Rural Development Local Bodies Closing in 0 days TDR #26801408

Re-Tender Vandanmedu Gp 2020-21 Chettukuzhy Shopping Complex Completion Project No 175

Issued by Local Bodies · VANDANMEDU, Kerala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Feb 2021
0 days left
EMD
22500
Bank guarantee accepted
Document Fee
1800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
VANDANMEDU → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Re-Tender Vandanmedu Gp 2020-21 Chettukuzhy Shopping Complex Completion Project No 175

BOQ

Work Name:VANDANMEDU GP 2020-21 CHETTUKUZHY SHOPPING COMPLEX COMPLETION PROJECT NO 175
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Building -First Floor,Toilet and Retaining WallBI01010001010000000000000515BI0100001113
21.00113.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)BI01010001010000000000000515BI0100001114145.67sqm
31.00213.37.1 : White washing with lime to give an even shade:New work (three or more coats)BI01010001010000000000000515BI0100001115689.1sqm
41.00350.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc completeBI01010001010000000000000515BI01000011162.496cum
51.00411.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregateBI01010001010000000000000515BI010000111770.2sqm
61.00510.6.2 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top coverBI01010001010000000000000515BI010000111861.95sqm
71.0062.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soilBI01010001010000000000000515BI010000111939.219cum
81.0072.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soilBI01010001010000000000000515BI01000011201.296cum
91.00860.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at siteBI01010001010000000000000515BI01000011211.296cum
101.0094.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)BI01010001010000000000000515BI010000112216.673cum
111.015.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)BI01010001010000000000000515BI01000011235.525cum
121.0114.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.BI01010001010000000000000515BI010000112443.2sqm
131.0124.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)BI01010001010000000000000515BI01000011250.765cum
141.0135.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).BI01010001010000000000000515BI01000011265.004cum
151.0145.7 : Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)BI01010001010000000000000515BI01000011270.189cum
161.0155.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.BI01010001010000000000000515BI010000112831.668sqm
171.0165.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantileversBI01010001010000000000000515BI01000011293.705sqm
181.0175.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platformBI01010001010000000000000515BI010000113026.14sqm
191.0185.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or moreBI01010001010000000000000515BI0100001131616.1kilogram
201.01919.18.2 : Supplying and fixing C.I with out frame for manholes:500 mm diameter C.I. (medium duty) the weight of the cover to be not less than 58 kgBI01010001010000000000000515BI01000011322each
211.026.2.2 : Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)BI01010001010000000000000515BI01000011333.132cum
221.02110.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksBI01010001010000000000000515BI0100001134315.852kg
231.02213.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coatsBI01010001010000000000000515BI010000113532.98sqm
241.02317.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar tapsBI01010001010000000000000515BI01000011362each
251.02450.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wallBI01010001010000000000000515BI010000113710metre
261.02550.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2BI01010001010000000000000515BI010000113810metre
271.02650.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2BI01010001010000000000000515BI010000113912metre
281.02750.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia BendBI01010001010000000000000515BI01000011404no
291.02850.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door teeBI01010001010000000000000515BI01000011412no
301.02950.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2BI01010001010000000000000515BI010000114219metre
311.0318.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.BI01010001010000000000000515BI01000011431000Litre
321.03118.56.2 : Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gmsBI01010001010000000000000515BI01000011444each
331.03218.58.2.1 : Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round gratingBI01010001010000000000000515BI01000011452each
341.03318.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.BI01010001010000000000000515BI01000011462each
351.034od938146/2020_2021 : Supplying and fixing ventilatarBI01010001010000000000000515BI01000011472no
361.035od938526/2020_2021 : Supplying and fixing ventilator shutter using aluminium powder coated frames and plain glass 4 mm tick of size 0.40 x 0.35 m or nearest sizeBI01010001010000000000000515BI01000011482each
371.036od938147/2020_2021 : Supplying and fixing factory made PVC door shutter 35 mm thick including all cost of fittings labour charge etc complete.BI01010001010000000000000515BI01000011492.775sqm
381.037od938148/2020_2021 : Supplying and fixing RCC Door frame 80*195BI01010001010000000000000515BI01000011502each
391.03811.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.BI01010001010000000000000515BI010000115116.2sqm
401.0394.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)BI01010001010000000000000515BI01000011520.54cum
411.0411.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.BI01010001010000000000000515BI01000011536.72sqm
421.04117.2.2 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lidBI01010001010000000000000515BI01000011542each
431.042od938467/2020_2021 : Providing and fixing good quality granite name board with lettering including all cost of materials, conveyance , labor charge etc. completeBI01010001010000000000000515BI01000011551each

AI Tender Summary

OUR REF NO 26801408
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 09-02-2021
Authority
Authority Name Grama Panchayat
Work Description Re-Tender Vandanmedu Gp 2020-21 Chettukuzhy Shopping Complex Completion Project No 175
Basic Detail
Tender No 78/AE/LSGD/VNMDGP/2020-21
Bidding Type Tender
Location
City VANDANMEDU
State Kerala
Key Dates
Publish Date 02 Feb 2021
Submission Date 09 Feb 2021
Open Date 12 Feb 2021
Finance
Tender Value Ref. Documents
Tender Fee 1800
EMD 22500
Exemption Not Available
Document List
42E9EFB0-2BCC-4E7B-8C29-CA59D3934E51.html
BOQ_583852.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 02, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 09, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 12, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

42E9EFB0-2BCC-4E7B-8C29-CA59D3934E51.html

xls

BOQ_583852.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders