Modinagar Road Sthiti Brahama Devi School Ke Pass Se Railway Ki Seema Tak Sadak Ke Shuddhikaran Ka Karya
Tender Value
19.88 Lakhs
Estimated cost
Bid Submission
09 Feb 2021
0 days left
EMD
99400
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
STRENGTHENING WORK OF ROAD Modinagar Road Sthiti Brahama Devi School Ke Pass Se Railway Ki Seema Tak Sadak Ke Shuddhikaran Ka Karya
BOQ
| Name of Work: Resurfacing of Road Modinagar Road to Railway Land limit Near Preet Vihar | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing & laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layer with paver in sub-base/base coarse on well prepared surface and compacting with vibratory roller to achieve the desired density, MORT&H - 406. | BI01010001010000000000000515BI0100001113 | 85 | Cum |
| 2 | 2 | Brick edging on both side of the road of M-150 brick 7cm wide & 11 cm deep laid with mud mortar i/c labour & supply of bricks finished to the required template and in proper alignment and also stacking dressing & ramming the excavated earth as directed by E/I | BI01010001010000000000000515BI0100001114 | 897 | Rmt. |
| 3 | 3 | Providing and applying primer coat with 80/100 bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg/sqm. using mechanical means, including supply of all materials, labour, T&P etc required for proper completion of the work as per Clause- 502 of MORT & H specifications and as per direction of the Engineer-in-charge. (A.R.) | BI01010001010000000000000515BI0100001115 | 2826 | Sqm |
| 4 | 4 | Providing and applying tack coat with 80/100 bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg. per sqm. on the prepared bituminous/ granular surface cleaned with mechanical broom, including supply of all materials, labour T&P etc. required for proper completion of the work as per Clause - 503 of MORT & H specifications and as per direction of the Engineer-in-charge. (A.R.) | BI01010001010000000000000515BI0100001116 | 2826 | Sqm |
| 5 | 5 | Providing and laying 50mm thick minimum compacted bituminous macadam on prepared surface with 100-120 tones per hour batch type Hot mix plant producing an average output of 75 MT per hour using crushed aggregated of specified grading-II(19mmNominal Size), premixed with 80/100 bituminous binder @ 3.25% by weight of total mix , transporting the hot mix material to work site, laying with a hydrostatic pavers finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory (8-10 tones) roller for initial brake down rolling, finish rolling by smooth wheeled tandem roller (8-10 tones) to achieve the desired compaction, including supply of all materials, labour T&P etc. required for proper completion of the work as per clause 504 of MORST&H specification sand as per direction of the Engineer in charge (A.R.) | BI01010001010000000000000515BI0100001117 | 142 | Cum. |
| 6 | 6 | Providing and laying bitumenous concrete with 100-120 tonnes per hour batch type Hot mix plant producing an average output of 75 MT per hour using crushed agregated of specified grading-II premixed with 60 / 70 (VG30) bitumenous binder @ 5.00% by weight of total mix and hydrated lime @ 2% by weight of total mix , transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory (8-10 tonnes) roller for initial brake down rolling, finish rolling by smooth wheeled tondom roller (8-10 tonnes) to achieve the desired compaction, including supply of all materials, labour T&P etc. required for proper completion of the work as per clause 509 of MORT & H specification sand as per direction of the Engineer in charge (A.R.) | BI01010001010000000000000515BI0100001118 | 71 | Cum. |
AI Tender Summary
Tender Timeline
Feb 02, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender