| 1 | 1 | DEEPENING WELL | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.001 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001114 | 12.56 | cum |
|---|
| 3 | 1.002 | 2.7.3 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited | BI01010001010000000000000515BI0100001115 | 37.68 | cum |
|---|
| 4 | 1.003 | 2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock | BI01010001010000000000000515BI0100001116 | 301.44 | cum |
|---|
| 5 | 1.004 | 60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete | BI01010001010000000000000515BI0100001117 | 90 | hour |
|---|
| 6 | 1.005 | 5.7 : Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001118 | 9.42 | cum |
|---|
| 7 | 1.006 | 5.9.12 : Centering and shuttering including strutting, etc. and removal of form for:Well steining | BI01010001010000000000000515BI0100001119 | 98.91 | sqm |
|---|
| 8 | 1.007 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001120 | 471 | kg |
|---|
| 9 | 1.008 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001121 | 44 | kg |
|---|
| 10 | 1.009 | od1063285/2020_2021 : Providing and fixing good quality granite name board with lettering including all cost of materials, conveyance , labor charge etc. complete | BI01010001010000000000000515BI0100001122 | 1 | each |
|---|
