Tender For Rfp – Sindhughosh Pontoons ( 08 No ) ( Erdd O / L-20 ) - Sindhugosh Pontoons -01 , Hull Cleaning , Hull Cleaning , Hull Survey , Utg Survey , Steel Renewals , Build Ups , Fairing , Draught Marks , Sacrificial Anodes , Surface Preparation With Grit Blasting , Painting - Jotun Scheme , Painting - Jotun Scheme , Painting - Jotun Scheme , Surface Preparation , Painting - Jotun Scheme , Surface Preparation , Deck Fitting , Manhole Cover , Manhole Securing Arrangment , Apt , Distortion , D Type Rubber Fenders -Horizontal Fenders , 15 023 D Type Rubber Fenders -Vertical Fenders D Shaped Rubber Fenders Perished / Cracked, To Be Renewed, As Per Nes 170 ( B ) Fenders Details Are As Follows - Mat-Epdm, Colour-Black Rubber 800 Mm ( 3X4 Corners ) 024 Fenders Brackets - Horizontal Horizontal Fender Securing Brackets ( Flat Bars Including Ms Pad Of Both Ends, Mat- Ms ) Corroded / Thinned / Perishe , To Be Renewed ( A ) Thickenss Of The Brackets 12 Mm, 1400 X 130Mm 024 Fenders Brackets Vertical Vertical Fender Securing Brackets ( Flat Bars Including Ms Pad Of Both Ends, , Mat- Ms ) Corroded / Thinned / Perishe , To Be Renewed ( B ) Thickenss Of The Brackets 12 Mm, 1200X130mm 025 Lifting Eye Lifting Eye Corroded / Thinned / Perished To Be Renewed As Per Survey Reports ( A ) Thickness Of Rod 40Mm, Outer Dia Of Ring 07 Seven, Base Size 9X5X12mm Doubler Plate Size 14X11X20mm 025 Lifting Eye ( B ) Load Testing Of Lifting Eyes Is To Be Carried Out Post Sunewel / Repaired If Any ( Test Load To Be Applied 7.5 T, Swl 3.0T ) 026 Dead Weight Renew Damaged Dead Weights Approx Size 350X350x350 Mm Weight 40 Kgs Each / Mat Cement Sindhugosh Pontoons - 02 001 Docking- Vessel To Be Docked In Both Versions. Note 1:- Firms Not To Quote View Docking, Undocking And Dock Blocks Preparation Will Be Done By Navy And The Job Is Required To Be Carried Out In Navy Premises ( I.E Nd ( V ) Slipway ) . Note 2:- Last Un Dock -06 Mar 17 002 Hull Cleaning Under Water And Boot Top Area Hp Jet Clean Entire Under Water Area And Boot Top Area ( With A Pressure Not Exceeding 3000 Psi ) Including Ship Side And Remove The Marine Growth / Barnacles Andpresent For Survey ( Approx Weight Of Pontoon - 10 Tons ) . ( A ) U / W Area: 25 Sqm ( B ) Boot Top Area: 7 Sqm 002 Hull Cleaning Above Water Area ( A ) Clean The Entire Above Water Area With Hp Jet Washing ( With A Pressure Not Exceeding 3000 Psi ) To Remove Salts And Contaminants From The Surface I.A.W. No 01 / 15 And Present For Survey 002 Hull Cleaning Weather Deck ( B ) Clean The Entire Weather Deck Including Fittings Area With Hp Jet Washing ( Not Exceeding 3000 Psi ) To Remove Salts And Contaminants From The Surface. I.A.W. No 01 / 15 And Present For Survey 002 Hull Cleaning Tanks ( C ) Manually Clean Internal Tanks I.A.W. No 01 / 15 And Present For Survey. The Tanks Should Be Washed Out With Fresh Water And Soap Water To Remoeve Any Sediment Or Dirt Present In The Tank 003 Hull Survey External And Internal Hull Survey. Hull Survey. Carry Out Visual And Hammer Survey / Utg Survey In Accordance With No 19 / 06 Of Under Water Hull, Boot Top, Above Water Hull, Weather Decks And All Internal Tanks Etc, All Stiffeners And Deck Fittings Including Lifting Hooks / Eyes. All Manholes To Be Inspected And Repaired To Ensure Water Tightness, Chalk Impression Test To Be Carried Out. Approx Area: 275 Sqm 004 Utg Survey Quote For Utg Survey Points At U / W Hull, Above Water, Weather Deck And Covering Entire Part Of Hull. 005 Steel Renewals Quote For Steel Renewal At Various Locations As Per Survey Report. Note 1:- Quoted Repair Cost Shall Include Cost Of Both Sides Blasted And Primed Grade `A’ Quality Building Steel For Shell And Is 2062 Grade `B’ Quality Steel For Non Structural Works, Renewal Of All Obstructions In Way Of Steel Renewals Including Minor Fittings With Their Foundations, Etc., As Indicated By Survey Team / Rmt, Proving Of The Weld Runs By Non-Destructive Tests And By Hose Test On Completion Of Welding, Pressure Testing And Proving Of Tanks Where Steel Renewal Undertaken Etc. 006 Build Ups Carry Out Build Ups As Indicated By The Hull Survey Team / Surveyor ( A ) Approx Size 2.5X2.5 Mm-250 006 Build Ups Carry Out Build Ups As Indicated By The Hull Survey Team / Surveyor ( B ) Approx Size 5X5 Mm - 150 Nos 007 Fairing Carryout Fairing Of Deformed Structures As Indicated By Hull Survey Team / Surveyor 008 Re-Welding Run Carry Out Re-Welding Runs On Weld Seams As Indicated By Hull Survey Team / Qc / Rmt. 009 Draught Marks Draught Marks Corroded / Eaten Away, To Be Renewed And Painted. Both Roman And Numeric. 010 Sacrificial Anodes Renew Sacrificial Anodes ( Mk I ) Those Consumed More Than 50% Note:- Anodes Navy / Coy Supply. 011 Surface Preparation With Grit Blasting Under Water Area Including Boot Top Area Spot Blasting To Sa 2.5 On Paint Damaged Areas / Renewed Plate Areas As Per The Paint Oem Rep Recommendation For Paint Application. 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Primer - Penguard Primer - 50 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Anti Corrosive - Jotacote Universal ( Aluminium ) - 150 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( C ) 3Rd Coat: Anti Corrosive - Jotacote Universal ( Grey ) - 150 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( D ) 4Th Coat: Tie Coat: Safeguard Es - 125 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( E ) 5Th Coat: A / F: Seaquantum Ultra ( Brown / Light Red ) - 150 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( F ) 6Th Coat: A / F: Seaquantum Ultra ( Red Brown / Dark Red ) - 150 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( G ) 7Th Coat: A / F: Seaquantum Ultra ( Brown / Light Red / Black ) - 150 Microns 012 Painting - Jotun Scheme Under Water Area Including Boot Top Area Paint Under Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( H ) 8Th Coat: A / F: Seaquantum Ultra ( Black ) - 150 Microns 013 Surface Preparation Above Water Area Carry Out Surface Preparation With Mechanical Cleaning On Above Water Area To Sa2.5 Standard Under The Suprvision Of Paint Oem. 014 Painting - Jotun Scheme. Above Water Area Paint Above Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Penguard Primer - 50 Microns Dft 014 Painting - Jotun Scheme. Above Water Area Paint Above Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Jotamastic ( Grey / Red Brown ) - 125 Microns Dft 014 Painting - Jotun Scheme. Above Water Area 014 Painting - Jotun Scheme. Above Water Area Paint Above Water Area With Following Paint Scheme As Per Oem Recommendations:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( D ) 4Th Coat: Hard Top Xp Grey - 60 Microns Dft 015 Surface Preparation Weather Decks And Fittings Carry Out Mechanical Cleaning To Wj2 Standards As Per Survey Report Of Paint Oem For Paint Application For Entire Weather Deck. 016 Painting - Jotun Scheme Weather Decks And Fittings Paint Weather Decks And Fittings With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Primer - Penguard Primer -50 Microns Dft 016 Painting - Jotun Scheme Weather Decks And Fittings Paint Weather Decks And Fittings With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Jotamastic 87 Of 200 Microns 016 Painting - Jotun Scheme Weather Decks And Fittings Paint Weather Decks And Fittings With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( C ) 3Rd Coat: Jota Armour Dark Grey Of 800 Microns 017 Surface Preparation Internal Tanks ( A ) Carry Out Mechanical Cleaning To St3 Standard At Paint Defective Area / As Survey Report Of Paint Oem For Paint Application. 017 Surface Preparation Internal Tanks ( B ) Carry Out Mechanical Cleaning To St1 Standard At Paint Defective Area / As Survey Report Of Paint Oem For Paint Application. 018 Painting - Jotun Scheme Paint All Internal Tanks With Following Paint Scheme Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Primer - Penguard Primer -50 Microns Dft 018 Painting - Jotun Scheme Paint All Internal Tanks With Following Paint Scheme Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Anticorrosive Balloxy ( Hb Light ) - 150 Microns 018 Painting - Jotun Scheme Paint All Internal Tanks With Following Paint Scheme Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( C ) 3Rd Coat: Anticorrosive Balloxy ( Hb Light ) - 150 Microns 019 Deck Fitting ( A ) Twin Bollards On Weather Deck Corroded / Thinned / Perished , To Be Repair / Renewal As Per Survey Reports ( Mat. - Ms ) 400Mmx800mmx08mm Base, 600Mmx200mmx08mm U Plate, 250Mmx160mmx06mm Pipes, 400Mmx25mm Stag Horns ( Rods ) Deck Fitting ( B ) Ms Cleats On Weather Deck Including Locking Pins Perished / Uprooted To Be Repaired / Renewed ( Mat Ms ) As Per Survey Reports. Mat-Ms. 019 Deck Fitting ( C ) Carry Out Load Testing Of Twin Bolllrads Load Testing Of Securing Eyes Post Welding ( Test Load To Be Applied 7.5 T, Swl 3.0T ) 020 Manhole Cover ( A ) Manhole Cover Neoprene Rubber Joints Perished, To Be Renewed ( Rubber Joint Size: - 520Mm X 760Mm X08 Mm ) 020 Manhole Cover ( B ) Manhole Cover Including Coamings Perihsed / Thinned To Be Renewed As Per Survey Report ( Approx Size - 3X18 ) 020 Manhole Securing Arrangment C ) Manhole Stud Nut And Bolts With Washers Corroded / Perished To Be Renewed. ( Size Of Stud Bolt -16 Mm X 50Mm Length, 32 Nos On Each Manhole, Mat Ss ) . 020 Manhole Cover ( D ) Handle Of Manhole Covers Corroded / Thinned, To Be Renewed, ( Mat-Ms Rod, 12 Mm Thick 021 Apt Air Pressure Test The Following Tanks And Rectify The Defects Any Observed During Pressure Testing And Prove To 0.14 Kg / Cm2. Note:- Apt And Proving Of Those Tanks Wherein Steel Renewal Undertaken As Part Of Steel Renewal Dl. 0003 ( C ) Above Is That Of Firms Liability With No Additional Cost And Those Tanks Where No Steel Renewals Undertaken Only Would Be Considered For Payment As Per The Indicated Rates Under This Dl. Serial. Internal Tank 022 Distortion Areas In Which Distortion Of Hull Structures Exceeds 3 Times The Thickness Of Plate Or 1 / 20 Of The Frame Spacing ( Which Ever Is Smaller ) Shall Be Renewed. In The Areas Of Dents, The Structure Shall Be Inspected For Any Distortion Of The Stiffeners Inside And Cracks By Dp Test. 023 D Type Rubber Fenders -Horizontal Fenders D Shaped Rubber Fenders Perished / Cracked, To Be Renewed As Per Nes170 ( A ) Fenders Details Are As Follows - Mat-Epdm, Colour-Black Rubber 1000 Mm- ( 6 +6 Both Side ) 023 D Type Rubber Fenders -Vertical Fenders D Shaped Rubber Fenders Perished / Cracked, To Be Renewed, As Per Nes 170 ( B ) Fenders Details Are As Follows - Mat-Epdm, Colour-Black Rubber 800 Mm ( 3X4 Corners ) 024 Fenders Brackets - Horizontal Horizontal Fender Securing Brackets ( Flat Bars Including Ms Pad Of Both Ends, Mat- Ms ) Corroded / Thinned / Perishe , To Be Renewed ( A ) Thickenss Of The Brackets 12 Mm, 1400 X 130Mm 024 Fenders Brackets Vertical Vertical Fender Securing Brackets ( Flat Bars Including Ms Pad Of Both Ends, , Mat- Ms ) Corroded / Thinned / Perishe , To Be Renewed ( B ) Thickenss Of The Brackets 12 Mm, 1200X130mm 025 Lifting Eye Lifting Eye Corroded / Thinned / Perished To Be Renewed As Per Survey Reports ( A ) Thickness Of Rod 40Mm, Outer Dia Of Ring 07 Seven, Base Size 9X5X12mm Doubler Plate Size 14X11X20mm 025
