Supply Of Electrician Trade Tools & Equipment For The Up Gradation Of Priority Itis Under Ukwd Project
Tender Overview
Project Description
Supply Of Electrician Trade Tools & Equipment For The Up Gradation Of Priority Itis Under Ukwd Project-1 Trade Name : Electrician 2 A C Energy Meter Induction Type, 3 Phase 3 A C Energy Meter Single Phase K.W.H Meter Induction Type 4 A C Starters. Ac Motors - Resistance Type Starter 5 A.C Volt Meter M I Analog, Portable Box Type Housed In Bakelite Case 6 Ac Ammeter M I, Analog Portable Box Type Housed In Bakelite Case 7 Allen Key Alloy Steel Set 8 Ammeter Mc Analog Portable Box Type Housed In Bakelite Case 0-25A 9 Ammeter Mc Analog Portable Box Type Housed In Bakelite Case 0-5A 10 Ammeter Mc Analog Portable Housed In Bakelite Case 0-500Ma 11 Battery Charger 12 Bearing Puller Inside And Outside 13 Bradawl 14 Brake Test Arrangement With Two Spring Balance Rating 15 Bus Bar With Brackets ( 1 Meter Each ) 16 C- Clamp - 150 Mm 17 C- Clamp - 200 Mm 18 Cables : Twisted Pair Non-Metallic Sheathed Cable Underground Feeder Cable Ribbon Cable Metallic Sheathed Cable Multi-Conductor Cable Coaxial Cable Direct-Buried Cable 19 Chisel Firmer With Wooden Handle 20 Contactor And Auxiliary Contacts 3 Phase, 440 Volts; Ac-3, 32 A 21 Contactor And Auxiliary Contacts3 Phase, 440 Volts; Nac-3, 16 A 22 Copper Bit Soldering Iron ( 65 W ) 23 Crimping Tool 16 To 95 Square Mm 24 Crimping Tool Size: 250Mm ( L ) 25 Current Transformer 26 Dc Power Supply 27 Dc Starter, 3-Point 28 Dc Starter, 4-Point 29 De Metric Spanner Double Ended ( Set ) 30 De-Soldering Gun 31 Digital Multimeter 32 Digital Wattmeter 33 Divider 150 Mm Spring Type 34 Drill Hand Brace 35 Earth Electrode 36 Earth Plate 37 Elcb And Rccb 38 Electrician Helmet 39 File Flat Bastard Size: 250Mm 40 File Flat Rough Size: 150Mm 41 File Flat Size: 200Mm 42 File Half Round Size: 200Mm 43 File Rasp, Half Round Size: 200Mm 44 File Round Size: 200Mm 45 Fire Buckets 46 Fire Extinguisher Co2 47 Frequency Meter 48 Function Generator 49 Gauge, Wire Imperial Stainless Steel Marked In Swg & Mm 50 Grease Gun 51 Growler 52 Hacksaw Frame ( 150Mm ) 53 Hacksaw Frame ( 300 Mm ) 54 Hammer Extractor Type 55 Hammer, Ball Peen With Handle 0.5Kg 56 Hand Drill Machine 57 Hand Vice ( Length: 50 Mm ) 58 Hydrometer 59 Inside Calliper Size: 150 Mm 60 Kilowatt Meter Analog 61 Knife Switch Dpdt Fitted With Fuse Terminals 62 Knife Switch Tpdt Fitted With Fuse Terminals 63 Laboratory Type Induction Coil 64 Limit Switch 65 Load Bank Lamp / Heater Type 66 Luxmeter 67 Magnetic Flux Meter 68 Mallet Hard Wood 69 Mccb 70 Megger 71 Milli Voltmeter Centre Zero Analog, Portable Box Type Housed In Bakelite Case 72 Miniature Breaker 73 Ohm Meter Series Type Portable Box Type 74 Ohm Meter Shunt Type Portable Box Type 75 Oil Can 76 Oil Testing Kit 77 Out Side Micrometer 78 Outside Calliper 79 Phase Sequence Indicator 80 Pin Type, Shackle Type, Egg Type & Suspension Type Insulators Including Hardware Fitting 81 Pipe Vice Cast Iron With Hardened Jaw Open Type 82 Plane, Cutters 83 Plier, Long Nose Insulated 84 Pliers Flat Nose Insulated 85 Pliers Round Nose Insulated 86 Portable Electric Drill Machine 87 Potential Transformer 88 Power Factor Meter Digital 89 Pulley Puller With 3 Legs ( 150Mm ) 90 Pulley Puller With 3 Legs ( 300 Mm ) 91 Rcc Pole With Accessories ( Ms Angle Iron, ‘C’ Clamp, Stay Insulator Etc. ) And Materials 92 Relays - Cut Out 93 Relays - Reverse Current 94 Relays - Under Voltage 95 Relays – Over Current 96 Rheostat ( Sliding Type ) 0-25 Ohm, 97 Rheostat ( Sliding Type ) 0-300 Ohm 98 Rheostat ( Sliding Type ) 0-10 Ohm, 5 A 99 Rheostat ( Sliding Type ) 0-10Hm, 10 A, 100 Rotary Switch 101 Rubber Mat 102 Safety Belt 103 Single Phase Transformer Core Type, Air Cooled 104 Single Phase Variable Auto Transformer 105 Smoothing Cutters 106 Snip Straight And Bent Heavy Duty 107 Soft Starter 1Ph 108 Solar Panel With Battery 109 Soldering Iron ( 25 W, 65 W And 120 W ) Set Of 2 No 110 Spanner Adjustable Drop Forged , Ss 150 Mm Length 111 Spanner Adjustable Drop Forged, Ss 300 Mm Length 112 Starters For 2 To 5 H.P. A.C Motors - Auto Transformer Type 113 Starters For 2 To 5 H.P. Ac Motors - Direct On-Line Starter 114 Starters For 2 To 5 H.P. Ac Motors - Star Delta Starter - Manual, 115 Starters For 2 To 5 H.P. Ac Motors - Star Delta Starter Fully Automatic 116 Starters For 2 To 5 H.P. Ac Motors - Star Delta Starter Semi-Automatic 117 Table Vice 118 Tachometer ( Analog Type ) 119 Tachometer ( Sensor Type Digital ) 120 Temperature Controlled Soldering Iron ( 50 Watts ) 121 Thermometer Digital 122 Tong Tester / Clamp Meter 123 Try Square 124 Tweezers 125 Voltage Stabilizer 126 Wheatstone Bridge With Galvanometer And Battery 127 Wire Cutter And Stripper
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Feb-2021 | Corrigendum No 2 | BOQ | 20-Feb-2021 |
| 2 | 18-Feb-2021 | Date Extension | Date | 01-Mar-2021 |
BOQ
| Name of Work:Supply of Electrician Trade Tools & Equipment for the up gradation of Priority ITIs under UKWD Project | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | TRADE NAME : ELECTRICIAN | |||
| 2 | 1.01 | A C Energy Meter Induction type, 3 Phase | item1 | 18 | Nos |
| 3 | 1.02 | A C Energy Meter Single phase K.W.H meter Induction Type | item2 | 17 | Nos |
| 4 | 1.03 | A C Starters. AC Motors - Resistance type starter | item3 | 7 | Nos |
| 5 | 1.04 | A.C Volt Meter M I analog, portable box type housed in Bakelite case | item4 | 24 | Nos |
| 6 | 1.05 | AC Ammeter M I, Analog portable box type housed in Bakelite case | item5 | 17 | Nos |
| 7 | 1.06 | Allen key Alloy Steel set | item6 | 2 | Nos |
| 8 | 1.07 | Ammeter MC Analog portable box type housed in Bakelite case 0-25A | item7 | 19 | Nos |
| 9 | 1.08 | Ammeter MC Analog portable box type housed in Bakelite case 0-5A | item8 | 19 | Nos |
| 10 | 1.09 | Ammeter MC Analog portable housed in Bakelite case 0-500mA | item9 | 18 | Nos |
| 11 | 1.1 | Battery Charger | item10 | 5 | Nos |
| 12 | 1.11 | Bearing puller inside and outside | item11 | 4 | Nos |
| 13 | 1.12 | Bradawl | item12 | 2 | Nos |
| 14 | 1.13 | Brake test arrangement with two spring balance Rating | item13 | 5 | Nos |
| 15 | 1.14 | Bus bar with brackets (1 meter each) | item14 | 33 | Nos |
| 16 | 1.15 | C- Clamp - 150 mm | item15 | 4 | Nos |
| 17 | 1.16 | C- Clamp - 200 mm | item16 | 4 | Nos |
| 18 | 1.17 | Cables : Twisted Pair Non-Metallic Sheathed Cable Underground Feeder Cable Ribbon Cable Metallic Sheathed Cable Multi-Conductor Cable Coaxial Cable Direct-Buried Cable | item17 | 11 | Nos |
| 19 | 1.18 | Chisel firmer with wooden Handle | item18 | 2 | Nos |
| 20 | 1.19 | Contactor and auxiliary Contacts 3 phase, 440 volts; AC-3, 32 A | item19 | 13 | Nos |
| 21 | 1.2 | Contactor and Auxiliary Contacts3 phase, 440 volts;\nAC-3, 16 A | item20 | 15 | Nos |
| 22 | 1.21 | Copper Bit Soldering Iron(65 W) | item21 | 6 | Nos |
| 23 | 1.22 | Crimping tool 16 to 95 square mm | item22 | 19 | Nos |
| 24 | 1.23 | Crimping tool Size: 250mm (L) | item23 | 12 | Nos |
| 25 | 1.24 | Current Transformer | item24 | 8 | Nos |
| 26 | 1.25 | DC Power supply | item25 | 11 | Nos |
| 27 | 1.26 | DC Starter, 3-point | item26 | 4 | Nos |
| 28 | 1.27 | DC Starter,4-point | item27 | 5 | Nos |
| 29 | 1.28 | DE metric spanner Double Ended (set) | item28 | 6 | Nos |
| 30 | 1.29 | De-soldering gun | item29 | 36 | Nos |
| 31 | 1.3 | Digital Multimeter | item30 | 86 | Nos |
| 32 | 1.31 | Digital Wattmeter | item31 | 22 | Nos |
| 33 | 1.32 | Divider 150 mm spring type | item32 | 16 | Nos |
| 34 | 1.33 | Drill hand brace | item33 | 24 | Nos |
| 35 | 1.34 | Earth Electrode | item34 | 11 | Nos |
| 36 | 1.35 | Earth Plate | item35 | 11 | Nos |
| 37 | 1.36 | ELCB and RCCB | item36 | 11 | Nos |
| 38 | 1.37 | Electrician Helmet | item37 | 22 | Nos |
| 39 | 1.38 | File flat Bastard Size: 250mm | item38 | 4 | Nos |
| 40 | 1.39 | File flat Rough Size: 150mm | item39 | 8 | Nos |
| 41 | 1.4 | File flat Size: 200mm | item40 | 31 | Nos |
| 42 | 1.41 | File half round Size: 200mm | item41 | 8 | Nos |
| 43 | 1.42 | File Rasp, half round Size: 200mm | item42 | 12 | Nos |
| 44 | 1.43 | File round Size: 200mm | item43 | 4 | Nos |
| 45 | 1.44 | Fire buckets | item44 | 11 | Nos |
| 46 | 1.45 | Fire Extinguisher CO2 | item45 | 10 | Nos |
| 47 | 1.46 | Frequency Meter | item46 | 9 | Nos |
| 48 | 1.47 | Function Generator | item47 | 5 | Nos |
| 49 | 1.48 | Gauge, wire imperial Stainless steel marked in SWG & mm | item48 | 13 | Nos |
| 50 | 1.49 | Grease gun | item49 | 1 | Nos |
| 51 | 1.5 | Growler | item50 | 2 | Nos |
| 52 | 1.51 | Hacksaw frame (150mm) | item51 | 6 | Nos |
| 53 | 1.52 | Hacksaw frame (300 mm) | item52 | 10 | Nos |
| 54 | 1.53 | Hammer Extractor type | item53 | 12 | Nos |
| 55 | 1.54 | Hammer, ball peen with handle 0.5Kg | item54 | 8 | Nos |
| 56 | 1.55 | Hand drill Machine | item55 | 8 | Nos |
| 57 | 1.56 | Hand Vice (Length: 50 mm) | item56 | 4 | Nos |
| 58 | 1.57 | Hydrometer | item57 | 18 | Nos |
| 59 | 1.58 | Inside calliper Size: 150 mm | item58 | 10 | Nos |
| 60 | 1.59 | Kilowatt Meter Analog | item59 | 15 | Nos |
| 61 | 1.6 | Knife Switch DPDT fitted with fuse terminals | item60 | 18 | Nos |
| 62 | 1.61 | Knife Switch TPDT fitted with fuse terminals | item61 | 19 | Nos |
| 63 | 1.62 | Laboratory type Induction coil | item62 | 14 | Nos |
| 64 | 1.63 | Limit Switch | item63 | 10 | Nos |
| 65 | 1.64 | Load Bank Lamp/ heater type | item64 | 3 | Nos |
| 66 | 1.65 | Luxmeter | item65 | 19 | Nos |
| 67 | 1.66 | Magnetic Flux Meter | item66 | 12 | Nos |
| 68 | 1.67 | Mallet hard wood | item67 | 7 | Nos |
| 69 | 1.68 | MCCB | item68 | 11 | Nos |
| 70 | 1.69 | Megger | item69 | 9 | Nos |
| 71 | 1.7 | Milli Voltmeter centre zero analog, portable box type housed in Bakelite case | item70 | 12 | Nos |
| 72 | 1.71 | Miniature Breaker | item71 | 13 | Nos |
| 73 | 1.72 | Ohm Meter Series type Portable box type | item72 | 15 | Nos |
| 74 | 1.73 | Ohm Meter Shunt Type Portable box type | item73 | 14 | Nos |
| 75 | 1.74 | Oil can | item74 | 9 | Nos |
| 76 | 1.75 | Oil Testing Kit | item75 | 4 | Nos |
| 77 | 1.76 | Out Side Micrometer | item76 | 12 | Nos |
| 78 | 1.77 | Outside calliper | item77 | 10 | Nos |
| 79 | 1.78 | Phase Sequence Indicator | item78 | 22 | Nos |
| 80 | 1.79 | Pin Type, shackle type, egg type & suspension type insulators including hardware fitting | item79 | 20 | Nos |
| 81 | 1.8 | Pipe Vice Cast Iron with hardened jaw open type | item80 | 11 | Nos |
| 82 | 1.81 | Plane, cutters | item81 | 8 | Nos |
| 83 | 1.82 | Plier, long nose Insulated | item82 | 40 | Nos |
| 84 | 1.83 | Pliers Flat nose Insulated | item83 | 14 | Nos |
| 85 | 1.84 | Pliers Round nose Insulated | item84 | 14 | Nos |
| 86 | 1.85 | Portable Electric Drill Machine | item85 | 1 | Nos |
| 87 | 1.86 | Potential Transformer | item86 | 10 | Nos |
| 88 | 1.87 | Power factor Meter Digital | item87 | 20 | Nos |
| 89 | 1.88 | Pulley puller with 3 legs (150mm) | item88 | 1 | Nos |
| 90 | 1.89 | Pulley puller with 3 legs (300 mm) | item89 | 1 | Nos |
| 91 | 1.9 | RCC Pole with accessories (MS angle iron, ‘C’ clamp, stay insulator etc.) and materials | item90 | 11 | Nos |
| 92 | 1.91 | Relays - Cut out | item91 | 16 | Nos |
| 93 | 1.92 | Relays - Reverse current | item92 | 19 | Nos |
| 94 | 1.93 | Relays - Under voltage | item93 | 17 | Nos |
| 95 | 1.94 | Relays – Over current | item94 | 17 | Nos |
| 96 | 1.95 | Rheostat (Sliding Type) 0-25 Ohm, | item95 | 2 | Nos |
| 97 | 1.96 | Rheostat (Sliding Type) 0-300 Ohm | item96 | 2 | Nos |
| 98 | 1.97 | Rheostat (Sliding Type)0-10 Ohm, 5 A | item97 | 2 | Nos |
| 99 | 1.98 | Rheostat (Sliding Type)0-10hm, 10 A, | item98 | 2 | Nos |
| 100 | 1.99 | Rotary Switch | item99 | 14 | Nos |
| 101 | 2 | Rubber mat | item100 | 21 | Nos |
| 102 | 2.01 | Safety Belt | item101 | 22 | Nos |
| 103 | 2.02 | Single phase Transformer core type, air cooled | item102 | 14 | Nos |
| 104 | 2.03 | Single Phase Variable Auto Transformer | item103 | 12 | Nos |
| 105 | 2.04 | Smoothing cutters | item104 | 14 | Nos |
| 106 | 2.05 | Snip Straight and bent Heavy duty | item105 | 14 | Nos |
| 107 | 2.06 | Soft starter 1ph | item106 | 11 | Nos |
| 108 | 2.07 | Solar panel with Battery | item107 | 10 | Nos |
| 109 | 2.08 | Soldering Iron (25 W, 65 W and 120 W) Set Of 2 No | item108 | 8 | Nos |
| 110 | 2.09 | Spanner Adjustable drop forged ,SS 150 mm length | item109 | 5 | Nos |
| 111 | 2.1 | Spanner Adjustable drop forged, SS 300 mm length | item110 | 12 | Nos |
| 112 | 2.11 | Starters for 2 to 5 H.P. A.C Motors - Auto transformer type | item111 | 7 | Nos |
| 113 | 2.12 | Starters for 2 to 5 H.P. AC Motors - Direct on-line starter | item112 | 5 | Nos |
| 114 | 2.13 | Starters for 2 to 5 H.P. AC Motors - Star Delta starter - manual, | item113 | 7 | Nos |
| 115 | 2.14 | Starters for 2 to 5 H.P. AC Motors - Star Delta starter fully automatic | item114 | 8 | Nos |
| 116 | 2.15 | Starters for 2 to 5 H.P. AC Motors - Star Delta starter semi-automatic | item115 | 6 | Nos |
| 117 | 2.16 | Table vice | item116 | 19 | Nos |
| 118 | 2.17 | Tachometer (Analog type) | item117 | 5 | Nos |
| 119 | 2.18 | Tachometer (Sensor type Digital) | item118 | 7 | Nos |
| 120 | 2.19 | Temperature controlled Soldering Iron (50 Watts) | item119 | 14 | Nos |
| 121 | 2.2 | Thermometer Digital | item120 | 8 | Nos |
| 122 | 2.21 | Tong Tester/ Clamp Meter | item121 | 12 | Nos |
| 123 | 2.22 | Try square | item122 | 5 | Nos |
| 124 | 2.23 | Tweezers | item123 | 8 | Nos |
| 125 | 2.24 | Voltage Stabilizer | item124 | 3 | Nos |
| 126 | 2.25 | Wheatstone Bridge with Galvanometer and battery | item125 | 14 | Nos |
| 127 | 2.26 | Wire cutter and stripper | item126 | 33 | Nos |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender