Uttarakhand Workforce Development Project has published Supply N Installation Of Fitter Trade Tools N Equipments For The Upgradation Of Priority Itis Under Ukwd Project. Submission Date for this Tender is 01-03-2021. Kitchen Equipment Tenders in Uttarakhand Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Feb-2021 | Corrigendum No 1 | Technical Bid | 20-02-2021 |
2 | 18-Feb-2021 | Date Extension | Date | 01-03-2021 |
Name of Work:Supply of Fitter Trade Tools & Equipment for the up gradation of Priority ITIs under UKWD Project | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | TRADE NAME : FITTER | |||
2 | 1.01 | Adjustable pipe chain tonge to take pipes | item1 | 3 | Nos |
3 | 1.02 | Adjustable pipe die set BSP (SETS) | item2 | 11 | Nos |
4 | 1.03 | Adjustable spanner | item3 | 4 | Nos |
5 | 1.04 | Angle plate | item4 | 10 | Nos |
6 | 1.05 | Arm strong type tool bit holder, Left Hand 6mm | item5 | 11 | Nos |
7 | 1.06 | Arm strong type tool bit holder, Right Hand 10mm | item6 | 11 | Nos |
8 | 1.07 | Arm strong type tool bit holder, Right Hand 6mm | item7 | 13 | Nos |
9 | 1.08 | Aviation Snips straight Cut | item8 | 18 | Nos |
10 | 1.09 | Bearing different types (EACH) | item9 | 14 | Nos |
11 | 1.1 | Bearing extractor | item10 | 14 | Nos |
12 | 1.11 | Blow Lamp | item11 | 10 | Nos |
13 | 1.12 | C.I. Sluice / Gate valve (flanged type) | item12 | 32 | Nos |
14 | 1.13 | Caps screws (EACH) | item13 | 32 | Nos |
15 | 1.14 | Carbide Wear Block. (EACH) | item14 | 16 | Nos |
16 | 1.15 | Cast Iron Globe Valve (Flanged type) | item15 | 32 | Nos |
17 | 1.16 | Chipping hammer | item16 | 4 | Nos |
18 | 1.17 | Chisel cold cross cut & diamond point. (EACH) | item17 | 150 | Nos |
19 | 1.18 | Chisel cold flat | item18 | 182 | Nos |
20 | 1.19 | Chisel cold round noze. | item19 | 167 | Nos |
21 | 1.2 | Clamp "C", 100mm | item20 | 2 | Nos |
22 | 1.21 | Clamp "C", 200mm | item21 | 24 | Nos |
23 | 1.22 | Clamp toolmaker | item22 | 6 | Nos |
24 | 1.23 | Combination Set | item23 | 12 | Nos |
25 | 1.24 | Comparators Gauge - Dial Indication with Stand and Bracket. | item24 | 4 | Nos |
26 | 1.25 | Damaged old spur gear | item25 | 32 | Nos |
27 | 1.26 | Depth micrometer. 0-25 mm | item26 | 6 | Nos |
28 | 1.27 | Dial test indicator on stand | item27 | 2 | Nos |
29 | 1.28 | Dial vernier caliper. (Universal type) | item28 | 11 | Nos |
30 | 1.29 | Different Profile gauges (Plate type) - For demonstration | item29 | 64 | Nos |
31 | 1.3 | Digital Micrometer outside. | item30 | 11 | Nos |
32 | 1.31 | Digital Vernier caliper | item31 | 12 | Nos |
33 | 1.32 | Double Ended tubular Box spanner set with Tommy bar (SETS) | item32 | 4 | Nos |
34 | 1.33 | Dowel pin (straight) (EACH) | item33 | 16 | Nos |
35 | 1.34 | Drill chuck with key | item34 | 2 | Nos |
36 | 1.35 | Drill Drift | item35 | 28 | Nos |
37 | 1.36 | Drill gauges | item36 | 32 | Nos |
38 | 1.37 | Drill twist straight shank (SETS) | item37 | 24 | Nos |
39 | 1.38 | Drill twist Taper shank (SETS) | item38 | 21 | Nos |
40 | 1.39 | Earth clamps | item39 | 2 | Nos |
41 | 1.4 | Engineer's try square (knife-edge) | item40 | 5 | Nos |
42 | 1.41 | Feeler gauge (SETS) | item41 | 1 | Nos |
43 | 1.42 | File card | item42 | 161 | Nos |
44 | 1.43 | File feather edge smooth | item43 | 10 | Nos |
45 | 1.44 | File flat bastard, 200mm | item44 | 48 | Nos |
46 | 1.45 | File flat bastard, 300mm | item45 | 45 | Nos |
47 | 1.46 | File flat second cut safe edge | item46 | 246 | Nos |
48 | 1.47 | File half round bastard | item47 | 86 | Nos |
49 | 1.48 | File half round second cut | item48 | 50 | Nos |
50 | 1.49 | File hand second cut | item49 | 202 | Nos |
51 | 1.5 | File knife edge smooth | item50 | 18 | Nos |
52 | 1.51 | File round bastard | item51 | 116 | Nos |
53 | 1.52 | File round second cut | item52 | 151 | Nos |
54 | 1.53 | File square second cut | item53 | 207 | Nos |
55 | 1.54 | File Swiss type needle (SETS) | item54 | 3 | Nos |
56 | 1.55 | File triangular second cut | item55 | 174 | Nos |
57 | 1.56 | File triangular smooth | item56 | 267 | Nos |
58 | 1.57 | Fire buckets | item57 | 7 | Nos |
59 | 1.58 | Fire extinguisher (For 4 Units) | item58 | 1 | Nos |
60 | 1.59 | Flat headed hammers with handle | item59 | 20 | Nos |
61 | 1.6 | Gas lighter | item60 | 2 | Nos |
62 | 1.61 | Gauge plug (SETS) | item61 | 9 | Nos |
63 | 1.62 | Gauge snap Go and Not Go (SETS) | item62 | 9 | Nos |
64 | 1.63 | Gauge telescopic set | item63 | 5 | Nos |
65 | 1.64 | Glass magnifying | item64 | 7 | Nos |
66 | 1.65 | Gloves (Leather) (PAIRS) | item65 | 2 | Nos |
67 | 1.66 | Hand hammer with handle | item66 | 1 | Nos |
68 | 1.67 | Hand Reamer set (Tapar pin straight flute) (SETS) | item67 | 7 | Nos |
69 | 1.68 | Hollow punch (SETS) | item68 | 8 | Nos |
70 | 1.69 | Indexable boring bar with inserts | item69 | 64 | Nos |
71 | 1.7 | Interchangeable ratchet socket set (SETS) | item70 | 4 | Nos |
72 | 1.71 | Jigs & Fixture (sample) | item71 | 16 | Nos |
73 | 1.72 | Knurling tool (Diamond, straight & Diagonal) (EACH) | item72 | 12 | Nos |
74 | 1.73 | Lapping plate (EACH) | item73 | 32 | Nos |
75 | 1.74 | Lifting sling | item74 | 32 | Nos |
76 | 1.75 | Lugs for cable | item75 | 24 | Nos |
77 | 1.76 | Machine Reamer parallel (Helical flute) | item76 | 8 | Nos |
78 | 1.77 | Machine vice - Swivel Base, 100 mm | item77 | 12 | Nos |
79 | 1.78 | Machine vice - Swivel Base, 125 mm | item78 | 14 | Nos |
80 | 1.79 | Machine vice, 100 mm | item79 | 7 | Nos |
81 | 1.8 | Mallet | item80 | 7 | Nos |
82 | 1.81 | Medium carbon Heat treated alloy steel Metric Studs and bolts along with nuts (for display) of standard length (EACH) | item81 | 32 | Nos |
83 | 1.82 | Micrometer inside with extension rods. | item82 | 5 | Nos |
84 | 1.83 | Micrometer outside, 0-25mm | item83 | 3 | Nos |
85 | 1.84 | Micrometer outside, 25-50mm | item84 | 5 | Nos |
86 | 1.85 | Micrometer outside, 50-75mm | item85 | 6 | Nos |
87 | 1.86 | Oil Can | item86 | 2 | Nos |
88 | 1.87 | Packing gasket | item87 | 16 | Nos |
89 | 1.88 | Pipe cutter wheel type | item88 | 7 | Nos |
90 | 1.89 | Pipe threading die with handle | item89 | 29 | Nos |
91 | 1.9 | Pipe vice | item90 | 1 | Nos |
92 | 1.91 | Pipe wrench | item91 | 3 | Nos |
93 | 1.92 | Planishing hammer | item92 | 8 | Nos |
94 | 1.93 | Pliers combination insulated | item93 | 5 | Nos |
95 | 1.94 | Pocker | item94 | 5 | Nos |
96 | 1.95 | Power tools for fastening | item95 | 14 | Nos |
97 | 1.96 | Prick punch | item96 | 9 | Nos |
98 | 1.97 | Pulley extractor | item97 | 13 | Nos |
99 | 1.98 | Pulleys (for V-belt or Flat belt) | item98 | 16 | Nos |
100 | 1.99 | Punch letter set | item99 | 4 | Nos |
101 | 2 | Punch number set | item100 | 2 | Nos |
102 | 2.01 | Scraper flat | item101 | 175 | Nos |
103 | 2.02 | Scraper half round | item102 | 177 | Nos |
104 | 2.03 | Scraper triangular | item103 | 160 | Nos |
105 | 2.04 | Screw pitch gauge Metric | item104 | 2 | Nos |
106 | 2.05 | Screw thread micrometer with interchangeable. Pitch anvils for checking metric threads 60. | item105 | 6 | Nos |
107 | 2.06 | Sine bar | item106 | 5 | Nos |
108 | 2.07 | Sleeve drill Morse | item107 | 6 | Nos |
109 | 2.08 | Slip Gauge as Johnson metric set (SETS) | item108 | 11 | Nos |
110 | 2.09 | Slip-on Forged steel Flange | item109 | 64 | Nos |
111 | 2.1 | Snip bent Left Cut | item110 | 9 | Nos |
112 | 2.11 | Spanner- Double Ended (SETS) | item111 | 2 | Nos |
113 | 2.12 | Spindle key for cylinder valve | item112 | 2 | Nos |
114 | 2.13 | Spirit Level metal Type - 2 | item113 | 7 | Nos |
115 | 2.14 | Stake grooving | item114 | 10 | Nos |
116 | 2.15 | Stake hatchet with Leg | item115 | 11 | Nos |
117 | 2.16 | Standard Tap screws (EACH) | item116 | 16 | Nos |
118 | 2.17 | Steel Rule Graduated both in Metric and English Unit | item117 | 18 | Nos |
119 | 2.18 | Stillson wrenches | item118 | 5 | Nos |
120 | 2.19 | Stop cock | item119 | 32 | Nos |
121 | 2.2 | Straight edge steel | item120 | 4 | Nos |
122 | 2.21 | Stud Extractor EZY - out (SETS) | item121 | 9 | Nos |
123 | 2.22 | Surface plate C.I/Granite with Stand and Cover | item122 | 9 | Nos |
124 | 2.23 | Surface roughness comparison plates | item123 | 5 | Nos |
125 | 2.24 | Taps and dies complete set (SETS) | item124 | 18 | Nos |
126 | 2.25 | Taps and dies complete set in box | item125 | 2 | Nos |
127 | 2.26 | Temperature gauge (EACH) | item126 | 16 | Nos |
128 | 2.27 | Tip cleaner (SETS) | item127 | 5 | Nos |
129 | 2.28 | Torque wrench (Standard/Ratchet type) | item128 | 10 | Nos |
130 | 2.29 | Trammel | item129 | 3 | Nos |
131 | 2.3 | Trolley for gas cylinders | item130 | 2 | Nos |
132 | 2.31 | Universal scribing block | item131 | 7 | Nos |
133 | 2.32 | V-belt and Flat belt (EACH) | item132 | 16 | Nos |
134 | 2.33 | V-Block pair with clamps | item133 | 20 | Nos |
135 | 2.34 | Vernier Bevel protector, 360 deg (150 mm) | item134 | 4 | Nos |
136 | 2.35 | Vernier bevel protractor Blade with Acute Angle Attachment, 300 mm | item135 | 3 | Nos |
137 | 2.36 | Vernier caliper, 0-150 mm | item136 | 4 | Nos |
138 | 2.37 | Vernier caliper, 150 mm | item137 | 47 | Nos |
139 | 2.38 | Vernier height gauges | item138 | 3 | Nos |
140 | 2.39 | Vice bench | item139 | 168 | Nos |
141 | 2.4 | Washer, clutch, keys, jib, cotter & circlip (EACH) | item140 | 32 | Nos |
142 | 2.41 | Welder cable (1 PCS-20 METER) | item141 | 2 | Nos |
143 | 2.42 | Welding goggles (PAIRS) | item142 | 4 | Nos |
144 | 2.43 | Welding helmet with coloured flame retardent glass | item143 | 2 | Nos |
145 | 2.44 | Wheel dresser (One for 4 units) Star/Dresser with Holder | item144 | 5 | Nos |
146 | 2.45 | Wing compass | item145 | 6 | Nos |
147 | 2.46 | Wire gauge, metric standard | item146 | 1 | Nos |
148 | 2.47 | Wooden handle forged Soldering Iron copper bit. | item147 | 13 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail