Various Electrification Works At Kums Hanumangarh-1 Part-A (Supply, Installation & Commissioning of IP CC TV Camera System at KUMS - Hanumangarh) 2 SITC of IP 67, IK 10, full HD 1920*1080, 20-60 fps, 4 MP, ONVIF profile S/profile G, True day/night, Bullet camera having wide dynamic range up to 120 dB 2.7-12mm fixed lens with 16X digital zoom, S/N ratio 50-60 dB, Provision of Auto/manual white balance, gain control & on board micro SD card support, IPv6 ready, Supports all standard protocols, operating temperature range of 20 degree celcius to 50 degree celcius. The work includes complete installation, outdoor weather proof camera enclosure, mounting brackets, clamps etc. required for successful operation of system of make BOSCH/ Honeywell (HBW4PER2) / Sony. 3 SITC of network video recorder of 32 channel HD recording, user friendly operation with features to view record, playback, live view and remotely control the system simultaneously with 4 SATA interface to support 04 TB HDD, 19PoE, VGA output, HDMI, multiscreen display of 1/4/8/16 windows, Ethernet LAN with RJ-45 connector of make, Samsung/Sony/ Honeywell. 4 SITC of IP65 outdoor high gain wireless radio link of minimum 2.4-5.0 GHZ, upto 300 Mbps speed, 16 dBi dual polarized, compliant with 802.11a, 802.11b/g/n, Multi operation support gate way/VVIP S/Client/Access Point/ Repeater. The antenna should have ESD protection of 15 KV, lighting protection 4 KV, integrated firewall, 64/128 bit WEP encryption, powered by passive POE injector/12 V DC supply. The work includes supply & fixing of weather proof MS box, S&F of 4 port switch, power distribution unit, connecting cables from camera to switch & antenna, complete work including making connection of power cable etc. as required for successful transmission of video data to control room of make WIS- NETWORK/ALCON. 5 SITC of high performance 4 TB surveillance Hard Disc Drive to be fitted in existing NVR of make Western Digital (WD)/Seagate. 6 SITC of base terminal station complete with high gain antennas for 360 degree receiption of wireless surveillance camera system signals of the same OEM as CPE, to be mounted over 12 mtr tripod shaped MS tubular self supporting mast (price included), complete with fixing & suitable bolting support at roof along with all accessories like stay wirless, data/power cable upto control room complete in all respect. 7 Supply, installation & commissioning of Smar LFD signage display of screen size : 55 (138 cm diagonal), in built two speakers, LED backlit type, wall/ table mount type of following specifications with making connectivity of devices with surveillance system with the help of signal/ 2 mtr. HDMI cables as required along with all accessories : SONY/LG/SAMSUN/ BARCO/ NEC/ PANASONIC Make) 8 Resolution : 1920*1080 (16:9) FULL HD 9 Brightness : minimum 450 nit 10 Scree type : Non touch 11 Duty Cycle : 24*7 12 Viewing angle : 178:178 13 Power : AC 100-240v 50 HZ 14 All in all comprehensive maintenance of wireless CCTV system including replacement of components, consumables, servicing etc. complete in all respect after defect liability period of the equipment to keep the wire less CCTV working through out the year. 15 Part-B (Providing and fixing of Public Announce and Evacuation system in Mandi Yard at KUMS - Hanumangarh) 16 SITC of 120W Mixer amplifier As per specifications mentioned below 17 Amplifier output Power: Rated output: 120W Maximum output: 180W 18 Mounting : 19 Rack mount 19 Frequency response (Line): 100 Hz to 10 kHz (+1/-3 dB @ -10 dB ref. rated output) 20 Frequency response (Mic.) : 70 Hz to 20 kHz (+1/-3 dB @ -10 dB ref. rated output) 21 Dynamic range : 93dB 22 Distortion: <1% @ rated output power, 1 kHz 23 S/N (flat at max volume) : >60 dB (mic.); >70 dB (line) 24 Bass Control : Max. + 8 dB 25 Treble Control : Max. + 8 dB 26 Operating Humidity (RH%) 90% 27 Input / Mic, Line 28 Front Panel Control indicators: 29 ON / OFF Switch 30 Power ON LED 31 Master volume knob 32 Four volume knobs for microphone inputs 33 Volume knob for background music 34 Knob for treble level 35 Knob for bass level 36 Headphone socket 37 Amplifier should have Separate music Input with Volume control 38 Amplifier should have priority output Channel for naddressing areas where only priority announcements nare required 39 Amplifier should have priority Input Channel which can take priority over all other microphone and music inputs, incase of any urgent and priority announcement 40 Amplifier should have built in FAN for cooling of amplifier component 41 Acoustic noise level of fan: <48 dB SPL @ 1 m 42 Operating temperature: 0 ºC to +55 ºC 43 Relativehumidity: <95% 44 Certifications: EN 60065, EN 55103-1, EN 55103-2 45 Amplifier should be Ahuja, Bosch, AUTOMATION make 46 SITC of IP65 outdoor high gain wireless radio link of minimum 2.4-5.0 GHZ, upto 300 Mbps speed, 16 dBi dual polarized, compliant with 802.11a, 802.11b/g/n, Multi operation support gate way/VVIP S/Client/Access Point/ Repeater. The antenna should have ESD protection of 15 KV, lighting protection 4 KV, integrated firewall, 64/128 bit WEP encryption, powered by passive POE injector/12 V DC supply. The work includes supply & fixing of weather proof MS box, S&F of 4 port switch, power distribution unit, connecting cables from camera to switch & antenna, complete work including making connection of power cable etc. as required for successful transmission of video data to control room of make WIS- NETWORK/ALCON OR any reputated brand as approved by Engineer in charge satisfying above specification. 47 Supply, installation, testing and comissioning of 230W Booster amplifier as per tender specifications (Amplifier should be the same make as PA controller) 48 The main function of the power amplifier is the amplification of audio signals for the loudspeakers. It shall be possible to select the output voltage between 100V, 70V or 50V by changing output. The power amplifiers are provided with compact 19, 2U & 3U high housing for tabletop use and rack mounting, while the maximum amplifier wattages varies from 120w to maximums 960w. 49 The amplifiers are protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output power and low acoustic noise at lower power output. Additionally, all booster amplifiers have an overheat protection circuit that switches off the power stage if the internal temperature reaches a critical limit due to poor ventilation or overload. 50 Balanced input and a loop-through connector shall be available for easy connection of multiple booster amplifiers to increase the available output power. The power amplifier shall obtain two balanced inputs with priority control, each with a loop-through facility. This allows for easy and automatic switching between e.g. a local music source and a priority announcement from a remote system. 51 An additional 100V line input is provided to connect the booster amplifiers to a 100V loudspeaker line, for additional output power e.g. on remote locations. Sensitivity or level control is located on the rear of the unit to avoid accidental setting change. A VU-meter with LED-bar shows the output level. 52 The amplifiers not only provide 70V and 100V outputs for constant voltage loudspeaker systems, a low impedance output for 8 Ohm loudspeaker loads is available for different usage. 53 PERFORMANCE 54 Frequency response 50 Hz – 20 kHz (+1/-3 dB, 55 INPUTS 56 Line input/balanced 57 Sensitivity 1 V 58 Impedance 20 kOhm 59 100V input (Screw, unbalanced) 60 Sensitivity 100 V 61 OUTPUTS 62 Line loop through output t/ balanced) 63 Nominal level 1 V 64 Impedance direct connection to line input 65 Line loop through output 1,2 (3-pin XLR, balanced) 66 Impedance direct connection to line input 67 Loudspeaker outputs (Screw, floating) 68 ENVIRONMENTAL CONDITIONS 69 Operating temperature range 0 to +55°C 70 Relative humidity <95% 71 Amplifier should be Ahuja, Bosch, BEHRINGER make 72 SITC of 30W outdoor IP 65 Horn type speaker with driver unit as per specifications mentioned below 73 Rated Power: 40W , Maximum Power: 45Watt 74 Type of Speaeker: outdoor Horn type 75 frequency range @ -10dB : 280Hz to 9.5kHz n 76 Opening angle (at 1 kHz/4 kHz, -6dB): 70°/40° 77 Sound pressure level at rated power/1 W: 125 dB/123/95 dB (SPL) 78 Degree of Protection: IP 65 protect against Water and dust 79 Rated/Operating Voltage : 100V 80 Speaker should be able to withstand acoustical Feedback two times ntheir rated power for short durations. 81 Material of construction: aluminum with ABS Plastic 82 Operating temperature: 0°C to 55°C. 83 Humidity: 0 to 95 % non condensing 84 Certification: IEC 268-5, CE, UL 94 V0, EN 60065 85 Amplifier should be Ahuja, Bosch, AUTOMATION make 86 Supply of wireless/Cordless hand held microphone unit : The unit must incorporate a receiver 2 unit & a wireless/cordless hand held microphone. The microphone should be dynamic, super cardioids type with RF output power of 15mW (max) & 98-100 dB dynamic range with internal dipole antenna. The microphone must have on/off switch with red LED & having AA type (UM-3) alkaline cells with life of 15-20 hrs. The unit must have coverage area more than 100 Mtr. The receiver must have dual squelch & operate at quartz crystal locked VHF high band frequency & with frequency response range 20 Hz-20 K Hz. The unit must have telescopic antenna & audio output -56 dBV/Pa (1.6 mV) power on/off switch audio output vol. control, squelch level control and having red LED for power on, yellow LED for RF reception & green LED for audio signals the etc. S/N ratio should not be less than 100dB etc. as required. 87 SITC of base terminal station complete with high gain antennas for 360 degree receiption of wireless surveillance camera system signals of the same OEM as CPE, to be mounted over 12 mtr tripod shaped MS tubular self supporting mast (price included), complete with fixing & suitable bolting support at roof along with all accessories like stay wirless, data/power cable upto control room complete in all respect. 88 All in all comprehensive maintenance of wireless PA system including replacement of components, consumables, servicing etc. complete in all respect after defect liability period of the equipment to keep the wire less PA system working through out the year.
