State Plan - Augmentation Of Pavaratty Regional Water Supply Scheme - Construction Of Sub Station Building At Thrithala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Feb 2021
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrithala → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
State Plan - Augmentation Of Pavaratty Regional Water Supply Scheme - Construction Of Sub Station Building At Thrithala
BOQ
| Name of Work: State Plan - Augmentation of Pavaratty Regional water supply scheme - Construction of Sub Station building at Thrithala | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of substation building at Thrithala - working charges. | |||
| 2 | 1.001 | Engaging special man Mazdoor for clearing tank site and felling trees including cutting of trunks and branches ,removing the roots completely and stacking the serviceable materials | BI01010001010000000000000515BI0100001113 | 10 | No |
| 3 | 1.002 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | BI01010001010000000000000515BI0100001114 | 6.866 | cum |
| 4 | 1.003 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar | BI01010001010000000000000515BI0100001115 | 17.55 | cum |
| 5 | 1.004 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | BI01010001010000000000000515BI0100001116 | 32.295 | cum |
| 6 | 1.005 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres. | BI01010001010000000000000515BI0100001117 | 7 | No |
| 7 | 1.006 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001118 | 507.53 | cum |
| 8 | 1.007 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001119 | 54.966 | cum |
| 9 | 1.008 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level | BI01010001010000000000000515BI0100001120 | 100.457 | cum |
| 10 | 1.009 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level | BI01010001010000000000000515BI0100001121 | 100.215 | cum |
| 11 | 1.01 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001122 | 23100.3 | kilogram |
| 12 | 1.011 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001123 | 3061.58 | kg |
| 13 | 1.012 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001124 | 301.704 | sqm |
| 14 | 1.013 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001125 | 119.71 | sqm |
| 15 | 1.014 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001126 | 190.8 | sqm |
| 16 | 1.015 | Centering and shuttering including strutting, etc. and removal of form for: | BI01010001010000000000000515BI0100001127 | 449.185 | sqm |
| 17 | 1.016 | Centering and shuttering including strutting, etc. and removal of form for: | BI01010001010000000000000515BI0100001128 | 209.629 | sqm |
| 18 | 1.017 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: | BI01010001010000000000000515BI0100001129 | 67.256 | cum |
| 19 | 1.018 | 12 mm cement plaster finished with a floating coat of neat cement of mix: | BI01010001010000000000000515BI0100001130 | 255.696 | sqm |
| 20 | 1.019 | 12 mm cement plaster finished with a floating coat of neat cement of mix: | BI01010001010000000000000515BI0100001131 | 797.458 | sqm |
| 21 | 1.02 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001132 | 23.1 | sqm |
| 22 | 1.021 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001133 | 132.055 | sqm |
| 23 | 1.022 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001134 | 1053.15 | sqm |
| 24 | 1.023 | Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001135 | 255.678 | cum |
| 25 | 1.024 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee- sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001136 | 454.87 | kg |
| 26 | 1.025 | Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws.30 mm thick | BI01010001010000000000000515BI0100001137 | 23.1 | sqm |
| 27 | 1.026 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover | BI01010001010000000000000515BI0100001138 | 8.101 | sqm |
| 28 | 1.027 | Providing and fixing ball bearing for rolling shutters. | BI01010001010000000000000515BI0100001139 | 2 | Nos |
| 29 | 1.028 | Electrification | BI01010001010000000000000515BI0100001140 | 1 | L.S |
AI Tender Summary
Tender Timeline
Feb 03, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender