Housing Urban and Rular Development Government Departments Closing in 0 days TDR #26834933

Construction Of Boundary Wall With Gate And Rcc Drain With Culvert For Setting Up Of New Micro Industrial Estate At Jagiroad Dist Morigaon Assam

Issued by Government Departments · Jagiroad, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Feb 2021
0 days left
EMD
6.58 Lakhs
Bank guarantee accepted
Document Fee
9500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jagiroad → Assam
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Boundary Wall With Gate And Rcc Drain With Culvert For Setting Up Of New Micro Industrial Estate At Jagiroad Dist Morigaon Assam

BOQ

Name of Work: Construction of Boundary wall with gate and RCC drain with culvert for Setting up of New Micro Industrial Estate at Jagiroad, Dist- Morigaon, Assam. Gr-II
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11BOUNDARY WALL AND GATE- Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(a) In ordinary soil\nitem1777.76Cum
22Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering, complete.\n(a).Brick on flat soling.\nitem2967.38Sqm
33Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid \nseparately).\n(a) In prop 1cement: 3 sand :6 coarse aggregate by volume\nitem376.76Cum
44Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \nb) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works, retaining wall, boundary wall etc)\nitem4297.32Qtl
55Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:\n3.1.1.1:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\n(b) Using 25mm thick plank\nitem51273.88Sqm
663.1.1.2:Sides of tie beams, grade beams etc. at or below ground level.\nb) Using 25mm thick plank\nitem6673.28Sqm
773.1.1.3:Columns, Pillars, Posts & Strut\nb) Using 25mm thick plank\nitem71340.54Sqm
88Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm downgraded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using Mixer Machine(A) In substructure up to plinth level\n(A) Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\nN) Without using admixture, plasticizer\nb) M20 grade concrete or Prop. 1:1.5:3\nitem8232.52Cum
99(B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticizer\nb) M20 grade concrete or Prop. 1:1.5:3\nitem974.08Cum
1010Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed.\n(I) In Sub-structure up to plinth level including dewatering if necessary\n(a) In proportion 1:3.\nitem10157.8Cum
11111st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4. \n(1 cement:4 sand)\nitem111946.2Sqm
121220 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. \nB) On fair side (backing coat 10 mm and finishing coat 10mm thick)\na) In cement mortar 1:3\nitem127152.08Sqm
1313Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (for Gate only)item13198.36Sqm
1414Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smoothitem147152.08Sqm
1515Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)item157152.08Sqm
1616Supplying fitting and fixing M.S. angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. MS Angleitem1610.12Qtl
1717MS flatitem179.46Qtl
1818Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.item1880.4Sqm
1919Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matteritem1980.4Sqm
2020DRAIN & CULVERT - Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (b)In hard soilitem201849.68Cum
2121Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a).Brick on flat soling.\nitem212905.36Sqm
2222Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(A)In prop 1cement: 3 sand :6 coarse aggregate by volume\nitem22217.91Cum
2323Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (A) In substructure up to plinth level \nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\n(A)M20 grade concrete or Prop. 1:1.5:3\nitem231430.3Cum
2424Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work.item2412379.4Sqm
2525Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\nb) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc\nitem251003.06Qtl
2626Supply and installation of LAPTOP-HP Pavilion x360 Core i7 8th Gen 14-inch Touchscreen 2-in-1 FHD Thin and Light Laptop (16GB/512GB SSD/Windows 10/MS Office/2GB Graphics/Mineral Silver/1.59 kg), 14- dh0045TXitem251No
2727Supply and installation of Epson EcoTank L15160 A3 Wi-Fi Duplex All-in-One Ink Tank Printeritem251No

AI Tender Summary

OUR REF NO 26834933
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 20-02-2021
Authority
Authority Name Assam Industrial Infrastructure Development Copr
Work Description Construction Of Boundary Wall With Gate And Rcc Drain With Culvert For Setting Up Of New Micro Industrial Estate At Jagiroad Dist Morigaon Assam
Basic Detail
Tender No AIIDC/2074/2020/8/1448 dt 30/1/2021
Bidding Type Tender
Location
City Jagiroad
State Assam
Key Dates
Publish Date 04 Feb 2021
Submission Date 20 Feb 2021
Open Date 20 Feb 2021
Finance
Tender Value Ref. Documents
Tender Fee 9500
EMD 6.58 Lakhs
Exemption Not Available
Document List
Tendernotice_1.pdf
BOQ_32510.xls
63AD99A9-DD60-44A8-BB64-F0569BA9EC70.html
DOCUMENT.pdf
FOB.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 04, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 20, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 20, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

xls

BOQ_32510.xls

html

63AD99A9-DD60-44A8-BB64-F0569BA9EC70.html

pdf

DOCUMENT.pdf

pdf

FOB.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender