Providing And Erection Of Single-Phase Submersible Motorpumps And Rotational Moulded Polythene Water Tanks Including Construction Of Water Huts, Providing And Laying Of Gi Pipelines, Construction Of Soakage Pits And All Related Works Complete Including 15
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Feb 2021
0 days left
EMD
99799
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tarana → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing and erection of Single-Phase Submersible Motorpumps and Rotational Moulded Polythene Water Tanks including Construction of Water Huts, Providing and Laying of GI Pipelines, Construction of Soakage Pits and all related works complete including 15 days successful trial run for Water Supply Arrangement in 35 Schools and 12 Aanganwadis in 47 Villages of Block Tarana of District Ujjain
BOQ
| Name of Work: - Providing and errection of Single-Phase Submersible Motorpumps and Rotational Moulded Polythene Water Tanks including Construction of Water Huts, Providing and Laying of GI Pipelines, Costruction of Soakage Pits and all related works complete including 15 days successful trial run for Water Supply Arrangement in 35 Schools and 12 Aanganwadis in 47 Villages of Block Tarana of District Ujjain | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\"/6\" tube well with Contral Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope and connection cable. 3 H.P. with 20 to\n22 stages, Head Mt. 167- 51Discharge LPM 25-90,USOR item no. 24.20.105,xviii/ 266. | 47 | Each | |
| 2 | 2 | Providing and Supplying of HDPE Pipes in 300/500/600 Mtr. Coils or in lengths, Grade PE 100, Conforming to IS 4984-2016 at store or at site. 40 mm dia. 6kg/sq.cm, USOR item no. 9.15/ add. 1 | 7520 | R.Mtr | |
| 3 | 3 | Provision for providing special water chamber with dual arrangement for fixing riser pipe ofhand pump and HDPE pipe of submersible motor pump, cable ,nylone rope etc. complete. | 47 | R.Mtr | |
| 4 | 4 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.2.5 Sq.mm.multi strand, USOR item no. 24.20.107(i)/ 266 | 7520 | R.Mtr | |
| 5 | 5 | Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor. USOR item no. 24.20.108/pg. No. 267. | 7520 | R.Mtr | |
| 6 | 6 | Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS :5312 (Part I) Of 50 MM Class PN-\n1.USOR. Item.no.8.4a/ P. no. 113. | 47 | Each | |
| 7 | 7 | Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core ,4 pair cable for small rural water supply scheme, having source within 500mtr as per approved specification and as directed by Engineer in charge.(In case of lesser length of cable,equivalent amount @ Rs 12 /-per meter of short length will be deducted from above rate). USOR item no. /17.11 /226. | 47 | Job | |
| 8 | 8 | Labour charges for taking out assembly from the tube well of India Mark II hand pump with 45 meters long 32mm dia riser pipe assembly and all other Accessories.USOR item no. 24.5,24.6/ 255. | 47 | Each | |
| 9 | 9 | Labour charges for lowering the assembly with complete fittings of India Mark II Hand pump from the tube well with 32mm dia 45 Meters long riser pipe assembly and other accessories.USOR item no. 24.7,24.8/pg. No. 255. | 47 | Ech | |
| 10 | 10 | Provision for providing special water chamber with dual arrangement for fixing riser pipe ofhand pump and HDPE pipe of submersible motor pump, cable ,nylone rope etc. complete. Non USOR | 47 | Job | |
| 11 | 11 | Supply & erection of readymade mini pump house (control panel box) GI sheet of 18 gauge of size 90cmx90cm x60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level withhold fasts grouted in foundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification.USOR item no. 17.18/pg. No. 228. | 47 | Nos | |
| 12 | 12 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to\n1.5 m, disposed earth to be leveled and neatly dressed. In All kind of soil, USOR item no.1/16.4/P-207. | 660.5 | Cu.m | |
| 13 | 13 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to\n1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road.USOR item no. 2 /16.6 a /208 | 132 | Cu.m. | |
| 14 | 14 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class medium including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part II, 25 mm Dia. G.I. Class medium, USOR item no.3 /6.1/ 86 | 3525 | R.M. | |
| 15 | 15 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class medium including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part II, 20 mm Dia. G.I. Class medium, USOR item no.3 /6.1/ 86 | 2350 | R.M. | |
| 16 | 16 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class medium including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part II, 15 mm Dia. G.I. Class medium, USOR item no.3 /6.1/ 86 | 1175 | R.M. | |
| 17 | 17 | Providing and fixing Tank Nipple with outer threading in G.I. Pipe line i/c cutting threading testing etc. complete confirming to IS 1879, 25 mm Dia. G.I. Class medium, USOR item no.4 /6.49/ 103 | 94 | Each | |
| 18 | 18 | Providing and fixing G. I. Union in G.I. Pipe line i/c cutting threading testing etc. complete (New work) confirming to IS 1879, 25 mm Dia.\nG.I. Class medium, USOR item no.5\n/6.21/ 92 | 141 | No. | |
| 19 | 19 | Providing and fixing G. I. Union in G.I. Pipe line i/c cutting threading testing etc. complete (New work) confirming to IS 1879, 20 mm Dia.\nG.I. Class medium, USOR item no.5\n/6.21/ 92 | 94 | No. | |
| 20 | 20 | Providing and fixing G. I. Union in G.I. Pipe line i/c cutting threading testing etc. complete (New work) confirming to IS 1879, 15 mm Dia.\nG.I. Class medium, USOR item no.5\n/6.21/ 92 | 94 | No. | |
| 21 | 21 | Providing & Fixing Following Check (Non Return) Valves Class II Conforming to IS-778/1984 ( reaffirmed 2005 ) Female ends, tested to 21.09 kg/sq.cm.25 mm dia. (Flanged), USOR item no.6/6.8 /89 | 94 | each | |
| 22 | 22 | Providing And Fixing gate (full way) valves tested to 300lbs /sq.inch or 21.0 kg/sq.cm. Conforming to IS 778/1984 (Reaffirmed 2005) Class-II,\n25 mm dia. (Flanged), USOR item\nno.7/6.4/ 88 | 141 | each | |
| 23 | 23 | Providing and fixing G. I. threaded Flange in G.I. Pipe line i/c cutting threading testing etc. complete(New work) confirming to IS 1879, 25 mm Dia. G.I. , USOR item no 8 /6.39/ 99 | 141 | No. | |
| 24 | 24 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. 25 mm dia.(medium class) Pipes and sockets \nconforming to IS-1239/2011 Part 2 USOR item no 6.1/ 86 | 188 | RM | |
| 25 | 25 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all \ncomplete. 20 mm dia. (medium class) Pipes and sockets conforming to IS-1239/2011 Part 2 USOR item no 6.1/ 86 | 141 | RM | |
| 26 | 26 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. 15 mm dia.(medium class) Pipes and sockets \nconforming to IS-1239/2011 Part 2 USOR item no 6.1/ 86 | 94 | RM | |
| 27 | 27 | Providing and fixing wrought steel Cap Plug with threading in G.I. Pipe line testing etc. complete confirming ti IS:1879 (New & Old Work), USOR item no 9 /6.45/ 101, 102 | 94 | Each | |
| 28 | 28 | Providing and fixing wrought steel Cap Plug with threading in G.I. Pipe line testing etc. complete confirming ti IS:1879 (New & Old Work), USOR item no 9 /6.45/ 101, 102 | 94 | Each | |
| 29 | 29 | Providing and fixing wrought steel Cap Plug with threading in G.I. Pipe line testing etc. complete confirming ti IS:1879 (New & Old Work), USOR item no 9 /6.45/ 101, 102 | 94 | Each | |
| 30 | 30 | Providing & fixing including testing of water taps, 15 mm Dia. CI Self Closing, USOR item no 10 /6.17/ 92 | 235 | Each | |
| 31 | 31 | Filling available excavated earth in trenches, lead up to 50m and lift up to 1.5m in all kind of soil excluding watering and ramming.USOR item no11/ 16.10b /208 | 792.5 | Cu.m | |
| 32 | 32 | Providing, placing and installation of polyethylene water tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and the base support for tank on tenace (at all floor level).USOR item no. 17.36 /pg. No. 3/28 | 23500 | Per Ltr | |
| 33 | 33 | Providing and fixing wash basin with\nC.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x400 mm with single 16 mm C.P. brass pillar tap, PWD SOR item no. 17.11.4 /pg. No. 83 | 94 | Each | |
| 34 | 34 | Providing and laying in position cement concrete of specified grade exclusing the cost of centering and shuttering - All work upto plinth level. With 40 mm Nominal Size graded stone aggregate in Cement concrete 1 :3:6(M-10 Nominal Mix) , USOR Item 16.22 a iii/210 | 16 | Cum | |
| 35 | 35 | Providing & laying mechanically mixed R.C.C. excluding centering & shuttering and reinforcemen t in foundation/plinth (20mm graded metal) In cement\nconcrete 1:1.5:3 (M-20 Nominal Mix),USOR Item 16.24A (i) /211 | 23.5 | Cum | |
| 36 | 36 | Providing & fixing form work i/c centering and shuttering including strutting, propping etc. and removal of form work for:Suspend ed floors, roofs, landings, balconies and access platform.USOR Item16.30(iii) /214 | 154.16 | SQM | |
| 37 | 37 | Brick work with open Bhatta bricks having crushing strength not less than 20 kg/cm² and water absorption not more than 25% in super structure above plinth level and up to floor two level i/c form work & curing etc. complete.In Cement Mortar 1:6, USOR Item\n16.28 e iv /218 | 50.76 | Cum | |
| 38 | 38 | Plaster Work - 15mm thick cement plaster in single coat i/c finished even, smooth and curing complete. In cement mortar 1:6 ( 1 cement, 6 sand ) PWD USOR Item 16.29 b (iv) /214 | 165.44 | Sqm | |
| 39 | 39 | Kota stone slab flooring over 20 mm thick base laid over and jointed with grey cement slurry mix with pigment to match the shade complete. PWD USOR Item 11.34.1 /203 | 64.51 | Sqm | |
| 40 | 40 | Supplying and filling in plinth with crusher stone dust / coarse sandunder floors including, watering, ramming consolidating in layers not exceeding 20cm in depth and dressing complete, PWD USOR Item 2.27/26 | 32.9 | Cum | |
| 41 | 41 | Providing and placing in position cold twisted steel and hot rolled deformed steel reinforcement for R.C.C. work i/c cutting , bending, binding etc. complete i/c cost of binding wire and wastage. USOR Item 16.25 a /211 | 4700 | Kg | |
| 42 | 42 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes PWD USOR Item 10.15.1 /181 | 2585 | Kg | |
| 43 | 43 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and Including cutting to size and shape wherever required.PWD USOR 12.15 / 260 | 169.2 | Sqm | |
| 44 | 44 | Providing and fixing precoated galvanised steel sheet roofmg accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :PWD USOR\n12.16.1 / 260 | 112.8 | RM | |
| 45 | 45 | Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 12 mm thick Cement Mortar 1:3 (1 Cement :\n3 sand) prepared same day when mortar is still green i.e. within 6 hours including pointing the joints with white cement and matching pigments etc., complete.PWD USOR\n11.52 / 54 | 366.6 | Sqm | |
| 46 | 46 | Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor ARMOURED 3 Core 6 Sq mm,SOR\nPWD PIU for Electric work w.e.f. 1.08.2014 Item No. 41.1.6 .1 iii P-No.\n114 | 3995 | RM | |
| 47 | 47 | Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly ,110 mm diameter OD (minimum wall thickness 3.2 mm), PWD USOR Item 19.4.1 / 106 | 940 | RM | |
| 48 | 48 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.PWD USOR Item 19.31 / 109 | 47 | Each | |
| 49 | 49 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40 mm nominal size\n) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :PWD USOR Item\n18.39.1 / 101 | 94 | Each |
AI Tender Summary
Tender Timeline
Feb 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 16, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender