Chaudhary Charan Singh Haryana Agricultural University-CCSHAU has published Special Repair/Renovation Of Committee Room In The Premises Of Directorate , Human Resource Management Building At Ccs Hau , Hisar . ( Including Electrical Work ) . Submission Date for this Tender is 10-02-2021. Electrical Maintenance Tenders in CCS HAU HISAR Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Feb-2021 | Fees for society | Fee | 10-02-2021 |
| Name of Work: Special repair/renovation of Committee room in the premises of Directorate, Human Resource Management building at CCS HAU, Hisar. (including electrical work) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil work 1 to 7:-\nProviding and fixing Luxalon metal false ceiling at all height consisting of suspenders of M.S flat of size 40 mm x 3 mm or 8 mm dia steel rod @ 4'-0" C/C, main frame/runner at border of size 25 mm x 50 mm and cross runners of size 25 mm x 50 mm @ 4'-0" C/C, top layer of 0.5 mm thick aluminium powder coated panel/sheet of required width of approved make, shade and colour including cost of cutting, fastner, PVC gutties, nails, screws, opening for light, exhauster etc. complete in all respect as per architectural drawing and design or as directed by Engineer In-Charge. (NS)\nNote:- Sample of Luxalon false ceiling can be seen with Executive Engineer (M) as retained in Committee Room of Vice-Chancellor Secretariat/VIP room of Indira Gandhi Auditorium. | 105.54 | Square Meter | |
| 2 | 2 | Removing of existing false ceiling tiles with frame work at all height (to be removed carefully), complete in all respect as directed by the Engineer-in-Charge. (NS) | 105.54 | Square Meter | |
| 3 | 3 | Providing and fixing 2 mm thick vinyle plank in flooring/skirting in wooden texture with adhesive of LG/Alstone make of approved colour and shade on existing concrete/terrazo flooring including cleaning and leveling the existing surface etc. complete in all respect as directed by Engineer In-charge. (NS) | 112 | Square Meter | |
| 4 | 4 | Providing and fixing 45 mm wide solid & 30 mm wide jali Zebra type horizontal Venetian blinds of required size and shape, fixed in position including rawal plugs and screws etc., complete in all respects. (NS)\n | 30.66 | Square Meter | |
| 5 | 5 | Analysis of rate for providing and fixing wall paneling (on wall) consisting of following:-\nFrame work:- \n Consisting of factory manufactured G.I. channel of size 43 mm x 15 mm x 0.8 mm fixed horizontally @ 2’-0” C/C with rawl plugs/ screws on wall. (NS)\n(a) 9 mm thick BWR grade-II plywood (ISI mark) of approved make fixed on G.I. channel frame.\n(b) Top portion:- Consisting of 0’-6” wide strips of 25 mm thick teak wood fixed on plywood.\n(c) Beading:- Beading of size 0’-2¼” x 0’-1¾” of teak wood at top.\nIncluding cost of melamine polish on teak wood strips and beading, rawl plugs, nails, screws etc., complete in all respects as per architectural drawing and design or as directed by Engineer In-charge.(NS)\n\n | 109 | Square Meter | |
| 6 | 6 | Providing and fixing 6 mm thick veneer on both side of existing flush door shutter including cost of fevicol, cutting, nails etc. omplete in all respects as directed by Engineer In-charge. (NS) | 8.92 | Square Meter | |
| 7 | 7 | Providing and fixing 12mm thick toughened glass of Saint Gobion make as fixed panels at all height, for glazing, fixed in position, complete in all respects as per architectural drawing and design, including cost of accessories like L-connector etc. (NS)\n\n | 3.25 | Square meter | |
| 8 | 8 | Electrical work 8 to 46:-\nWires & cables\n(i) Supply and erection of PVC copper insulated and sheathed 2 core circular flexible wire.\n(e) size 2.5 sqmm (80/0.20 mm) (HSR 31.9)\n | 100 | Meter | |
| 9 | 9 | Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections {HSR 31.17 (a) (ii)}\n(a) Miniature Circuit Breakers of 9 K.A. breaking capacity.\n(ii) 6 amp. To 32 amp(SP)\n | 50 | Each | |
| 10 | 10 | Pipe laying \nSupply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required\n(xxiii) Heavy gauge welded conduit pipe 3 2 mm dia 1.60 mm thickness flushed. {HSR 31.21(xxiii)}\n | 50 | Meter | |
| 11 | 11 | Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. {HSR 31.40(a)}\na) Cable size 1.5 sqmm(3/0.81 mm) | 500 | Meter | |
| 12 | 12 | b) Cable size 2.5 sqmm(3/1.05 mm) {HSR 31.40(b)} | 300 | Meter | |
| 13 | 13 | c) Cable size 4 sqmm (7/0.85) {HSR 31.40 (c )} | 300 | Meter | |
| 14 | 14 | Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall ceiling etc. including cost of PVC bends, inspection box and all other material required to complete in all respects. {HSR 31.44 (b)}\n b) 25 mm dia | 350 | Meter | |
| 15 | 15 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect.\n a)10 amp 1 way switch {HSR 31.56 (a)} | 23 | Each | |
| 16 | 16 | c) 20 amp switch {HSR 31.56 (c)} | 18 | Each | |
| 17 | 17 | d) 10 amp socket {HSR 31.56 (d)} | 7 | Each | |
| 18 | 18 | e) 16 amp socket {HSR 31.56 (e)} | 18 | Each | |
| 19 | 19 | Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects {HSR 31.57 (a)}\na) 2 Modules | 5 | Each | |
| 20 | 20 | d) 6 Modules {HSR 31.57 (d)} | 9 | Each | |
| 21 | 21 | f) 12Modules {HSR 31.57 (f)} | 3 | Each | |
| 22 | 22 | Supply installation testing and commissioning of wall/ free floor mounting dust and vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing . The panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch war. {HSR 31.63} | 3 | Square meter | |
| 23 | 23 | Supplying and fixing of cooper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect .{HSR 31.64} | 5 | Kg | |
| 24 | 24 | Pdg. and fixing digital metering equipment for LT cubical panel consisting of 96 mm x96 mm 0-500 V.volt meter with selector switch. Amp meter (of required ratio upto 600/5 amp) with selector switch and required C.Ts3 Nos…. a set of 3 Nos. phase indication lamps RYBLED. (HSR 31.65) | 2 | Each | |
| 25 | 25 | Supply & fixing of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. {HSR 31.66 (a)}\na) Rotary handle upto 125A. MCCB | 2 | Each | |
| 26 | 26 | Supply and erection of module case circuit breaker single pole/4 pole on wall on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. {HSR 31.69 (v)}\nv) 4 pole MCCB 100 amp | 2 | Each | |
| 27 | 27 | S/I/T/C of 2.0 Ton Cassette Specification modal name indoor unit 4 way casstte \nPower supply in outoor unit 1 face 50h 220-240v\nCooling capacity rated kw 5.5.\nRated power consumption rated kw 1.5 ISEER rated 5.05\nAir flow m3/s indoor unit 0.29/0.24/0.22\nOutdoor unit 0.64\nCfm indoor unit 618/512/459\nSound presser (db(a) indoor unit 32/29/28\nOutdoor 52\nPipe length (m) outdoor unit 32 m \nCharge less 15\nMinimum pipe length 2\nMaximum pipe length 25 maximum pipe height 10\nOperating range (c)15-46\nGas-R-410\nMake:Toshiba, O-general, Mitisubishi heavy\nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 5 | Each | |
| 28 | 28 | S/I/T/C of Drain piping: Providing and fixing Polythene-Aluminium-Polythene (PE-AL-PE) Composite Pressure Pipes confirming to IS-15450, U.V. Stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature upto 80 C, including all special fittings of composite material (engineering, plastic blend and brass inserts wherever required) e.g. elbow, tees, reducers, couplers & connectors etc., with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engineer-in-charge and with the 3 years free comprehensive warranty period. \n(i) 25mm outer dia \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS) \n | 50 | Meter | |
| 29 | 29 | Supply, installation testing and commissioning of interconnecting refrigerant pipe work (both) for suction and discharge pipes will consist 1unit) with (6/8, 3/8 mm thick) closed cell elastomeric nitrite rubber tubular insulation between each set of indoor & outdoor units as per specification , all piping inside the room shall be properly supplied with hangers with the 3 years free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer .\na) Big size 6/8\nSmall size 3/8\nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 100 | Meter | |
| 30 | 30 | S/I/T/C of 1x4 36 watt led of 240 V AC power factor greater than 95 lumens per watt more than 110 \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 16 | Each | |
| 31 | 31 | S/I/T/C of 5.5 KVA( 4.4.KW)\nOnline UPS with 30 minutes back up time.\nDC voltage system-Default 192 VDC, Adjustable 216VDC\nPhase- Single with ground \nInput:\nNominal Voltage-208 VAC/220 V C/230VAC\nAcceptable Voltage Range- 165-285 VAC\nFrequency Rage-\n40HZ-55Hz@ 50 Hz system \nOutput\nNominal voltage-\n208 VAC/220 VAC/230/VAC\nAC voltage regulation- \n+ 1 % Battery model\nFrequency range:\nMains mode (synchronised range) 45Hz-55Hz/Battery Mode 50Hz +01 Hz\nTransfer time \nAC to DC mode- Zero \nInverter to bypass mode- Zero\nBypass to inverter mode- 5ms\nWave form\nBattery mode- Pure sine wave\nEfficiency –AC mode/Battery mode- 87%/91%\nExternal Battery \nRecommended Battery type :.SMF battery\nwith charger cut off voltage adjustable from LCD digital \nBattery charging AMPERE : 2/4/6 AMP (Default 8 AMP)\nNo. of batteries 16/18 batteries \nIndicators\nLCD display – Load levels, battery level AC mode\nBattery mode bypass made and fault indicators\nBattery mode sounding every 4 seconds \nLow battery sounding every second \nOverload-sounding twice every second \nFault continuously sounding \nMake; Luminous, Eaton, Micro tek \n Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 1 | Each | |
| 32 | 32 | S/I/T/C Two way 4” Coaxial ceiling loudspeaker \n Two way 4” Coaxial ceiling loudspeaker with frequency range: 74Hz-20KHz, Power capacity (low Z): 60 W Cont. program Max. SPL: 102dB @ 1m ave., 108 dB peak, Nominal impedance: 8 ohms (in irect/bypass/8 OHM setting),70V/100 V/Transformer Taps\nMake: Bose (Design Max DM2C-LP)/JBL (Control 14 CT) audio tek\n Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 10 | Each | |
| 33 | 33 | S/I/T/C Dual channel Amplifier\nEight channel 125W @ 4 OHM power Amplifier Signal to Noise Ratio (blow rated power 20Hz to 20 khz, A- weighted ) 110 dB frequency response (at 1W, 4/8 ohms)+/-0.5 dB THD (full rated power 20hz-20khz)\nMake Bose (PM8500N)\n/JBL (CT8150) audio tek\nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 1 | Each | |
| 34 | 34 | Chairman unit Microphone\n Supply, installation, testing and commissioning of chairman unit microphone system with on/off button audio frequency bandwidth 50-20000 hz equivalent noise level 22 dB-A\nSensitivity 22 mV/Pa\nSignal to noise 72 dB-A also chairman has the authority to close the microphone of delegate persons. \nMake: Audio tek Bose/AKG(Pcc170)\n \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 1 | Each | |
| 35 | 35 | Supply, installation, Testing & Commissioning of Delegate Unit Microphone system with on/off button Audio frequency bandwidth 50- 20000 Hz equivalent noise level 22 dB-A\nSensitivity 22mv/pa\nSignal to Noise 72 db-A\nMake: Bose/AKG(Pcc170)/Audio tek \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 20 | Each | |
| 36 | 36 | S/I/T/C of Wireless Handheld Microphone \nWireless Handheld Microphone system , Carrier frequency range 500.1 MHz-864.9 Mhz, Switching bandwidth 30.5 Mhz (depending on local regulations), Auio bandwidth 35 to 20,000 Hz, Signal to Noise 120 \nMake: Bose/AKG(WMS420 vocal) /Audio tek (SV607/Audiotech SV100).\n Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 2 | Each | |
| 37 | 37 | S/I/T/C of Wireless Presenter Set Microphone\n \nWireless Presenter Set Microphone system, carrier frequency range 500.1 MHz-864.9 MHz, Switching bandwidth 30.5 MHz (deepening on local regulations), Audio bandwidth 35 to 20,000Hz, Signal to Noise 120 dB-A, Upto 16 pre-programmed frequencies per group. \nMake: Bose/AKG(WMS420 Presentor)/Audio tek Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 1 | Each | |
| 38 | 38 | S/I/T/C of 12x8 Digital Signal processor with AEC\n12x8 Digital Signal processor with Digital link and AEC12 Analog inputs (with 48v phantom power per channel) 8 Analog outputs, 112 Control inputs and 6 Logic outputs for GPIO Integration, Maximum input level: +20 dBu with odB input gain+8bu with 12 dB gain, igital input impedance: 110 ohm (AES/EBU), 75 ohm (S/PDIF), sample rate 48khz 0r 96 khz, THD+N<140dB, Maximum Analog Output level:+ 19 dbu, frequency response 20Hz-20KHz(+0.5dB/-1dB), THD:\nMake: Bose(EX-1280C)/BSS/AMX (BL0101) \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 2 | Each | |
| 39 | 39 | S/I/T/C of 8 Analog input Expander\n \n8 Analog input Expander\n8 Analog MIC/Line input, 2x RJ45 digital audio Bus port, Phantom power on all inputs, Configurable gain control at all inputs \nMake: Bose (ESP-880 with 8 incputs and 8 outputs)/ BSS/AMX.\n \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 1 | Each | |
| 40 | 40 | S/I/T/C of Interactive Flat Panel \nS/I/T/C of 86” interactive flat panel, IR Touch technology, IPS panel UHD Native Resolution (3,840x2 160), Brightness 330 Nits, Contrast ratio 1100:1 response time: 8 ms, Orientation Landscape CONNECTIVITY (input) Video/Audio HDMI (3), RGB/Audio in (input) external control RS232C In RJ45. (input) USB 2.0 (3, Front: 2ea, Bottom side 1ea only for software update), USB 3.0 (3) Touch out (USB 2.0, B Type) (2) (Output) Video/Audio HDMI (1), Optical Output/Audio Out with OPS i5 system touch type IR\nAvailable object size for touch Q 3mm \nResponse Time 60 ms (Android)/100ms(Windows) Accuracy 1.5 mm\nMake Panasonic/Samsung/LG \nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 1 | Each | |
| 41 | 41 | Digital Podium with Interactive screen \nS/I/T/C of Interactive Digital podium system with 16” interactive screen EMR technology, also available Gooseneck Microphone inbuilt Aluminium plated system interface: USB, Pressure sensitive Still image Resolution XGA, SXGA,720P, 1080P , Frame rate 20 Frames/SEC, Image Mode:\n Make: Digital Multimedia /AHA\n Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 1 | Each | |
| 42 | 42 | Video conferencing \n S/I/T/C of HD Video conference system with full functions wireless remote an omni directional boundary layer microphone and two full HD PTZ Camera and related accessories etc. as required complete system with essential software system having following features and specifications:-\na) Minimum 5 site connections in continuous presence and should be upgradable without change of hardware\nb) Multicast\nc) Dual network\nd) Dual monitor\ne) Wide band stereo full duplex audio\nf) High quality full HD video 1080/60p\ng) In built recording capabilities\nh) Communication meth-SIP, H.323\ni) Video compression method H.261, H.263, H263+, H.263++, H.264 High Profile, H.264 Baseline profile\nj) System should support full HD PTZ Camera with 12 X Optical Zoom camera with same specifications \nMake: CISCo/Panasonic/Polycom.\nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge (NS)\n | 1 | Each | |
| 43 | 43 | S/I/T/C of Connectors\nConnectors & accessories required for complete setup\nMake: Customized \n Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 1 | Each | |
| 44 | 44 | Supply Installation testing & commissioning of AP management License including cost of petty material required to complete the work upto the entire satisfaction of Engineer In charge\n Make : RUCKUS/ CISCO/ ARUBA\n Including the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 3 | Each | |
| 45 | 45 | The access point should provide for concurrent support for high definition IP video, voice and data application without needing any configuration. The feature should be\nSupport RF auto-channel selection by the following methods: a) measuring energy levels on the channel; b) monitoring for 802.11 signal structures and ; © detecting radar pulses. Other similar forms of smart selection shall also be accepted.\nChannel selection based on measuring throughput capacity in real time and switching to another channel should the capacity fall below the statistical average of all channels without using background scanning as a method.\nAP should provide minimum 23 dBm radio output power for 2.4Ghz and 5GHz both (EIRP should be limite as per govt. regulation for indoor AP’s.\nShould support transmit power tunning in 1dB increments in order to reduce interference and RF hazards.\nDevice antenna gain (intergrated must be at least 3dBi and should provide automatic interference rejection of about 10 dB.\nUpto 16BSSIDs per AP for multiple differentiated use services (e.g. voice)\nShold support upto 500 clients per AP.\nShould support IPv4 and IPv6 from day one.\nThe access point should support following security mechanism WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i.\nSystem should support Authentication via 802.1X, local authentication database, support for RADIUS and active directory.\nMechanism for physical device locking using padlock/Kensington lock/ equivalent.\nOperating Temperature: 0 degree Celsius – 40 degree Celsius Operating Humadity upto 95% non-condensing. \nShould be UL 2043 plnum dated and comply to WEEE/ROHS\nShould be EN 60601-1-2 Medical Complaint.\nShould be WPC approved; ETA certificate to be enclosed\nMake RUCKUS/ CISCO/ ARUBA\nIncluding the cost of petty material required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-charge. (NS)\n | 3 | Each | |
| 46 | 46 | S/I/T/C of 8 port layer 2 manageable switch with power on Ethernet (POE) enabled, with 8 nos. 10/100/1000 base tx POE port with to SFP Port one no. dual personality GBE Port for copper/fiber uplink, 20GBPS switching capacity, 14.88 MPPS forwarding performance, maximum power consumption 85 WATT, including the cost of petty mater required to complete the job and 3 years warranty upto entire satisfaction of Engineer-in-Charge. (NS)\nMake: CISCO/RUCKUS/ALCATEL | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
