| 1 | 1 | Road Tarring | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.001 | 3.15.2 : Compacting Original Ground<br>\n(ii) Compacting original ground supporting subgrade<br>\nLoosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. | BI01010001010000000000000515BI0100001114 | 255.6 | cum |
|---|
| 3 | 1.002 | 3.5.2 : Excavation in Soil with Dozer with lead upto 100 m\t\t\t<br>\nExcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. | BI01010001010000000000000515BI0100001115 | 287.85 | cum |
|---|
| 4 | 1.003 | 4.9 : Wet Mix Macadam\t<br>\t\t\nProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.\t\t<br>\t\nBy Mechanical Means with 1 km lead | BI01010001010000000000000515BI0100001116 | 288.45 | cum |
|---|
| 5 | 1.004 | 75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 | BI01010001010000000000000515BI0100001117 | 1923 | sqm |
|---|
| 6 | 1.005 | 75.5.2.3pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. | BI01010001010000000000000515BI0100001118 | 1923 | sqm |
|---|
| 7 | 1.006 | 75.5.9.2.2.Pa : Plastic Roads - Bitumen S-65 <br>\n20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder\t<br>\nProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic)\t<br>\nCase - I By Manual Means\t<br>\n(II)\tBitumen (S-65) (VG - 30) | BI01010001010000000000000515BI0100001119 | 1923 | sqm |
|---|
| 8 | 1.007 | 75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510\t<br>\nA.\tBy Manual Means\t<br>\nCase III : Type C\t<br>\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001120 | 1923 | sqm |
|---|
| 9 | 1.008 | 11.4.3.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203III.P.C.C. grade M 20 (i)Nominal mix (1:2:4) | BI01010001010000000000000515BI0100001121 | 31.95 | cum |
|---|
| 10 | 1.009 | od868021/2020_2021 : Filling With Quarry muck<br>Filling up low laying and water logged areas with local material/quarry muck,spreading in layers, leveling top at the siteand consolidation by ramming etc.. complete for improving the CBR value of sub grade | BI01010001010000000000000515BI0100001122 | 15.975 | cum |
|---|
| 11 | 1.01 | od1028220/2020_2021 : Filling with contractor"s own earth (excluding rock)in open areas in layers exceeding 20cm in depth consolidated each deposited layer by ramming and watering lead up to 50m and lift up to 1.5 m as per direction of site engineer-in-charge | BI01010001010000000000000515BI0100001123 | 31.725 | Cum cm |
|---|
| 12 | 1.011 | 10.4.A.1 : Direction and Place Identification signs with size more than 0.9 sqm size board\t<br>\t\t\nA.\tRetro-reflectorised Traffic Signs\t\t<br>\n1\tProviding and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 | BI01010001010000000000000515BI0100001124 | 1 | sqm |
|---|
