Ambedkar University Delhi has published Repair Of Toilets And Water Proofing Work Of L Block At Karmpura Campus Of Ambedkar University Delhi , Delhi - 110006. Submission Date for this Tender is 08-03-2021. Water Proofing Work Tenders in Ambedkar University Delhi, Lothian Road, Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Feb-2021 | Corrigendum No 1 | Date | 01-03-2021 |
| 2 | 01-Mar-2021 | Corrgendum No 2 | Date | 08-03-2021 |
| 3 | 08-Mar-2021 | Corrgendum no 3 | Financial Bid | 08-03-2021 |
| Name of Work: Repair of toilets and water proofing work of L-Block at Karmpura Campus of Dr. B R Ambedkar University Delhi, Delhi 110006 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying\nmotor vehicle of 3.5 cum or more. | BI01010001010000000000000515BI0100001113 | 17.75 | cum |
| 3 | 1.02 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001114 | 10.38 | cum |
| 4 | 1.03 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand | BI01010001010000000000000515BI0100001114 | 1.15 | cum |
| 5 | 1.04 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001114 | 29.17 | sqm |
| 6 | 1.05 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | BI01010001010000000000000515BI0100001114 | 29.17 | sqm |
| 7 | 1.06 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001114 | 4 | Each |
| 8 | 1.07 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | BI01010001010000000000000515BI0100001114 | 24 | Each |
| 9 | 1.08 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | BI01010001010000000000000515BI0100001114 | 42 | Each |
| 10 | 1.09 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | BI01010001010000000000000515BI0100001114 | 48 | Each |
| 11 | 1.1 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper | BI01010001010000000000000515BI0100001114 | 24 | Each |
| 12 | 1.11 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete | BI01010001010000000000000515BI0100001114 | 92.8 | sqm |
| 13 | 1.12 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | BI01010001010000000000000515BI0100001114 | 8 | Each |
| 14 | 1.13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter | BI01010001010000000000000515BI0100001114 | 18 | meter |
| 15 | 1.14 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend | BI01010001010000000000000515BI0100001114 | 4 | Each |
| 16 | 1.15 | CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | BI01010001010000000000000515BI0100001114 | 211.08 | sqm |
| 17 | 1.16 | Neat cement punning. | BI01010001010000000000000515BI0100001114 | 10 | sqm |
| 18 | 1.17 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm) | BI01010001010000000000000515BI0100001114 | 189.5 | sqm |
| 19 | 1.18 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001114 | 111.78 | sqm |
| 20 | 1.19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | BI01010001010000000000000515BI0100001114 | 53.18 | sqm |
| 21 | 1.2 | Distempering with 1st quality acrylic distemper, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approved brand and m anufacture, including applying additional coats wherever required,to achieve even shade and colour. Two coats | BI01010001010000000000000515BI0100001114 | 78.53 | sqm |
| 22 | 1.21 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001114 | 50.72 | sqm |
| 23 | 1.22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | BI01010001010000000000000515BI0100001114 | 65.25 | sqm |
| 24 | 1.23 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1cement: 4 coarse sand | BI01010001010000000000000515BI0100001114 | 4.5 | sqm |
| 25 | 1.24 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001114 | 31.6 | sqm |
| 26 | 1.25 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001114 | 40 | Each |
| 27 | 1.26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001114 | 0.45 | cum |
| 28 | 1.27 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001114 | 211.08 | sqm |
| 29 | 1.28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia | BI01010001010000000000000515BI0100001114 | 28 | Each |
| 30 | 1.29 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001114 | 5 | Each |
| 31 | 1.3 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore with 45 cm length | BI01010001010000000000000515BI0100001114 | 38 | Each |
| 32 | 1.31 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore | BI01010001010000000000000515BI0100001114 | 38 | Each |
| 33 | 1.32 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001114 | 325.48 | Kg |
| 34 | 1.33 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width | BI01010001010000000000000515BI0100001114 | 130.19 | meter |
| 35 | 1.34 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patternshaving NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | BI01010001010000000000000515BI0100001114 | 27.95 | sqm |
| 36 | 1.35 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. | BI01010001010000000000000515BI0100001114 | 486.13 | sqm |
| 37 | 1.36 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | BI01010001010000000000000515BI0100001114 | 171.9 | meter |
| 38 | 1.37 | Providing and fixing 5mm acrylic plastic sheet all labour and materials, fittings, etc., complete as per direction of Engineer in Charge. | BI01010001010000000000000515BI0100001114 | 5.85 | sqm |
| 39 | 1.38 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Ref.DSR Item No.11.27 | BI01010001010000000000000515BI0100001114 | 155.7 | sqm |
| 40 | 1.39 | Replacement of damaged gypsum board in ceiling with new 12.5mm thick gypsum board including fixing to ceiling section with dry wall screws and including jointing and taping to flush finish but excluding the cost of GI framing | BI01010001010000000000000515BI0100001114 | 30.05 | sqm |
| 41 | 1.4 | Providing and fixing Pressmatic(Pillar Cock auto closing system ) including all fittings and fixtures etc.complete. | BI01010001010000000000000515BI0100001114 | 8 | Each |
| 42 | 1.41 | Providing and fixing 110mm dia PVC Floor trap includding fitting, fixing etc. complete as per direction. | BI01010001010000000000000515BI0100001114 | 2 | Each |
| 43 | 1.42 | P/F new C.P. brass health faucet with one Meter long flexible tube & wall hook complete in all respect ( approved Make) | BI01010001010000000000000515BI0100001114 | 10 | Each |
| 44 | 1.43 | Dismanting of existing IWC with cistern with all connection including connection pipes, angle wall etc. | BI01010001010000000000000515BI0100001114 | 6 | Each |
| 45 | 1.44 | Providing and fixing Ist quality rectified ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001114 | 4 | sqm |
| 46 | 1.45 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | 5 | Each |
| 47 | 1.46 | Dismantling tile work in floors, wall and roofs etc laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 8 mm to 25 mm | BI01010001010000000000000515BI0100001114 | 87.4 | sqm |
| 48 | 1.47 | Providing and laying water proofing cement plaster treatment over te roof consisting of following applications:\n(A) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.\n(B) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel as per direction by Engineer-in-charge | BI01010001010000000000000515BI0100001114 | 641.83 | sqm |
| 49 | 1.48 | Carefully removing existing water proofing plaster of thickness up to 25mm from cement based waterproofing treatment on the terrace including dressing and stacking the rubish within 50 mtr lead. | BI01010001010000000000000515BI0100001114 | 641.83 | sqm |
| 50 | 1.49 | Carefully cleaning of existing wall and floor tile as per directions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | 369 | sqm |
| 51 | 2 | ELECTRICAL | |||
| 52 | 2.01 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 8 Module | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 53 | 2.02 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness | BI01010001010000000000000515BI0100001114 | 45 | meter |
| 54 | 2.03 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness | BI01010001010000000000000515BI0100001114 | 55 | meter |
| 55 | 2.04 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) | BI01010001010000000000000515BI0100001114 | 50 | meter |
| 56 | 2.05 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 4 sq. mm (16 mm) Details of cost for 1 Set | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 57 | 2.06 | Supplying, Installation, Testing and Commisioning of recessed mounted circular LED downlight fixture, min 15 watt in false ceiling with high efficient LEDs & Glare free opal diffuser, IP 20 complete with driver (constant current and constant voltage) complete in every way as required. [Philips Astra Prime 15-Watt Recessed LED Panel Ceiling Light (Warm Light, Round) Part No. 919215850453 or its equivalent] | BI01010001010000000000000515BI0100001114 | 15 | Each |
| 58 | 2.07 | Supply and Installation of highly efficient LED flood light made of pressure die cast aluminium housing, suitable lens & enclosed with toughened glass IP 66 (CAT Ref. HLFLD-ML01-120-CWL-R or equivalent) | BI01010001010000000000000515BI0100001114 | 15 | Each |
| 59 | 2.08 | Supply of 1.1 KV grade XLPE aroumoured aluminium conductor cable of size 2 x 4 Sq mm. | BI01010001010000000000000515BI0100001114 | 50 | meter |
| 60 | 2.09 | Supplying installation testing and commissioning of heavy duty exhaust fan of 380mm/15" sweep 1400 rpm and 160 watt power input on the existing ventilator. (Halonix Krypton HDEF) | BI01010001010000000000000515BI0100001114 | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
