Construction And Other Related Civil Works Of Collection Centre Jahangirabad Bsr
Tender Value
3.28 Lakhs
Estimated cost
Bid Submission
23 Feb 2021
0 days left
EMD
3000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jahangirabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Other Related Civil Works Of Collection Centre Jahangirabad Bsr
BOQ
| Name of Work:- Construction And Other Related Civil Works of Collection Center, Jahangirabad Town Distt Bulandshahr | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. CSI No. 4.01 | 5 | Cum. | |
| 2 | 2 | Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPCL area including its roylty and carriage, loading/ unloading, spreading , watering, ramming in 20 cm layers and dressing of earth etc. for proper completion of the work . (CSI No. 4.10) | 9 | Cum. | |
| 3 | 3 | Concrete with 4cm gauge approved stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in proportion of 12:6:1 in foundations & under floors including supply of all materials, labour and tools and plants etc. required for proper completion of work. CSI No. 5.02 | 5 | Cum. | |
| 4 | 4 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work.\nCSI No. 5.06 | 2 | Cum | |
| 5 | 5 | RCC work with cement approved coarse sand (F.M. 2.9 to 3.2) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc in proportion 1:1.5:3 in lintels or bends and sun shade of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire,including necessary centering and smooth shuttering, including cost of all other materials labour and T&P etc. required for proper completion of work . CSI No. 5.23 | 1 | Cum | |
| 6 | 6 | RCC work with cement approved coarse sand (F.M. 2.9 to 3.2) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc in proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including necessary centering and smooth shuttering, including cost of all other materials labour and T&P etc. required for proper completion of work . (CSI No. 5.24) | 3.7 | Cum | |
| 7 | 7 | First class brick (class-150) work in 1:6 cement and coarse sand (F.M.2.9 to 3.2) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. CSI No. 6.01 | 6 | Cum. | |
| 8 | 8 | First class brick (class-150) work in 1:6 cement and coarse sand (F.M.2.9 to 3.2) mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work, thickness of wall not to be less than 1 brick (230mm).. CSI No. 6.01+6.08 | 13 | Cum | |
| 9 | 9 | Mild steel or Iron work of small sizes and sections such as Holding down bolts, Holdfasts tie rods, gratings etc. (When not included in an overall rates) wrought to required shape, form including supply of steel bolts, nuts, wastage etc. and their fixing charges and welding, required for proper completion of the work including cost of steel (which shall be arranged by the contractor). (CSI No. 9.00) | 0.006 | M.T | |
| 10 | 10 | Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record racks , roof work , window / boundary grill or railing and T/F Rail etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials, lobour and T&P required for proper completion of work.CSI No. 9.01 | 0.43 | M.T | |
| 11 | 11 | TMT or Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured separately CSI No. 9.03 | 0.257 | M.T | |
| 12 | 12 | 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all material labour and T&P etc for proper completion of work. (CSI No. 11.06) | 24.75 | Sqm | |
| 13 | 13 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) | 53.06 | Sqm | |
| 14 | 14 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.CSI No. 11.09 | 43.52 | Sqm | |
| 15 | 15 | Add for extra labour and materials for plaster over rough face of one brick thick wall. CSI No. 11.12 | 48.29 | Sqm | |
| 16 | 16 | S/mixing approved water proofing compound / hardner (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. CSI No. 11.15 | 1 | litre | |
| 17 | 17 | Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. CSI No. 11.16 | 15.84 | RM | |
| 18 | 18 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) | 26.13 | Sqm | |
| 19 | 19 | Providing and fixing glass strips of 3.15 mm thickness & 35mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. completion required for proper completion of work. (CSI No. 12.14) | 34.5 | RM | |
| 20 | 20 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint \"Luxol\" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. CSI No. 13.01 | 9.93 | Sqm | |
| 21 | 21 | Same as in Item No. 20 above but for every coat after Ist coat. CSI No. 13.02 | 9.93 | Sqm | |
| 22 | 22 | One priming coat and one coat oil bound acrelic distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. CSI No. 13.08 | 77.81 | Sqm | |
| 23 | 23 | Same as in item 22 but for every coat after the first coat. CSI No. 13.09 | 77.81 | Sqm | |
| 24 | 24 | Finishing walls with water proof cement paint of approved make like \"Super Snowcem\" or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work. CSI 13.17 | 43.52 | Sqm | |
| 25 | 25 | Same as in item No. 24 but for each coat of water proof cement paint after the first two coats to give an even shade. CSI 13.18 | 43.52 | Sqm | |
| 26 | 26 | Same as in item No. 24 but for each coat of water proof cement paint. on previously treated surface. CSI 13.19 | 20 | Sqm | |
| 27 | 27 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. CSI No. 13.20. | 121.33 | Sqm | |
| 28 | 28 | 20.04b-Renewing panes of 4.8 t0 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 4 mm thick panes. CSI No 20.04 (b) | 4 | Sqm | |
| 29 | 29 | Wiring point for light with 1.5 sq. mm. FR PVC insulated multistrand single copper conductor cable in PVC conduit pipe concealed in the wall, 14 SWG copper PVC coated Earth continuity wire, and approved quality, piano type switch ceiling rose/angle/batten holder as per approved sample on 3mm thick phenolic laminated bakelite sheet etc. of matching shade with wall colour complete in all respect \nCSI No UPPWD 131(C) | 4 | Nos | |
| 30 | 30 | Wiring point for fan/fresh air fan (light duty exhaust fan) 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable PVC conduit pipe concealed in the wall, 14 SWG copper earth continuity wire and approved quality, piano type switch & ceiling rose as per approved sample on 3mm thick phenolic laminated backelite sheet etc. of matching shade with wall colour complete in all respects as per direction of E/I. \nCSI No UPPWD 133(C) | 1 | Nos | |
| 31 | 31 | Wiring point for plug with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall 14 SWG copper earth continuity wire and approved quality type switch and socket as per approved sample etc. of matching shade with wall colour complete in all repects as per direction of E/I. CSI No UPPWD 134(C) | 1 | Nos | |
| 32 | 32 | Supply and wiring of submain with two numbers 4 sq. mm FR PVC insulated 1100 V grade multistand single core copper conductor cable in 25 mm dia heavy duty (2 mm thick) PVC conduit concealed in wall complete with 1 number 2.5 Sq. mm FR PVC insulated multistand copper conductor cable as earth continuity wire etc. complete in all respects. CSI No UPPWD 216 (C) | 15 | RM | |
| 33 | 33 | S/F 6 Amp. to 32 Amp. “C” series MCB 9 KA/10 KA (Havells/MDS make) CSI No UPPWD 1002(C) | 3 | Nos | |
| 34 | 34 | S/F 63 amp. S.P. Isolator of approved make and as per sample approved by E/I. CSI No UPPWD 1004 (B) | 1 | Nos | |
| 35 | 35 | S/F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect as per direction of E/I. \nCSI No UPPWD 1022 (A) | 1 | Nos | |
| 36 | 36 | Supply and fixing of power plug with 15A/240V V flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mmx 100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. CSI No UPPWD 1139 | 2 | Nos | |
| 37 | 37 | S/F hexagonal fan box with hexagonal side of approved make 80 mm in length, fabricated from 18 S.W.G. M.S. sheet incorporating 12 mm dia. M.S. round Bars dully bent for supporting the fan hanger duly painted and screwing arrangement etc. complete. CSI No UPPWD 1149 | 1 | Nos | |
| 38 | 38 | Supply and fixing Stainless.Steel. mosquito proof heavy quality iron wire mesh of 16X24 SWG over windows but excluding cost of beading, including all materials, labour and T&P etc. required for proper completion of the work. CSI No. 26.07 | 4.2 | Sqm | |
| 39 | 39 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc L-Drop 12mm dia 8\"long.CSI No. 26.08© | 2 | Each | |
| 40 | 40 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc Tower bolt 8\"long.CSI No. 26.08(e) | 1 | Each | |
| 41 | 41 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc Handle 6\"long.CSI No. 26.08(g) | 2 | Each | |
| 42 | 42 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc M.S.Hinges 3\"long.CSI No. 26.08(j) | 3 | Each | |
| 43 | 43 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc Stopper with rubber pad. \nCSI No. 26.08(k) | 3 | Each | |
| 44 | 44 | Supply and fixing 30mmthick single leaf, hot pressed, phenol Formaldehyde resin bonded, boiling water resistant, commercial quality \"Sitapur ply wood\" or other ISI Marked Factory made flush door shutters conforming to IS: 2202 Part-1 ( 1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs and/or other fittings approved by Engineer-in-charge but excluding their ( fittings) supply but including painting two coats of black Japan on iron fittings if necessary.\nCSI NO. 26.24(a) | 2.1 | Sqm | |
| 45 | 45 | Supply & Fixing high tensile steel colour coated Anti rust, high temp resistant sheet with tensile strength 550 PMA hot dip metallic (Zinc Aluminum) alloy (Nn-55%) Al, (45%) coating 70 GSM with total thickness not less than 0.45 mm (TCT) durashine or equivalent make necessary over laps incl. S/F galvanized J/V hook with bolts, nuts, washer and bitumen washers etc. including cost of material, labour T&P etc. required for proper completion of work as per direction of E/I confirming I.S. 1397 : 1993 CSI NO. 26.50 | 24 | Sqm | |
| 46 | 46 | P/F openable steel glazed windows and ventilators of standard rolled Z section conforming to I.S. 7452 1974 and welded with (100 x 20 x 5) mm holdfast embedded in C.C. block (23 x 11.5 x 7.5) cm. size of 1:2:4 proportion of cement, coarse sand, and 20mm graded stone ballast as per drawing etc. complete but excluding S/F of glass panes of 4mm thick with nuts glazing clips with special putty of approved make etc. The fabrication should conform to I.S. 1038 1975. including cost of all materials, labours & T.&P etc. complete for proper completion of the work. NSI | 3.12 | Sqm | |
| 47 | 47 | Same as in Item No. 46 above but for fixed portion NSI | 1.08 | Sqm | |
| 48 | 48 | Supply and fixing 1200mm sweep ceiling fan(G.E.C./polar/crompton/usha or equavalent approved make)with double ball bearing,step type electronic regulator and 900mm long hanging rod with double canopy including testing and commissioning as per direction of Engineer-in-charge NSI | 1 | Nos |
AI Tender Summary
Tender Timeline
Jan 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 23, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender