Lac Ads 2020-21 Construction Of Entrance Gate To S M T H S S Chelakkara ( Re -Tender ) Lac Ads 2020-21 Construction Of Entrance Gate To S M T H S S Chelakkara
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Feb 2021
0 days left
EMD
10264
Bank guarantee accepted
Document Fee
910
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chelakkara → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Lac Ads 2020-21 Construction Of Entrance Gate To S M T H S S Chelakkara ( Re -Tender ) Lac Ads 2020-21 Construction Of Entrance Gate To S M T H S S Chelakkara
BOQ
| Work Name:LAC ADS 2020-21 Construction of Entrance gate to S M T H S S Chelakkara | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of Gate | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001114 | 1.3 | cum |
| 3 | 1.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001115 | 1 | cum |
| 4 | 1.03 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 2.34 | cum |
| 5 | 1.04 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001117 | 5.64 | sqm |
| 6 | 1.05 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001118 | 15.84 | sqm |
| 7 | 1.06 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001119 | 223.56 | kilogram |
| 8 | 1.07 | 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001120 | 1.44 | cum |
| 9 | 1.08 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001121 | 31.04 | sqm |
| 10 | 1.09 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001122 | 15.2 | sqm |
| 11 | 1.1 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001123 | 15.2 | sqm |
| 12 | 1.11 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001124 | 150 | kg |
| 13 | 1.12 | 12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001125 | 12.96 | sqm |
| 14 | 1.13 | od32542/2020_2021 : supplying and fixing stainless steel letter in malayalam and english of size 30cm or nearest avialable size using good quality material | BI01010001010000000000000515BI0100001126 | 46 | each |
| 15 | 1.14 | 10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | BI01010001010000000000000515BI0100001130 | 297 | kg |
| 16 | 1.15 | od32928/2020_2021 : "Supplying and fixing at site, Aluminium composite panel make of total 3mm thickness comprising of Aluminium skin of minimum .25 mm with KYNAR 500 based fluorocarbon paint finish + 3 mm LDPE based core material + .25 mm aluminium skin with service coat bound together with co extrusion process. The thickness shall be minimum 0.25 mm thickness and PVDF shall be add-on to this thickness. _ Surface of the Composite Panel should be finished with Kynar-500 based PVDF coating (PolyVinylidene DiFluoride) on the topside with minimum 30 microns thickness and a service coating on the reverse side The finished surface shall be protected with a self adhesive peel off foil with 80 microns thickness white or black, tested to with standbe fixed on pre-fabricated framework using aluminium sections, using hilti/camco anchor bolts (10 mm x 80mm ), non stainable /stainable weather sealant (BOSS,DOW CORNING, ADARSH,etc). The surface shall be to line and level. There shall be a protective film on the panel which shall be removed after completion of work. If the stain or any damage noticed after peel off by the fabricator, such panel should be replaced with new one of the same shade and colour, at no extra cost. Cost shall include all labour, lead, fabrication charges fixing charges, cost of all consumables etc.including scaffolding.\rUsing ALUDECOR OR VIRGO SLEEK acp sheet 3mm .25 thickness, 1mm thick 11/2 x1 1.00kgWGT aluminium sections for frame work & weather silicon fabrication and fixing all including " | BI01010001010000000000000515BI0100001147 | 20.7 | sqm |
| 17 | 1.16 | od51454/2020_2021 : Engaging coolie | BI01010001010000000000000515BI0100001116 | 4 | each |
AI Tender Summary
Tender Timeline
Jan 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender