Construction Of Community Toilet With Hand Bore Tw At Daldali Hat And Khoardanga Hat Construction Of Community Toilet With Hand Bore Tw At Daldali Hat And Khoardanga Hat Under Alipurduar Zilla Parishad ( 2 No )
Tender Value
7.52 Lakhs
Estimated cost
Bid Submission
05 Feb 2021
0 days left
EMD
15057
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KUMARGRAM → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Toilet With Hand Bore Tw At Daldali Hat And Khoardanga Hat Construction Of Community Toilet With Hand Bore Tw At Daldali Hat And Khoardanga Hat Under Alipurduar Zilla Parishad ( 2 No )
BOQ
| Name of Work: Construction of Community Toillet with hand bore T.W,Daldali hat and Khoardanga hat under Alipurduar Zilla parishad (2 nos) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a). Depth of excavation not exceeding 1500 mm. | BI01010001010000000000000515BI0100001115 | 18 | cum |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete .(payment to be made on the basis of measurement of finished quantity of work)a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001116 | 18.18 | cum |
| 3 | 3 | Cement concrete with 30 mm. down graded shingles excluding shuttering in ground floor in ground floor.1:3:6 proportion | BI01010001010000000000000515BI0100001117 | 5.14 | sqm |
| 4 | 4 | Ordinary cement concrete M-20 (mix 1:1.50:3) with graded stone chips (20mm down) excluding shuttring and reinforcement, if any, in ground floor as per IS-456-2000.i). With River bazree | BI01010001010000000000000515BI0100001118 | 5.6 | cum |
| 5 | 5 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.For works in foundation, basement and upto roof of ground floor/upto 4m. ( Details to be in bill) L.S. (JSW/JSPL/SHYAM/ SRMB/\nBMASL/ ELECROSTEEL/SSL) | BI01010001010000000000000515BI0100001119 | 0.44 | MT |
| 6 | 6 | Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor)25 mm. to 30 mm. thick wooden shuttering as per ( Details to be in bill) L.S. | BI01010001010000000000000515BI0100001120 | 50.4 | sqm |
| 7 | 7 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and\nlugs in ground floor.Grill weight @ 8 Kg / M2=69.3 Kg | BI01010001010000000000000515BI0100001121 | 1.32 | qntl |
| 8 | 8 | Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) ofsize 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut atjunction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be providedasgapinsert. Thedoorframetobefixed withwall byusing 8mmdia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001122 | 16.5 | m |
| 9 | 9 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails,\nM.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm\nwidth out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree\non the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either\nside of the panel with 10 mm (5 mmx2) th.,20\nmm wide cross PVC sheet as gap insert for\ntop rail and bottom rail. Paneling of 5 mm th.\nboth side PVC sheet to be fitted in the M.S.\nframe welded/sealed to the styles &rails with\n7 mm (5 mm+2 mm) th.x15 mm wide PVC\nsheet beading on inner side and joined\ntogether with solvent cement adhesive. | BI01010001010000000000000515BI0100001123 | 9 | sqm |
| 10 | 10 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item NO 60, polymer based paint as per item 59 (a) of Section (C) | BI01010001010000000000000515BI0100001124 | 9.2 | sqm |
| 11 | 11 | Brick work with 1st class bricks in cement mortar (6:1)a). In foundation and plinth | BI01010001010000000000000515BI0100001125 | 16.2 | cum |
| 12 | 12 | Brick work with 1st class bricks in cement mortar (6:1)b). In super structure of Ground floor | BI01010001010000000000000515BI0100001126 | 13.2 | cum |
| 13 | 13 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. | BI01010001010000000000000515BI0100001127 | 30.48 | sqm |
| 14 | 14 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).a). 20 mm thick plaster with 6:1 cement mortar | BI01010001010000000000000515BI0100001128 | 71.88 | sqm |
| 15 | 14.01 | b). 15 mm thick plaster with 4:1 cement mortar | BI01010001010000000000000515BI0100001129 | 104.58 | sqm |
| 16 | 14.02 | c). 10 mm thick plaster with 4:1 cement morter | BI01010001010000000000000515BI0100001130 | 51.64 | sqm |
| 17 | 15 | Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel/oil bound prinmer of approved quality including smoothening surfaces by sand papering etc. a). On steel surface | BI01010001010000000000000515BI0100001131 | 10.2 | sqm |
| 18 | 16 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.On steel surface withany shade except white. Two coats. | BI01010001010000000000000515BI0100001132 | 10.2 | sqm |
| 19 | 17 | Iron butthinges ofapproved quality fitted and fixed with steel screws, with ISI mark.(iii) 75mm. X 40mm. X 1.12mm. | BI01010001010000000000000515BI0100001133 | 28 | no |
| 20 | 18 | Iron secket bolt of approved quality fitted and fixed complete.100 mm long x 10 mm dia bolt For door | BI01010001010000000000000515BI0100001134 | 12 | no |
| 21 | 19 | Anodised aluminium D- type Handle ………do …….do. 75x45x25 mm size | BI01010001010000000000000515BI0100001135 | 12 | nos |
| 22 | 20 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. | BI01010001010000000000000515BI0100001136 | 23.22 | sqm |
| 23 | 21 | Apply Decorative cement based paint approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. ii) Two coats | BI01010001010000000000000515BI0100001137 | 180 | sqm |
| 24 | 22 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 &IS 1285-1975, annodised conforming to IS 18681983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white\n | BI01010001010000000000000515BI0100001138 | 12 | kg |
| 25 | 23 | Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto 6 m height for external wall) (a) 1.2 mm thick (1.85 Kg/Sq.m) | BI01010001010000000000000515BI0100001139 | 2.52 | sqm |
| 26 | 24 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m .a) Area of each tile upto 0.09 Sq.m | BI01010001010000000000000515BI0100001140 | 34.58 | sqm |
| 27 | 25 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative | BI01010001010000000000000515BI0100001141 | 18.88 | sqm |
| 28 | 26 | SNITARY & PLUMBING WORK Supplying, fitting and fixing white vitreous china best quality approved\nmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,\nC.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar\ncock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved\nquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved\nquality P.V.C. connection pipe with heavy brass C.P. nut including\nmending good all damages and painting the brackets with two coats ofapproved paint.\n(i) 450 mm X 300 mm size | BI01010001010000000000000515BI0100001142 | 4 | each |
| 29 | 27 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white\nflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.\n(i) 300 mm long | BI01010001010000000000000515BI0100001143 | 2 | each |
| 30 | 28 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001144 | 10 | each |
| 31 | 29 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red\nas per I.S. 3438 / 1965 together with brass C.P. hinges.\n(i) 450 mm X 300 mm | BI01010001010000000000000515BI0100001145 | 4 | each |
| 32 | 30 | Supplying, fitting and fixing porcelain soap tray of approved make.\n(i) Recessed soap tray of size 150 mm X 150 mm | BI01010001010000000000000515BI0100001146 | 4 | each |
| 33 | 31 | Supplying, fitting and fixing towel rail with two brackets.(i) 25 mm dia. and 450 mm long | BI01010001010000000000000515BI0100001147 | 6 | each |
| 34 | 32 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white\nvitreous chinaware of approved make in position with brass screws on 75\nmm X 75 mm X 75 mm wooden blocks complete.\n(i) 635 mm X 395 mm X 420 mm | BI01010001010000000000000515BI0100001148 | 2 | each |
| 35 | 33 | Supplying, fitting and fixing Squating plate with integral flushing in white\nvitreous chinaware of approved make in cement concrete (6:3:1) with\njhama chips complete. (Payment of concrete will be paid seperately).\n(i) 450 mm X 350 mm | BI01010001010000000000000515BI0100001149 | 2 | each |
| 36 | 34 | Supplying, fitting and fixing Orissa pattern water closet in white glazed\nvitreous chinaware of approved make in position complete excluding 'P'\nor 'S' trap (excluding cost of concrete for fixing).\n(ii) 530 mm X 410 mm | BI01010001010000000000000515BI0100001150 | 4 | each |
| 37 | 35 | Supplying P.V.C. water storage tank of approved quality with closed top\nwith lid (Black) - Multilayer\n(a) 500 litre capacity | BI01010001010000000000000515BI0100001151 | 2 | each |
| 38 | 36 | Supplying, fitting and fixing gunmetal wheel valve of approved brand\nand make tested to 21 kg per sq. cm. (for water lines only).\n(v) 40 mm dia each 2014.00 | BI01010001010000000000000515BI0100001152 | 2 | each |
| 39 | 37 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length(a) 75 mm | BI01010001010000000000000515BI0100001153 | 6 | m |
| 40 | 37.01 | (b) 110 mm | BI01010001010000000000000515BI0100001154 | 12 | m |
| 41 | 37.02 | (B) Fittings(ii) Plain Tee(b) 110 mm | BI01010001010000000000000515BI0100001155 | 6 | each |
| 42 | 37.03 | vi) Door Y (LH) & (RH)(b) 110 mm | BI01010001010000000000000515BI0100001156 | 2 | each |
| 43 | 37.04 | x) Bend 87.5º(b) 110 mm | BI01010001010000000000000515BI0100001157 | 4 | each |
| 44 | 37.05 | xv) Vent Cowl(a) 75 mm | BI01010001010000000000000515BI0100001158 | 2 | each |
| 45 | 38 | Labour for fitting UPVC pipes (B Type) & fittings conforming to IS-13592-1992…………(A) Above ground (i) 75 mm dia | BI01010001010000000000000515BI0100001159 | 6 | m |
| 46 | 38.01 | (ii) 110 mm dia | BI01010001010000000000000515BI0100001160 | 12 | m |
| 47 | 39 | Construction of septic tank of different capacities as per approved\ndrawing with 1st class brick work in cement mortar (1:4) including two\n560 mm dia. R.C.C. manhole cover(heavy type)of approved make\nsupplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab\nwith necessary fittings, 20mm thick cement plaster (4 : 1) with neat\ncement finish to the internal surfaces and 15 mm thick cement plaster (4\n: 1) to outside wall upto 200 mm below G.L floor finished with 25 mm\nthick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab\n proofing compound @ 0.5% by\nweight of cement with all costs of labour and materials.\n(i) For 10 users\nB) With Bazree(N.B Varity) | BI01010001010000000000000515BI0100001161 | 2 | each |
| 48 | 40 | Construction of circular soak well 2.5 metre deep in all types of sandy\nsoils with dry brick work upto 1.6 metre from the bottom having 150 mm\nintermediate cement brick work (1:4) band all round and cement brick\nwork (1:4) upto 0.90 metre from top with 20mm thick cement plastering\n(1:4) to inside face upto the depth of cement brick work, 15mm thick\ncement plaster (1:4) on outer face from top of the well upto G.L. and 6\nmm thick cement plaster (1:4) on top of the R.C.C. cover slab including\nfilling bottom 1.00 metre of inside of the well with brick metal (50 mm to\n63 mm size) including R.C.C. cover slab of 100 mm thick with cement\nconc (1:1.5:3) with stone chips with necessary reinforcement and\nshuttering including one 560 mm dia. R.C.C. manhole cover (heavy\ntype)of approved make supplied, fitted and fixed in the cover slab with\nnecessary fittings, making nacessary arrangements for pipe connections,\nexcavation of well including shoring, dewatering and removing the\nexess earth from the premises as per direction complete in all respect\nwith all costs of labour and materials.\nWith 250 mm thick dry brick work and 250 mm thick cement brick work\n(1:6) and 1.00m inside dia. | BI01010001010000000000000515BI0100001162 | 2 | each |
| 49 | 41 | Supplying, fitting and fixing PVC pipes of approved make of (medium\nduty) conforming to ASTMD - 1785 and threaded to match with GI Pipes\nas per IS : 1239 (Part - I). with all necessary accessories, specials viz.\nsocket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket,\nreducing tee, short piece etc. fitted with holder bats clamps, including\ncutting pipes, making threads,fitting, fixing etc. complete in all respect\nincluding cost of all necessary fittings as required,jointing materials and\ntwo coats of painting with approved paint in any position above ground.\n(Payment will be made on the centre line measurements of total pipe line\nincluding all specials. No separate payment will be made for accesories,\nspecials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes(Dia)15 mm | BI01010001010000000000000515BI0100001163 | 14 | m |
| 50 | 41.01 | (ii) 20 mm dia | BI01010001010000000000000515BI0100001164 | 20 | m |
| 51 | 41.02 | (ii) 25 mm dia | BI01010001010000000000000515BI0100001165 | 10 | m |
| 52 | 41.03 | (ii) 40 mm dia | BI01010001010000000000000515BI0100001166 | 10 | m |
| 53 | 42 | Cost of 0.5 HP Centrifugal pump with motor suppling and fitting all complete with electrification works. | BI01010001010000000000000515BI0100001167 | 2 | no |
| 54 | 43 | HAND BORE TUBE WELL Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre.(i) 40 mm dia. boring etc. | BI01010001010000000000000515BI0100001168 | 180 | M |
| 55 | 44 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (i) 40 mm dia. | BI01010001010000000000000515BI0100001169 | 7.2 | M |
| 56 | 45 | Supplying, fitting and fixing popular Maya pump no-6 or similar. (i) For 40 mm dia. tube well \n | BI01010001010000000000000515BI0100001170 | 2 | no |
| 57 | 46 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia)40 mm | BI01010001010000000000000515BI0100001171 | 172 | M |
| 58 | 47 | Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)\n(v) 40 mm dia. medium quality | BI01010001010000000000000515BI0100001172 | 3.6 | M |
| 59 | 48 | Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm.(v) 40 mm | BI01010001010000000000000515BI0100001173 | 2 | no |
| 60 | 49 | Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm.(v) 25 mm | BI01010001010000000000000515BI0100001174 | 2 | no |
| 61 | 50 | Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.(i) 40 mm | BI01010001010000000000000515BI0100001175 | 2 | no |
| 62 | 51 | Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete. | BI01010001010000000000000515BI0100001176 | 0.4 | cum |
| 63 | 52 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree \n | BI01010001010000000000000515BI0100001177 | 0.66 | cum |
| 64 | 53 | Construction of circular soak well 2.5 metre deep in all types of sandy\nsoils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick\nwork (1:4) upto 0.90 metre from top with 20mm thick cement plastering\n(1:4) to inside face upto the depth of cement brick work, 15mm thick\ncement plaster (1:4) on outer face from top of the well upto G.L. and 6\nmm thick cement plaster (1:4) on top of the R.C.C. cover slab including\nfilling bottom 1.00 metre of inside of the well with brick metal (50 mm to\n63 mm size) including R.C.C. cover slab of 100 mm thick with cement\nconc (1:1.5:3) with stone chips with necessary reinforcement and\nshuttering including one 560 mm dia. R.C.C. manhole cover (heavy\ntype)of approved make supplied, fitted and fixed in the cover slab with\nnecessary fittings, making nacessary arrangements for pipe connections,\nexcavation of well including shoring, dewatering and removing the\nexess earth from the premises as per direction complete in all respect\nwith all costs of labour and materials.\nWith 250 mm thick dry brick work and 250 mm thick cement brick work\n(1:6) and 1.00m inside dia. | BI01010001010000000000000515BI0100001178 | 2 | No |
| 65 | 54 | Add GST@12% | BI01010001010000000000000515BI0100001179 | 1 | |
| 66 | 55 | Add CESS@1% | BI01010001010000000000000515BI0100001180 | 1 |
AI Tender Summary
Tender Timeline
Jan 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender