providing and fixing 80 mm dia B-class (Tata,Jindal) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour TandP etc complete (Internal work). | 24.08 | 0.5 | RM |
|---|
