Estimate For Special Repair Of Type-I And Ii Qtrs . ( 22 Sets ) In Hpsebl , Residential Colony At Bharari In District Shimla , Himachal Pradesh Estimate For Special Repair Of Type-I And Ii Qtrs . 22 Sets In Hpsebl , Residential Colony At Bharari In
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Feb 2021
0 days left
EMD
33022
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharari → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For Special Repair Of Type-I And Ii Qtrs . ( 22 Sets ) In Hpsebl , Residential Colony At Bharari In District Shimla , Himachal Pradesh Estimate For Special Repair Of Type-I And Ii Qtrs . 22 Sets In Hpsebl , Residential Colony At Bharari In District Shimla , Himachal Pradesh
BOQ
| Name of Work:Special Repair of Type- I & II Qtrs. (22 Sets) in HPSEBL, colony at Bharari | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Qty | Units | |
| 1 | 1 | Demolition below G.L. upto1.50Metres depth and disposal of unserviceable materials within 20 metres lead. Un-reinforced cement concrete upto 15 cm. Thickness. | 1 | 5.94 | m3 |
| 2 | 2 | Demolition above G.L. upto floor two level and disposal of unserviceable materials within 20 metres lead. Un-reinforced cement concrete upto 15 cm. Thickness. | 2 | 1.12 | m3 |
| 3 | 3 | Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serciceable materials and disposal of un-serviceable materials Within 20 meters lead.:- G.I.Sheet roofing | 3 | 161.6 | m2 |
| 4 | 4 | Fixing of corrugated G.I.sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8mm diameter with bitumen and G.I.limpet washers filled with white lead complete excluding the cost of purlin rafter and trusses. 0.63 mmthick sheet | 4 | 161.6 | m2 |
| 5 | 5 | Poroviding and fixing 40 cm wide 120 cm overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nutesand washers etc.including making necessary connections with rain water pipe complete as per design.0.63mm thick sheet. | 5 | 169.4 | Rmt. |
| 6 | 6 | Providing form work with steel plate 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish i/c centering shuttering strutting and propping etc. with wooden battens and bellies height of propping and centering below supporting floor to the ceiling not a exceeding 4 m ,and removal of the same for insitureinforced concrete and plain concrete work in : | 6 | 11.16 | m3 |
| 7 | 7 | P/L cement concrete work 1:2:4(1cement :2sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of reinforced concrete work in :form work and reinforcement for | 7 | 1.12 | m3 |
| 8 | 8 | 15mm cement plaster in single on fair side of brick/concrete /stone walls for interior plastering up to floor two level including arrises internal rounded angles , chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth Cement mortar 1:4(1cement 4sand). | 8 | 252.8 | m2 |
| 9 | 9 | Whit glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) finished with flush pointing in white cement for wall . | 9 | 122.94 | M2 |
| 10 | 10 | White glazed tile 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 (1cement 3 sand ) and jointed with cement slurry. | 10 | 528.66 | m2 |
| 11 | 11 | Providing and laying granite stone in flooring 20mm, (average) thickness base of cement mortar 1:3 (1 cement 3sand0 laid over and jointed with grey cement slury mixed with pigment tomatch th3e fshade of granite stone i/c rubbing and polisghing complete. 20mm thick | 11 | 36.75 | M2 |
| 12 | 12 | Distempering (two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paper smooth , priming coat with distemper primer | 12 | 2367.55 | m2 |
| 13 | 13 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats ) to give an even shades after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. | 13 | 1791 | m2 |
| 14 | 14 | Painting two coats (excluding priming coat ) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter:--with white ready mixed paint | 14 | 917.16 | m2 |
| 15 | 15 | Steel work welded in built up section trusses and framed work, including cutting, hoisting and fixing in position and applying a red lead paint in beams joists channels,angles tees, flats with connection plates or angles cleats as in main and cross beams hip and jack rafters purlins connected to common rafters and the like. | 15 | 2.34 | Qtl. |
| 16 | 16 | P/F to wall ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps i/c making good the wall ceiling and floor:- 15mm nominal bore. | 16 | 252 | Rmt |
| 17 | 17 | Providing and Fixing C.P.Brass bib tap with Capstan head 15mm dia | 17 | 54 | Each |
| 18 | 18 | Providing and Fixing C.P.Brass angle valve with Capstan head 15mm dia without Nuts and pipe. | 18 | 36 | Each |
| 19 | 19 | Providing and fixing PVC Connection with brass unions:- 300/450mm length 15mm nominal bore | 19 | 18 | Each |
| 20 | 20 | P/f vitreous china wash ,down water closet (European type W.C. pan) with integral “p” or “s” trap i/c. jointing the trap with soil pipe in cement. Mortar 1:1 (1cement 1 sand) seat and cover to be measured and paid for separately): - Angle Indian (universal closet). | 20 | 20 | each |
| 21 | 21 | Providing and fixing stainless steel kitchen sink of approved standard with drain board and C.P. waste with C.I. or M.S Brackets painted white including cutting holes and making good thesame but excluding fitting including carriage of material in all leads and lifts 610 x 460 mm with bowl depth 200 mm. | 21 | 18 | Each |
| 22 | 22 | Providing and fixing PTMT Coloured /white high density polyethylene / poly propylene 10 litres capacity (full flush) European standard controllow level flushing cistern with a pair of C.I or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P Brass handle, unions and coupling for connections with inlet, outlets and overflow pipes, 40mm dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). | 22 | 20 | Each |
| 23 | 23 | P/F plastic seat (solid/ Hollow type) and cover for wash down water closet with C.P Brass hinges and rubbed buffers a.) White plastic seat and cover | 23 | 18 | Each |
| 24 | 24 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhsive, cost of cutting and making good the walland floors etc. complete including carriage of material in leads and lifts MAKE FINOLEX, SUPREME. 110mm X75mm | 24 | 54 | Each |
| 25 | 25 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked includinkg fixing with approved adhesive etc.complete. 110mm dia | 25 | 216 | Rmt. |
| 26 | 25.01 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked includinkg fixing with approved adhesive etc.complete. 75mmdia | 26 | 64 | Rmt. |
| 27 | 26 | P/F PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 110mm | 27 | 24 | Each |
| 28 | 26.01 | P/F PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75mm | 28 | 16 | Each |
| 29 | 27 | P/f PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.(1) 110mm | 29 | 8 | each |
| 30 | 27.01 | P/f PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc 75mm | 30 | 12 | each |
| 31 | 28 | P/F Single equal branch of required degree with oval access door insertion rubber washer 3mm thick bolts nuts complete. (i) 75mm dia | 31 | 38 | Each |
| 32 | 28.01 | P/F Single equal branch of required degree with oval access door insertion rubber washer 3mm thick bolts nuts complete 100mm | 32 | 18 | Each |
| 33 | 29 | Providing and fixing PVC Collar:-(1) 110mm nominal size | 33 | 18 | each |
| 34 | 29.01 | Providing and fixing PVC Collar: 75mm | 34 | 54 | Each |
| 35 | 30 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws :- 750X20mm | 35 | 22 | Each |
| 36 | 31 | Providing and fixing Toilet paper holder:- C.P.Brass | 36 | 18 | Each |
| 37 | 32 | Providing and fixing liquid soap container with C. P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws :- Glass container | 37 | 20 | Each |
| 38 | 33 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6mm .AC sheet or plywood sheet fixed to wooden plugs CP brass screws & washers. | 38 | 21 | each |
| 39 | 34 | P/f .CP. brass waste for wash basin or sink ;- 40mm dia. | 39 | 20 | each |
AI Tender Summary
Tender Timeline
Feb 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender