Addn/Altn To Ductable, Package And Vrf Ductable Type Ac Plants Of B4 Ward, Dialysis Centre, Main Lab, Medical Ii, Iii & Iv, Medical Board Centre, Chest Opd, C4, C5, Surgical Ii & Iii And Comprehensive Maint Of Vrf System, Ductable A, Package Ac And Connec, DELHI CANTT-Delhi

Addn / Altn To Ductable, Package And Vrf Ductable Type Ac Plants Of B4 Ward, Dialysis Centre, Main Lab, Medical Ii, Iii & Iv, Medical Board Centre, Chest Opd, C4, C5, Surgical Ii & Iii And Comprehensive Maint Of Vrf System, Ductable A, Package Ac And Connected Items During & After Defect Liability Period At Base Hospital Under Ge ( E / M ) Base Hospital Delhi Cantt-10 - 1 Surface Dressing N. Exc 15 Cm Deep & Getting Out In Soft / Loose Soil Complete All As Specified & Directed. 2 Excavation In Trenches N.Exc. 1.5M Wide & N.Exc. 1.5M In Depth For Foundations Etc And Getting Out As In Soft / Loose Soil Complete All As Specified & Directed 3 M&L Pcc 1:4:8 Type D-2 ( Using 40Mm Graded Stone Aggregate ) As In Foundation, Filling And Mass Concrete Complete All As Specified & Directed 4 Earth Filling Under The Floors Using Approved Excavated Soil Including Watering, Ramming Spreading In Layers Not Exc 25 Cm Thick Complete All As Specified & Directed. ( Note :- Approved Earth Obtained From Excavation Will Be Used. ) 5 M&L Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Not Exc 6 Metre Mean Radius, Built In Cement Mortar 1:6 Complete All As Specified And Directed. 6 M&L Damp Proof Course To Horizontal Surface Including Necessary Form Wlork In Cement Concrete 1:2:4 Type B-0, 25Mm Thick Complete All As Specified & Directed 7 Applying Evenly A Coat Of Blown Type Bitumen At The Rate Of 1.50 Kg Per Square Metre And Blinding With Clean Dry Sand @ 0.05 Cu. M. Per Sq. M Followed By Polythene Film 150 Micron Thick Complete All As Specified & Directed 8 M&L Rcc 1:2:4 Type B-1 ( Using 20 Mm Graded Stone Aggregate ) As In Lintels Up To 1.5M Clear Span, Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Up To 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Including Necessary Form Work Etc Complete All As Specified & Directed 9 S&F Ms Tmt Bars 10Mm Dia & Over Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding Withand Including Ms Wire ( Annealed ) N.Less Than 0.9 Mm Dia Or Securing With Clips Complete All As Specified & Directed 10 S&F Mild Steel Tmt Bars 5Mm Dia & Over Upto And Including 10 Mm Dia In Stirrups, Spacers And Binders And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 09Mm Dia Or Securing With Clips Complete All As Specified & Directed 11 S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc As In Roof Trusses ( Framed ) , Trussed Purlins, Using Erw Or Induction Butt Welded Tubes Conforming To Is 1161-1979 Grade St-240 Including Distance Pieces, Cleats Etc Complete With & Including One Shop Coat Of Zinc Chromate Primer ( Including Preparation Of Surface ) At Contractor’S Workshop Before Fabrication Complete All As Specified And Directed. 12 S&F Steel Work In Tubular Column, Purline, Rafter Etc Using Erw Or Induction Butt Welded Tubes Conforming To Is 1161-1979 Grade St-240 Including One Shop Coat Of Zinc Chromate Primer ( Including Preparation Of Surface ) At Contractor’S Workshop Before Fabrication Complete All As Specified And Directed. 13 S&F Mild Steel Plate ( Plain Or Chequered ) , Channels, Square Cut Or Notched ( Ordinary And Counter Sunk ) Forming Holes With Welded Attachment To Gi Pipe In Base / Connections Etc. Complete All As Specified And Directed. 14 S&F Mild Steel Bolts Purpose Made With Hexagonal Or Square Head One End And Screwed The Other Or Screwed Both Ends; Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut Exc 30Cm Long, Dia Of Neck Exc 12 Mm But Not Exc 20Mm, Length 60Cm Complete All As Specified And Directed. 15 S&F Mild Steel Screw Bolts ( Machine Made ) Dia Of Neck 10Mm With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Not Exc 5Cm Long Complete All As Specified And Directed. 16 S&F In Position Pre- Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour, Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And Directed. 17 S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Ridge / Valley Gutter, Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And Directed. 18 M&L For Hardcore Of Gauge N Exc. 63 Mm, Using Broken Stone Or Boulders Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified & Directed. 19 M&L Pcc 1:2:4 Type B-1 Using 20Mm Graded Stone Aggregate As In Sub Base, Finished Fair & Even To Receive Top Layer Etc Complete All As Specified & Directed 20 M&L Machine Cut Kota Stone Slab 20 To 25 Mm Thick In Flooring, Laid And Jointed With Grey Cement Slurry With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Over And Including 20Mm Thick Screed In Cement Mortar 1:6 Complete All As Specified And Directed. 21 M&L 20Mm Thick Marble Work Using Makarana White Marble Stone ( Table Rubbed And Polished ) Laid In Pattern ( 10 To 15 Cm Wide Strips Between Flooring ) As In Floor Including Pointing In White Cement And Marble Dust ( 1:2 ) To Match With Shade Of Makarana White Marble Shade Over And Including 20Mm Thick Screed In Cement Mortar 1:6 Complete All As Specified And Directed. 22 M&L 10 To 12 Mm Thick Makarana White Marble Stone Work In Skirting / Dado Including Pointing In White Cement And Marble Dust ( 1:2 ) To Match With Shade Of Makarana White Marble Shade Over And Including 10Mm Thick Screed In Cement Mortar 1:4 Complete All As Specified And Directed. 23 M&L Rendering 15Mm Thick In Cm 1:6 On Other Than Fair Faces Of Brick Work Or Concrete Surfaces Followed By A Coat Of 1 To 2Mm Thick Wall Care Putty With Sand Papering, Finished Even & Smooth Complete All As Specified & Directed 24 M & L For Washed Stone Grit Plaster On Exterior Walls In Two Layers, Under Layers 12 Mm Thick Cement Plaster 1:4 Mixed With Wpc ( 1 Cement :4 Coarse Sand ) Following The Under Layer With Scratching Tool, Applying Cement Slurry On The Under Layer @ 3 Kg Of Cement Per Square Metre, Top Layer With 15 Mm Thick Cement Plaster 1:1 / 2:2 ( 1 Cement: 1 / 2 Coarse Sand:2 Coloured Marble Stone Chipping 10Mm Nominal Size ) Including Using Colour Pigment & Marble Powder As Required In Ground In Panels With Groove All Around As Per Approved Pattern Including Scrubbing And Washing The Top Layer With Wire Brushes And Water To Expose The Stone Chippings Complete All As Specified And Directed. ( Note: Payment For Providing Grooves & Wpc Shall Be Made Separately Under Respective Item Of This Schedule ) 25 M&L Preparation Of New Plastered Wall Surfaces And Applying Two Coats Of Oil Bound Distemper Over And Including A Coat Of Alkali Resistant Primer Complete All As Specified And Directed. 26 M&L For Forming Groove Of Uniform Size 15Mm Wide And 15Mm Deep In The Top Layer Of Washed Stone Grit Plaster As Per Approved Pattern Using Wooden Battens, Nailed To The Under Layer Including Removal Of Wooden Battens, Repair To The Edges Of Panels And Finishing The Groove Complete All As Specified And Directed. 27 M&L Returning, Filling In, Including Spreading, Leveling Watering And Well Ramming In Layers Not Exc 25Cm In Soil Complete All As Specified & Directed 28 Removing Excavated Material ( Any Type Soil / Debris ) Outside Mod Land And Depositing Where Directed At A Level N Exc 1.5M Above The Starting Point Complete All As Specified & Directed 29 M&L Machine Cut Kota Stone Slab 20 To 25Mm Thick In Treads In One Piece ( Length Will Be As Per The Width Of Staircase ) Laid Over And Including Screed Bed Or Bedding Layer Mortar 20Mm Thick In Cement Mortar 1:4 For Laying Floor Finished Jointed And Pointed With Grey Cement Slurry Mixed With Pigments To Match The Sheds Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified And Directed. 30 M&L Machine Cut Makarana White Marblr Stone Slab 18 To 20Mm Thick In Riser In One Piece ( Length Will Be As Per The Width Of Staircase ) Laid Over And Including Screed Bed Or Bedding Layer Mortar 15Mm Thick In Cement Mortar 1:3, Jointed And Pointed With White Cement Slurry To Match The Sheds Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified And Directed. 31 Labour Only For Grooves Over Stair Case Trades Complete All As Specified & Directed 32 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations Complete All As Specified & Directed 33 M&L Two Coats Of Synthetic Enamel Paint Over One Coat Of Red Oxide Primer After Necessary Preparation Of New Steel Surface Over 10 Cm In Width Or Girth Complete All As Specified & Directed 34 M&L 75 Mm Thick Pcc 1:3:6, Type C-1, Using ( 20Mm Graded Stone Aggregate ) As In Plinth Protection / Hard Standing And Finished The Surface Fair & Even Without Using Extra Cement, Laid In Panel, Including Filling The Joints With Sand Mixed With Bitumen In 1:1 Ratio Complete All As Specified And Directed. 35 Taking Down Of Chowkhat Or Frame ( Without Taking Off Shutter From Frame ) Area Exc 1.50 Sqm But N.Exc 4Sqm Each Including Builder Hardware Fitting Complete All As Specified And Directed. 36 S&F Aluminium Anodised Various Section Powder Coated As Required For Door / Window / Ventilators Etc ( Side Hung / Top Hung / Sliding ) Including Fixing And Making The Frames Hinges To Receive Glass / Wire Gauge Etc. Complete Including All Required Powder Coated Fittings Such As Peg Stays, Hinges Type B-21 100Mm Long, Suitable Al Handle, Aluminium Tower Bolt, Rubber Beading, Clips, Locking Arrangement For Shutter, Sealant Etc Complete All As Specified & Directed Nnote:- ( I ) Aluminium Door / Window / Ventilators To Be Fixed With Cadmium Plated Screw Not Less Then 300 Mm C To C & Sealing The Joints Between Frames & Granite / Kota Stone With Polysulphide Sealant As Per The Manufactures Instruction. N ( Ii ) Lock, Double Action Floor Spring, Hydraulic Door Closer & Glass Pane / Pre-Laminated Particle Board For Door Shutter Shall Be Paid Separately. 37 S&F Brass Mortice Lock 100Mm 6 Lever Vertical Type ( Suitable For Aluminium Door ) With Duplicate Key And Handle Set Complete All As Specified & Directed 38 S&F Double Action Floor Spring Hydraulically Regulated Made Up Of Minimum 1.25 Mm Thick Aluminium Alloy Sheet Foundation Box, Main Body With Stainless Steel Cover, Governing Pivot Made Of Brass, Other Parts Made Of Mild Steel Heavy Duty And Fixed Complete All As Specified & Directed 39 S&F Sheet Glass 4.8 Mm Thick Ordinary Quality Fixed With Aluminium Beads In Sqm N. Exc 0.50 Sqm In Each Panes Complete All As Specified & Directed 40 M&L For Prelaminated Particle, Board, Exterior Grade, Prelaminated Both Side With Decorative Choice Laminations 12Mm Thick Fixed With Aluminium Beading To Aluminium Frame Work Frame Work Complete All As Specified & Directed 41 Dismantling Wall And Ceiling Boards ( Fibre, Pulp, Insulation, Etc. ) Or Insulation Boards / Slabs / Blankets, Any Thickness, Including Cover Fillets Etc Complete All As Specified And Directed. 42 Dismantling Of Existing Gi Ceiling Frame Complete Including Hangers Of Any Dia Etc Complete All As Specified & Directed 43 S&F Gl Powder Coated Frame Work For Seamless Ceiling Comprising Of Gl Perimeter Channnel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30 Mm And Web Of 27 Mm Fixed To Surrounding Wall Using Nylon Sleeves And Screws At 450 Mm Centre To Centre / Intermediate Channel 0.9 Mm Thick Having Two Equal Flanges Of 15 Mm Each And Web Of 45 Mm Suspended From Soffit At Approx 900 Mm Centre To Centre With Gl Cleat And Steel Expansion Fasteners With And Including Ceiling Section ( Not Exc 1.2 M Length ) Of 0.55 Mm Thickness Having Kurled Web Of 50 Mm And Flange Of 26 Mm Each With Lips Of 10.5 Mm Fixed To The Intermediate Channel With Connecting Clips Across The Intermediate Channel At 457 Mm Centre To Centre Complete All As Specified And Directed. 44 S&F 4Mm Fully Threaded Ms Adjustable Rods ( Up To 1200Mm Length ) With Galvanised Steel Level Clips, Spaced At 1200Mm Centre To Centre Along Main T, Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X 3Mm Size 60Mm Long And Expansion Hold Fasteners 12.5Mm Dia, 50Mm Long Complete All As Specified And Directed. 45 S&F 15Mm Thick Integral Densified Micro Look Edged Eco Friendly, Bio Safe Anti-Microbial & Anti-Bacterial Fungae Free ( Suitable For Hospital Rh-100 Product ) , Light Weight, Calcium Silicate False Ceiling Tiles Plain With Pin Holes Of Approved Texture Of Size 595X595mm, At Any Height, In True Horizontal Level, Suspended On Inter Locking Grid Screws Including Cutting / Making Opening For Service Like Diffusers, Grill, Light Fittings, Fixtures Smoke Detector Etc Wherever Required Of Aerolite / Armstrong And Equivalent Complete All As Specified And Directed. 46 Fixing Only As In Repair Ceiling Board Of Any Make & Description Of Size 595X595mm Complete All As Specified & Directed 47 S&F Door Closer, Aluminium Body Hydraulically Regulated, Designation No. 1 Universal Type, Suitable For Door Shutters Up To 700 Mm In Width And Of Weight Not More Than 35 Kg And Fixed Complete All As Specified & Directed 48 All As Per Srl Item No 47 Here-In-Before But Fixed As In Repair 49 M&L Machine Cut Granite Stone Slab 20Mm Thick Dressed True And Square, In One Length Not Less Opening Size In Door / Window In Jambs & Cill ( Provided In Two Layers With Overlap In Cill & In Single Layer In Jamb & Length Will Be As Per The Length Of Cill & Jamb Of Door / Windows ) , Etc., Punched Dressed On Exposed Faces And Self Faced On The Embedded Unexposed Beds And Joints; Exposed Edges Rounded Or Chamfered As Directed, Set, Jointed And Pointed In Mortar & Over & Including Cement Screed Base 20Mm Thick In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Slab Including Rubbing And Mirror Polishing And Moulding Complete All As Specified & Directed 50 Supply Only Integral Water Proofing Compound Complete All As Specified & Directed 51 M&L For Treating The Bottom And Sides Of Excavation At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area Complete All As Specified & Directed 52 M&L For Treating The Back Fill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface Complete All As Specified & Directed. ( Note :-Area Of The Sub Structure In Contact With Backfill To Be Measured ) 53 M&L For Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Complete All As Specified & Directed 54 M&L For Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area Complete All As Specified & Directed 55 M&L For Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall Complete All As Specified & Directed

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	03-Feb-2021	Amendment No. 1	Date	16-02-2021
2	08-Feb-2021	Amendment No 2	Date	23-02-2021
3	15-Feb-2021	Amendment No 3	Date	27-02-2021
4	17-Feb-2021	Amendment No 4	BOQ	27-02-2021

INR 3000 /-

INR 618000.0 /-

Refer document

Name of Work : ADDN/ALTN TO DUCTABLE, PACKAGE AND VRF DUCTABLE TYPE AC PLANTS OF B4 WARD, DIALYSIS CENTRE, MAIN LAB, MEDICAL II, III & IV, MEDICAL BOARD CENTRE, CHEST OPD, C4, C5, SURGICAL II & III AND COMPREHENSIVE MAINT OF VRF SYSTEM, DUCTABLE A, PACKAGE AC AND CONNECTED ITEMS DURING & AFTER DEFECT LIABILITY PERIOD AT BASE HOSPITAL UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Surface dressing n. exc 15 cm deep & getting out in soft / loose soil complete all as specified & directed.	1	1000	Sqm
2	2	Excavation in trenches n.exc. 1.5m wide & n.exc. 1.5m in depth for foundations etc and getting out as in soft / loose soil complete all as specified & directed	2	162	Cum
3	3	M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified & directed	3	18	Cum
4	4	Earth Filling under the floors using approved excavated soil including watering, ramming spreading in layers not exc 25 cm thick complete all as specified & directed. (Note :- Approved Earth obtained from excavation will be used.)	4	61	Cum
5	5	M&L brick work with sub class 'B' bricks, straight or curved on plan not exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.	5	252	Cum
6	6	M&L Damp proof course to horizontal surface including necessary form wlork in cement concrete 1:2:4 type B-0, 25mm thick complete all as specified & directed	6	41	Sqm
7	7	Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m followed by polythene film 150 micron thick complete all as specified & directed	7	41	Sqm
8	8	M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified & directed	8	10	Cum
9	9	S&F MS TMT bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding withand including MS wire (annealed) n.less than 0.9 mm dia or securing with clips complete all as specified & directed	9	685	KG
10	10	S&F Mild steel TMT bars 5mm dia & over upto and including 10 mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 09mm dia or securing with clips complete all as specified & directed	10	85	KG
11	11	S&F steel work in tubular trusses including special shaped washer etc as in roof trusses (framed), trussed purlins, using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including distance pieces, cleats etc complete with & including one shop coat of zinc chromate primer (including preparation of surface) at contractor’s workshop before fabrication complete all as specified and directed.	11	915	KG
12	12	S&F steel work in tubular column, purline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.	12	2030	KG
13	13	S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. complete all as specified and directed.	13	175	KG
14	14	S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long, dia of neck exc 12 mm but not exc 20mm, length 60cm complete all as specified and directed.	14	68	KG
15	15	S&F Mild steel screw bolts (machine made) dia of neck 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.	15	20	KG
16	16	S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.	16	300	Sqm
17	17	S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutter, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.	17	25	Sqm
18	18	M&L for hardcore of gauge n exc. 63 mm, using broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.	18	23	Cum
19	19	M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base, finished fair & even to receive top layer etc complete all as specified & directed	19	8	Cum
20	20	M&L machine cut Kota stone slab 20 to 25 mm thick in flooring, laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.	20	173	Sqm
21	21	M&L 20mm thick marble work using Makarana white marble stone (table rubbed and polished) laid in pattern (10 to 15 cm wide strips between flooring) as in floor including pointing in white cement and marble dust (1:2) to match with shade of Makarana white marble shade over and including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.	21	14	Sqm
22	22	M&L 10 to 12 mm thick Makarana white Marble stone work in skirting/dado including pointing in white cement and marble dust (1:2) to match with shade of Makarana white marble shade over and including 10mm thick screed in cement mortar 1:4 complete all as specified and directed.	22	25	Sqm
23	23	M&L Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces followed by a coat of 1 to 2mm thick wall care putty with sand papering, finished even & smooth complete all as specified & directed	23	630	Sqm
24	24	M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 mixed with WPC (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and directed. (Note: Payment for providing grooves & WPC shall be made separately under respective item of this Schedule)	24	790	Sqm
25	25	M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer complete all as specified and directed.	25	630	Sqm
26	26	M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.	26	1000	RM
27	27	M&L returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soil complete all as specified & directed	27	55	Cum
28	28	Removing excavated material (any type soil/ debris) outside MoD Land and depositing where directed at a level n exc 1.5m above the starting point complete all as specified & directed	28	180	Cum
29	29	M&L machine cut kota stone slab 20 to 25mm thick in treads in one piece (length will be as per the width of staircase) laid over and including screed bed or bedding layer mortar 20mm thick in cement mortar 1:4 for laying floor finished jointed and pointed with grey cement slurry mixed with pigments to match the sheds of the slab including rubbing and mirror polishing complete all as specified and directed.	29	6.75	Sqm
30	30	M&L machine cut Makarana white marblr stone slab 18 to 20mm thick in riser in one piece (length will be as per the width of staircase) laid over and including screed bed or bedding layer mortar 15mm thick in cement mortar 1:3, jointed and pointed with white cement slurry to match the sheds of the slab including rubbing and mirror polishing complete all as specified and directed.	30	3.37	Sqm
31	31	Labour only for grooves over stair case trades complete all as specified & directed	31	15	RM
32	32	Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed	32	27	RM
33	33	M&L two coats of synthetic enamel paint over one coat of red oxide primer after necessary preparation of new steel surface over 10 cm in width or girth complete all as specified & directed	33	108	Sqm
34	34	M&L 75 mm thick PCC 1:3:6, type C-1, using (20mm graded stone aggregate) as in plinth protection/hard standing and finished the surface fair & even without using extra cement, laid in panel, including filling the joints with sand mixed with bitumen in 1:1 ratio complete all as specified and directed.	34	150	Sqm
35	35	Taking down of chowkhat or frame (without taking off shutter from frame) area exc 1.50 Sqm but n.exc 4sqm each including builder hardware fitting complete all as specified and directed.	35	30	Each
36	36	S&F aluminium anodised various section powder coated as required for Door/window/ ventilators etc (side hung/Top Hung / Sliding) including fixing and making the frames hinges to receive glass/wire gauge etc. complete including all required powder coated fittings such as peg stays, hinges type B-21 100mm long, suitable Al handle, aluminium tower bolt, rubber beading, clips, locking arrangement for shutter, sealant etc complete all as specified & directed\nNote:-(i) Aluminium door/window/ ventilators to be fixed with cadmium plated screw not less then 300 mm C to C & sealing the joints between frames & granite/kota stone with polysulphide sealant as per the manufactures instruction". \n(ii) Lock, double action floor spring, hydraulic door closer & glass pane/ Pre-laminated particle board for Door Shutter shall be paid separately.	36	1100	KG
37	37	S&F brass mortice lock 100mm 6 lever vertical type (Suitable for Aluminium door) with duplicate key and handle set complete all as specified & directed	37	40	Each
38	38	S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed	38	15	Each
39	39	S&F sheet glass 4.8 mm thick ordinary quality fixed with Aluminium beads in Sqm n. exc 0.50 Sqm in each panes complete all as specified & directed	39	24	Sqm
40	40	M&L for Prelaminated particle, board, exterior grade, prelaminated both side with decorative choice laminations 12mm thick fixed with aluminium beading to aluminium frame work frame work complete all as specified & directed	40	40	Sqm
41	41	Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.	41	2400	Sqm
42	42	Dismantling of existing GI ceiling frame complete including hangers of any dia etc complete all as specified & directed	42	2400	Sqm
43	43	S&F Gl powder coated frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.	43	2575	Sqm
44	44	S&F 4mm fully threaded MS adjustable rods (up to 1200mm length) with galvanised steel level clips, spaced at 1200mm centre to centre along main "T", adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 50mm long complete all as specified and directed.	44	2575	Sqm
45	45	S&F 15mm thick integral densified micro look edged eco friendly, bio safe anti-microbial & anti-bacterial fungae free (suitable for Hospital RH-100 product), light weight, calcium silicate false ceiling tiles plain with pin holes of approved texture of size 595x595mm, at any height, in true horizontal level, suspended on inter locking grid screws including cutting/making opening for service like diffusers, grill, light fittings, fixtures smoke detector etc wherever required of Aerolite/ Armstrong and equivalent complete all as specified and directed.	45	2575	Sqm
46	46	Fixing only as in repair ceiling board of any make & description of size 595x595mm complete all as specified & directed	46	100	Sqm
47	47	S&F Door closer, aluminium body hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified & directed	47	25	Each
48	48	All as per Srl item No 47 here-in-before but fixed as in repair	48	30	Each
49	49	M&L machine cut granite stone slab 20mm thick dressed true and square, in one length not less opening size in Door / window in jambs & cill (provided in two layers with overlap in cill & in single layer in jamb & length will be as per the length of cill & jamb of Door/windows), etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar & over & including cement screed base 20mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite slab including rubbing and mirror polishing and moulding complete all as specified & directed	49	45	Sqm
50	50	Supply only integral water proofing compound complete all as specified & directed	50	184	KG
51	51	M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed	51	270	Sqm
52	52	M&L for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified & directed. (Note :-Area of the sub structure in contact with backfill to be measured)	52	324	Sqm
53	53	M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & directed	53	175	Sqm
54	54	M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed	54	130	Sqm
55	55	M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & directed	55	200	RM