Tnsudp-Package-1 Providing Bt Road And Strom Water Drain With Culvert Providing Bt Road And Strom Water Drain With Culvert At Nadukkadu Road Fromthondikkaradu Main Road To Sakthivel Nagar Road , Gayathri Garden Road ( Nesavalar Colony Municipal School O
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Feb 2021
0 days left
EMD
2.39 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TIRUCHENGODE MUNICIPALITY → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tnsudp-Package-1 Providing Bt Road And Strom Water Drain With Culvert Providing Bt Road And Strom Water Drain With Culvert At Nadukkadu Road Fromthondikkaradu Main Road To Sakthivel Nagar Road , Gayathri Garden Road ( Nesavalar Colony Municipal School Opp ) , Sengodampalayam Therkuthottam Road , Bankers Colony Road , Brintha
BOQ
| Name of work : TNSUDP 2021-21 : PACKAGE -1 : Providing BT Road and Strom water drain with Culvert at Nadukkadu Road Fromthondikkaradu main road to Sakthivel Nagar Road,Gayathri Garden Road ( Nesavalar Colony Municipal School Opp ),Sengodampalayam Therkuthottam road,Bankers Colony Road ,Brinthavan nagar 1st Cross,Kootappalli L type and E type municipal School Surrounding, & Nesavalar Colony 5thCross . In ward No:1& 8,2,14,11,13,5 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Picking 5cm to 10cm old metalled surface and sectioning the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply Pipes. The Rate inclusive of all charges etc, complete as per MORTH specifications. | 15575 | m² | |
| 2 | 2 | Collection, supply and filling with well gravel from approved quarry including cost, conveyance of all to site, stacking them on roadside to departmental gauge for premeasurement as directed by the departmental officer etc., complete as per MORTH specifications. | 984 | m³ | |
| 3 | 3 | Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. | 2337 | m³ | |
| 4 | 4 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications | 15575 | m² | |
| 5 | 5 | Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications | 15575 | m² | |
| 6 | 6 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 | 779 | m3 | |
| 7 | 7 | Providing and laying Bituminous concrete to30/ 40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 46.28 kgs of 60/70 bitumen & 4.02 Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications. | 468 | m3 | |
| 8 | 8 | Manufacturing,Supply and fixing Retro Refletive name sign board single arrow road of size 1.60m x 0.90m made out of wide angle cube corner micro presmatic grade sheeting conforming to IRC-67:2010 & type XI standards of STM D 4956-09 specification and fixed over 2mm thick Aluminium sheet & back support frame of 25mm x 25mm x 3mm MS angle frame supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm x 30 cm x 45 cm etc.,complete.The information message shall be made out of cut letters in Blue colour transperent overly film asper IRC 67-2010 guidelines 7 years warranty of retro reflctive sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor.( Special Specification) | 7 | No | |
| 9 | 9 | Providing and fixing of Retro Reflected Cautionary, Mandatory Signs made out of Wide Angle Cube Corner Micro prismatic grade conforming to IRC-67: 2010 & Type XI standards of reflective sheeting as per clause 6.9 of IRC 67: 2010 and fixed over 2mm thick Aluminium sheet fixed on back suppoting on Vertical Post of 65 NB GI Pipe, Medium Thick firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm as per approved drawing as directed by departmental officer.( Special Specification) | 7 | No | |
| 10 | 10 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 grams per area, thickness of 2.5mm exculisive of surface applied glass beads as per IRC : 35 The finished surface to be level, uniform and free from streaks and holes.( Special Specification) | 656 | m² | |
| 11 | 11 | Earth work excavation for foundation in all kinds of soils and subsoils to full depth as may be directed except hard rock requiring blastering inclusive of shoring strutting and bailing out water wherever necessary and refilling the sides of foundation which excavated earth in layer of 15cm thick well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with intial lead of 10 metres and initial lift of 2 metres etc., complete.23 & 24\nV, VI \nS2 | 891 | m³ | |
| 12 | 12 | Cement concrete 1:4:8 mix ( One cement four sand and eight aggregate) using 40mm ISSmetal including mixing, laying, consolidating curing cost and conveyance of all materials to site and all labour charges etc., complete as per MORTH specifications. | 131 | m³ | |
| 13 | 13 | Supplying, erecting mild steel with shuttering using MS sheets stiffened with MS angles, laid over country wood joists and side supported with casurina props for plain cement concrete wall works as directed by the departmental officer etc., complete.30(S) 86 86 A V, VI (S3) VII as per MORTH specifications. | 2852 | m² | |
| 14 | 14 | Cement concrete 1:2:4(One cement and two sand and four aggregate) using 20mm machine chips including cost of centering (for sides and supports), Expansion joint using bitumen pad and other materials and labour charges etc., complete as per std. specification.30 V, VI (S5) VII & 13 as per MORTH specifications. | 464 | m³ | |
| 15 | 15 | Plastering with cement mortar 1:4 mix (One cement and four sand ) 20 mm thick including cost, conveyance of all to site and curing charges etc., complete complying with standard specification. as per MORTH specifications. (S.I.309) | 633 | m² | |
| 16 | 16 | Supplying, erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or suitable size of BG 10 stiffened with welded MS angles of size 25mmx25mmx3mm of boarding, laid over silver oak joists of size 10cmx6.5cm spaced at 90cm c/c and supported by casurina props of 10cm to 13cm dia. Spaced at 75cm c/c complying with standard specification.30(S) 86 86 A V, VI (S3) VII as per MORTH specifications. (S.I.309) | 64 | m² | |
| 17 | 17 | Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) as per MORTH specifications. | 21 | m3 | |
| 18 | 18 | Supplying, fabricating and placing in position of steel rods including cost, conveyance, bending rods and tying grills with binding wire etc., complete.SS 86 & 86 A V, VI (S3) (S6) VII as per MORTH specifications. | 2100 | Kg |
AI Tender Summary
Tender Timeline
Jan 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender