Construction Of Boys And Girls Hostel And Class Rooms 4 Nos At Rajiv Gandhi Abhinav Awasiya Vidhyalaya Betalghat District Nainital
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Feb 2021
0 days left
EMD
5.68 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betalghat → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Boys And Girls Hostel And Class Rooms 4 Nos At Rajiv Gandhi Abhinav Awasiya Vidhyalaya Betalghat District Nainital
BOQ
| Name of Work: CONSTRUCTION OF BOYS AND GIRLS HOSTEL & CLASS ROOMS (4 NOS) AT RAJIV GANDHI ABHINAV AWASIYA VIDHYALAYA BETALGHAT (DISTRICT - NAINITAL) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001113 | 648.31 | Cum |
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001114 | 520.26 | Cum |
| 3 | 3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001115 | 612.62 | Sqm |
| 4 | 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | BI01010001010000000000000515BI0100001116 | 109.91 | Cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size | BI01010001010000000000000515BI0100001117 | 105 | Cum |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001118 | 1.21 | Cum |
| 7 | 7 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) | BI01010001010000000000000515BI0100001119 | 94.23 | Sqm |
| 8 | 8 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001120 | 94.23 | Sqm |
| 9 | 9 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001121 | 87.55 | Sqm |
| 10 | 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) All works upto plinth level | BI01010001010000000000000515BI0100001122 | 165.86 | Cum |
| 11 | 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 427.77 | Cum |
| 12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars | BI01010001010000000000000515BI0100001124 | 66542.2 | Kg |
| 13 | 13 | Centring and shuttering including strutting,ropping etc. and removal of form for | BI01010001010000000000000515BI0100001125 | ||
| 14 | 13.01 | Foundations, footings, bases of columns, etc. for mass concrete. | BI01010001010000000000000515BI0100001126 | 207.24 | Sqm |
| 15 | 13.02 | Suspended floors, roofs, landings, balconies and accessplatform | BI01010001010000000000000515BI0100001127 | 442.72 | Sqm |
| 16 | 13.03 | Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI0100001128 | 1279.75 | Sqm |
| 17 | 13.04 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | BI01010001010000000000000515BI0100001129 | 1680.07 | Sqm |
| 18 | 13.05 | Suspended floors, roofs, landings, balconies and access platform.with water proof ply 12 mm thick | BI01010001010000000000000515BI0100001130 | 1014.66 | Sqm |
| 19 | 13.06 | Shelves (Cast in situ) | BI01010001010000000000000515BI0100001131 | 113.2 | Sqm |
| 20 | 13.07 | Edges of slabs and breaks in floors and walls Under 20 cm wide | BI01010001010000000000000515BI0100001132 | 200 | Rm |
| 21 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001133 | 64.27 | Cum |
| 22 | 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001134 | 320.76 | Cum |
| 23 | 16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001135 | 1291.01 | Sqm |
| 24 | 17 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | BI01010001010000000000000515BI0100001136 | 1235.8 | Sqm |
| 25 | 18 | Honey-comb brick work 230/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand). | BI01010001010000000000000515BI0100001137 | 10.16 | Sqm |
| 26 | 19 | 12 mm thick cement plaster in 1:4 ( 1 cement and 4 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001138 | 8.25 | Sqm |
| 27 | 20 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001139 | 199.51 | sqm |
| 28 | 21 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm | BI01010001010000000000000515BI0100001140 | 526 | Nos |
| 29 | 22 | Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete :300 mm weighing not less than 330 gms | BI01010001010000000000000515BI0100001141 | 254 | Nos |
| 30 | 23 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | BI01010001010000000000000515BI0100001142 | 152 | Nos |
| 31 | 24 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete \n250x10 mm | BI01010001010000000000000515BI0100001143 | 695 | Nos |
| 32 | 25 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete \n150X10 mm | BI01010001010000000000000515BI0100001144 | 61 | Nos |
| 33 | 26 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper | BI01010001010000000000000515BI0100001145 | 109 | Nos |
| 34 | 27 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading . | BI01010001010000000000000515BI0100001146 | 288.26 | sqm |
| 35 | 28 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40 mm | BI01010001010000000000000515BI0100001147 | 72 | Nos |
| 36 | 29 | Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete | BI01010001010000000000000515BI0100001148 | 169.82 | Sqm |
| 37 | 30 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type | BI01010001010000000000000515BI0100001149 | 72 | nos |
| 38 | 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). | BI01010001010000000000000515BI0100001150 | 3.76 | Cum |
| 39 | 32 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture | BI01010001010000000000000515BI0100001151 | 32.5 | sqm |
| 40 | 33 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:\nProfile 'B' (Single Pattam) | BI01010001010000000000000515BI0100001152 | 657.4 | Rm |
| 41 | 34 | Supplying and fixing of glass panes in windows and ventilatiors. | BI01010001010000000000000515BI0100001153 | 64.66 | Sqm |
| 42 | 35 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001154 | 4263.6 | kg |
| 43 | 36 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes | BI01010001010000000000000515BI0100001155 | 230.03 | sqm |
| 44 | 37 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | BI01010001010000000000000515BI0100001156 | 200.88 | kg |
| 45 | 38 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating frames]guard bar ladder railing brackets gates and similar works | BI01010001010000000000000515BI0100001157 | 6115.32 | Kg |
| 46 | 39 | Providing and fixing hand rail of approved size by welding etc to steel ladder railing balcony railing and staircase railling including applying a priming coat of approved steel primer M.S. tube | BI01010001010000000000000515BI0100001158 | 63.24 | Kg |
| 47 | 40 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | BI01010001010000000000000515BI0100001159 | 58.46 | Kg |
| 48 | 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm or Planks | BI01010001010000000000000515BI0100001160 | 1008.73 | sqm |
| 49 | 42 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and Conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm\nincluding grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm Planks | BI01010001010000000000000515BI0100001161 | 133.18 | sqm |
| 50 | 43 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | BI01010001010000000000000515BI0100001162 | 375.46 | Sqm |
| 51 | 44 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001163 | 32.3 | Sqm |
| 52 | 45 | 6 mm cement plaster 1:3 (1 cement: 3 fine sand) on ceiling | BI01010001010000000000000515BI0100001164 | 357.21 | Sqm |
| 53 | 46 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete | BI01010001010000000000000515BI0100001165 | 152.56 | Sqm |
| 54 | 47 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001166 | 745.49 | Sqm |
| 55 | 48 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001167 | 4631.02 | Sqm |
| 56 | 49 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001168 | 1977.19 | Sqm |
| 57 | 50 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster (top of chajja) | BI01010001010000000000000515BI0100001169 | 12.16 | Sqm |
| 58 | 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (New work (two or more coats) over and including priming coat with cement primer) | BI01010001010000000000000515BI0100001170 | 6204.83 | Sqm |
| 59 | 52 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001171 | 5237.24 | Sqm |
| 60 | 53 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm | BI01010001010000000000000515BI0100001172 | 1775.09 | Sqm |
| 61 | 54 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | BI01010001010000000000000515BI0100001173 | 202.1 | Sqm |
| 62 | 55 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture | BI01010001010000000000000515BI0100001174 | 44.86 | Sqm |
| 63 | 56 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture | BI01010001010000000000000515BI0100001175 | 172.8 | Sqm |
| 64 | 57 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | BI01010001010000000000000515BI0100001176 | 1113.44 | Sqm |
| 65 | 58 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | BI01010001010000000000000515BI0100001177 | 165.12 | Rm |
| 66 | 59 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete | BI01010001010000000000000515BI0100001178 | 11 | Nos |
| 67 | 60 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. \n110 mm diameter(6Kg) | BI01010001010000000000000515BI0100001179 | 161.45 | Rm |
| 68 | 61 | Providing and fixing PVC soil, waste and vent pipes conforming to IS : 13592 Type A including jointing with seal ring c 5382 leaving 10 mm gap for thermal expansion, (i) Single sockete socketed pipes including all fittings like coupler , bends , tee etc complete. 75 mm diameter(6Kg) | BI01010001010000000000000515BI0100001180 | 100 | Rm |
| 69 | 62 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion | BI01010001010000000000000515BI0100001181 | ||
| 70 | 63 | 110 mm | BI01010001010000000000000515BI0100001182 | 22 | Nos |
| 71 | 64 | Bend 87.5 degree 110 mm bend | BI01010001010000000000000515BI0100001183 | 11 | Nos |
| 72 | 65 | Shoe (Plain) 110 mm Shoe | BI01010001010000000000000515BI0100001184 | 14 | Nos |
| 73 | 66 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including \n110 mm | BI01010001010000000000000515BI0100001185 | 33 | Nos |
| 74 | 67 | Constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1cement :4 coarse sand ) with C.c 1:2:4 floor over C.C 1:5:10 Finished with a floating coat of neat cement complete . | BI01010001010000000000000515BI0100001186 | 5 | Nos |
| 75 | 68 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg | BI01010001010000000000000515BI0100001187 | 5 | Nos |
| 76 | 69 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :\n(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.\n(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001188 | 83.22 | sqm |
| 77 | 70 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly he adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120mm and minimum thickness at khurra as 65 mm | BI01010001010000000000000515BI0100001189 | 171.76 | sqm |
| 78 | 71 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)\n | BI01010001010000000000000515BI0100001190 | 37.52 | cum |
| 79 | 72 | Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement 1:3 (1 cement : 3 fine sand) and finished neat With common burnt clay F.P.S. (non modular) brick tiles of class designation 10\n | BI01010001010000000000000515BI0100001191 | 92.5 | sqm |
| 80 | 73 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. | BI01010001010000000000000515BI0100001192 | ||
| 81 | 73.01 | 15 mm dia nominal bore | BI01010001010000000000000515BI0100001193 | 120 | Meter |
| 82 | 73.02 | 20 mm dia nominal bore | BI01010001010000000000000515BI0100001194 | 140 | Meter |
| 83 | 73.03 | 32 mm nominal bore | BI01010001010000000000000515BI0100001195 | 10 | Meter |
| 84 | 74 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 65 mm dia nominal bore | BI01010001010000000000000515BI0100001196 | 40 | Meter |
| 85 | 75 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : Every 5 Mtr. | BI01010001010000000000000515BI0100001197 | ||
| 86 | 75.01 | 15 mm nominal bore | BI01010001010000000000000515BI0100001198 | 24 | Nos. |
| 87 | 75.02 | 20 mm nominal bore | BI01010001010000000000000515BI0100001199 | 28 | Nos. |
| 88 | 75.03 | 32 mm nominal bore | BI01010001010000000000000515BI0100001200 | 2 | Nos. |
| 89 | 76 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore | BI01010001010000000000000515BI0100001201 | 28 | Nos |
| 90 | 77 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore | BI01010001010000000000000515BI0100001202 | 18 | Nos |
| 91 | 78 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | BI01010001010000000000000515BI0100001203 | 64 | Nos |
| 92 | 79 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : | BI01010001010000000000000515BI0100001204 | ||
| 93 | 79.01 | 20 mm nominal bore | BI01010001010000000000000515BI0100001205 | 30 | Nos |
| 94 | 79.02 | 25 mm nominal bore | BI01010001010000000000000515BI0100001206 | 40 | Nos |
| 95 | 80 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :\n32 mm nominal bore | BI01010001010000000000000515BI0100001207 | 2 | Nos |
| 96 | 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001208 | 20000 | Ltr. |
| 97 | 82 | Construction of embankment with approved material obtained from borrow pits (including cost of compensation for earth taken from private land) with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 | BI01010001010000000000000515BI0100001209 | 20 | cum |
| 98 | 83 | WBM Grading 1 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 404. By Mechanical Means | BI01010001010000000000000515BI0100001210 | 15 | cum |
| 99 | 84 | WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. | BI01010001010000000000000515BI0100001211 | 10 | cum |
| 100 | 85 | WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. By Mechanical Means | BI01010001010000000000000515BI0100001212 | 10 | cum |
| 101 | 86 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work.(Based on PWD specifications. | BI01010001010000000000000515BI0100001213 | 10 | cum |
| 102 | 87 | Cement Concrete Pavment:Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-25 (Cement@404 kg/cum), coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications. | BI01010001010000000000000515BI0100001214 | 10 | cum |
| 103 | 88 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001215 | 28 | Nos |
| 104 | 89 | Providing & fixing white vitreous china water less urinal of size 600 x330 x 315 mm having antibacterial /germs free ceramic surface,fixed with cartridge having debris catcher and hygiene seal. | BI01010001010000000000000515BI0100001216 | 9 | Nos |
| 105 | 90 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001217 | 18 | Nos |
| 106 | 91 | Providing and fixing soil , waste and vent pipes: S.C.I S&S pipe as per IS:1729 | BI01010001010000000000000515BI0100001218 | ||
| 107 | 91.01 | 100 mm dia | BI01010001010000000000000515BI0100001219 | 52 | Meter |
| 108 | 91.02 | 75 mm dia | BI01010001010000000000000515BI0100001220 | 70 | Meter |
| 109 | 92 | Providing and fixing M.S holder-bat clamps of approved design to PVC/Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. | BI01010001010000000000000515BI0100001221 | ||
| 110 | 92.01 | for 100 mm dia pipe | BI01010001010000000000000515BI0100001222 | 10.4 | Nos |
| 111 | 92.02 | for 75 mm dia pipe | BI01010001010000000000000515BI0100001223 | 14 | Nos |
| 112 | 93 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge | BI01010001010000000000000515BI0100001224 | 18 | Nos |
| 113 | 94 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931\n18.53.1 15mm nominal bore al bore | BI01010001010000000000000515BI0100001225 | 18 | Nos |
| 114 | 95 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia | BI01010001010000000000000515BI0100001226 | 18 | Nos |
| 115 | 96 | Providing and fixing terminal guard 100 mm Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001227 | 4 | Nos. |
| 116 | 97 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete | BI01010001010000000000000515BI0100001228 | ||
| 117 | 97.01 | 100 mm diameter pipe | BI01010001010000000000000515BI0100001229 | 28 | Nos |
| 118 | 97.02 | 75 mm diameter pipe | BI01010001010000000000000515BI0100001230 | 18 | Nos |
| 119 | 98 | Providing and fixing heel rest sanitary bend\n100 mm diameter pipe | BI01010001010000000000000515BI0100001231 | 27 | Nos |
| 120 | 99 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete \n100 mm diameter | BI01010001010000000000000515BI0100001232 | 60 | Meter |
| 121 | 100 | Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size) all round S.W pipe including bed concrete as per standard design: 100 mm diameter S. W. pipe | BI01010001010000000000000515BI0100001233 | 60 | Meter |
| 122 | 101 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: | BI01010001010000000000000515BI0100001234 | 8 | Nos |
| 123 | 102 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001235 | 8 | Nos |
| 124 | 103 | Extra depth for manholes Size 90x80 cm With F.P.S brick class designation 7.5 | BI01010001010000000000000515BI0100001236 | 3 | Meter |
| 125 | 104 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001237 | 66.34 | Sqm |
| 126 | 105 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001238 | 23.94 | Sqm |
| 127 | 106 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions | BI01010001010000000000000515BI0100001239 | 10 | NOS |
| 128 | 107 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement\nconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter | BI01010001010000000000000515BI0100001240 | 4 | NOS |
| 129 | 108 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of Class designation 7.5 | BI01010001010000000000000515BI0100001241 | 2 | NOS |
| 130 | 109 | WGSTLPT Point wiring in PVC conduit, with modular type switch.\nWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required\nGroup C | BI01010001010000000000000515BI0100001242 | 394 | Point |
| 131 | 110 | WGSTLMIDTC Twin Control point wiring in PVC conduit, with modular type switch:\nWiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. | BI01010001010000000000000515BI0100001243 | 14 | Point |
| 132 | 111 | WGSTLPP2 Power plug wiring in PVC conduit (2x4 sq. mm)\nWiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001244 | 638 | Mtr. |
| 133 | 112 | WGSTLSB Circuit/ submain wiring in PVC conduit: \nWiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required | BI01010001010000000000000515BI0100001245 | ||
| 134 | 112.01 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | BI01010001010000000000000515BI0100001246 | 75 | Mtr. |
| 135 | 112.02 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001247 | 3365 | Mtr. |
| 136 | 112.03 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001248 | 1440 | Mtr. |
| 137 | 113 | PVCCON S/F PVC conduit: \nSupplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.\n25mm | BI01010001010000000000000515BI0100001249 | 1440 | Mtr. |
| 138 | 114 | PTSWEB S/F modular type switch/ socket:\nSupplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001250 | ||
| 139 | 114.01 | 5/6 amps switch | BI01010001010000000000000515BI0100001251 | 126 | Each |
| 140 | 114.02 | 3 pin 5/6 amp socket outlet | BI01010001010000000000000515BI0100001252 | 80 | Each |
| 141 | 115 | MODFREB S/F modular type electronic fan regulator: Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required | BI01010001010000000000000515BI0100001253 | 50 | Each |
| 142 | 116 | LPACCPT S/F light plug point modular type accessories: Supplying and fixing suitable size GI box with modular plateand cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular\nswitch, connections etc. as required. | BI01010001010000000000000515BI0100001254 | 97 | Each |
| 143 | 117 | PPACCPT S/F power plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. | BI01010001010000000000000515BI0100001255 | 79 | Each |
| 144 | 118 | BRHOLD S/F brass holder: Supplying and flxing brass batten/angle holder including connection etc. as required. | BI01010001010000000000000515BI0100001256 | 107 | Each |
| 145 | 119 | ITCFFSUR ITC fluorescent fitting directly on surface: Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001257 | 201 | Each |
| 146 | 120 | ITCCFFC ITC ceiling fan with cover on fan box: Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. | BI01010001010000000000000515BI0100001258 | 61 | Each |
| 147 | 121 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. | BI01010001010000000000000515BI0100001259 | 8 | Each |
| 148 | 122 | ITCEF450 ITC exhaust fan upto 450 mm sweep: Installation of exhaust fan upto 450 mm sweep in the existingopening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required. | BI01010001010000000000000515BI0100001260 | 36 | Each |
| 149 | 123 | LOUSHEF Fixing louvers/shutters for exhaust fan: Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes. | BI01010001010000000000000515BI0100001261 | 36 | Each |
| 150 | 124 | PWTPMCBDB S/F TP MCB DB: Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) \n6 way (4 + 18), Double door (For Power) | BI01010001010000000000000515BI0100001262 | 6 | Each |
| 151 | 125 | MCBC S/F 'C' curve, SP MCB Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. \nSingle pole | BI01010001010000000000000515BI0100001263 | 6 | Each |
| 152 | 126 | MCBTPIS S/F TP MCB isolator: Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required. \n63 amps | BI01010001010000000000000515BI0100001264 | 48 | Each |
| 153 | 127 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required | BI01010001010000000000000515BI0100001265 | 3 | Set |
| 154 | 128 | EARG125X6 S/L 25 mm x 5 mm G.I. earth strip in ground: Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | BI01010001010000000000000515BI0100001266 | 40 | Mtr. |
| 155 | 129 | Supplying and flxing way, three pole and neutral, prewired, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper\nconductor up to terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, hosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ lsolator\n4 way (4 + 12), Double door | BI01010001010000000000000515BI0100001267 | 1 | nos |
| 156 | 130 | CEILLING FAN Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 3 nos. caps Model-ES-50 50 (1200 mm Sweep) etc. complete in all aspects as per direction of Engineer in Charge. \n1200 mm sweep | BI01010001010000000000000515BI0100001268 | 21 | Nos |
| 157 | 131 | Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete.Model- Ventil Air - DS (Make : Havells) 300 mm sweep 900 rpm ,complete in all aspects as per direction of Engineer in Charge. \n300 mm sweep 900 rpm | BI01010001010000000000000515BI0100001269 | 18 | Nos |
| 158 | 132 | SUPPLY OF LED Bulb B22 Ball Lamp, 9 W ,6000k /4000k/3000K ,230/250 VOLT,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge. (Make-Havells) | BI01010001010000000000000515BI0100001270 | 61 | Nos |
| 159 | 133 | Supply and fixing of LED Tube light 1200mm 20W ,Lumen Output-3000 ,4000,6500K Surface & wall mounted LED batten, extruded aluminium heat sink provided for efficient heat deissipation & integrated electronic driver. Model- E-Lite LED (Make-Havells) Triyca complet in all aspects as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001271 | 106 | Nos |
AI Tender Summary
Tender Timeline
Feb 02, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender