Construction Of Modern Record Room In Tehsil Building At Bali
Tender Value
16.10 Lakhs
Estimated cost
Bid Submission
02 Feb 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bali → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Modern Record Room In Tehsil Building At Bali
BOQ
| Name of Work: Construction of Modern Record Room in Tehsil Building at Bali | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils | BI01010001010000000000000515BI0100001113 | 101.17 | cum |
| 2 | 2 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001114 | 35.55 | cum |
| 3 | 3 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in :Cement Mortar 1:6 (1-Cement:6-Sand). | BI01010001010000000000000515BI0100001115 | 73.47 | cum |
| 4 | 4 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level :1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 3.29 | cum |
| 5 | 5 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in :Cement Mortar 1:6 (1-Cement:6-Sand). | BI01010001010000000000000515BI0100001117 | 50.32 | cum |
| 6 | 6 | Extra for facing as per design and detailed specifications including additional cost of stones over item No. 6.1 & 6.2 for :Course rubble facing First Sort. | BI01010001010000000000000515BI0100001118 | 158.69 | Sqm |
| 7 | 7 | Add extra for rock facing using Jodhpur white sand stone with porper projection and chisal dressing of edges of stone 2 line dressing for building corners,jambs including uniform joints. | BI01010001010000000000000515BI0100001119 | 164.27 | Sqm |
| 8 | 8 | Pillar masonry including bed plates as per specifications. Bed plate to be paid separately. | BI01010001010000000000000515BI0100001120 | 3.57 | cum |
| 9 | 9 | Brick work in partition in super structure up to third storey 7 Cm. thick (brick on edges) using bricks of class designation 75 with nominal hoop rainforcement (2 Nos 6mm MS bar) at every fourth course inCement mortar 1:4 (1-Cement:4-coarse sand). | BI01010001010000000000000515BI0100001121 | 23.23 | Sqm |
| 10 | 10 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement:1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001122 | 23.47 | cum |
| 11 | 11 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. \n('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Tremo Mechanically treated bars | BI01010001010000000000000515BI0100001123 | 2943.6 | Kg |
| 12 | 12 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. | BI01010001010000000000000515BI0100001124 | 200 | Kg. |
| 13 | 13 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. | BI01010001010000000000000515BI0100001125 | 16.5 | Sqm |
| 14 | 14 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for:Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. | BI01010001010000000000000515BI0100001126 | 121.28 | Sqm |
| 15 | 15 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 25 mm thick. | BI01010001010000000000000515BI0100001127 | 137.55 | Sqm |
| 16 | 16 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001128 | 137.55 | Sqm |
| 17 | 17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer. | BI01010001010000000000000515BI0100001129 | 137.55 | Sqm |
| 18 | 18 | Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) :Deep grooved pointing | BI01010001010000000000000515BI0100001130 | 164.27 | Sqm |
| 19 | 19 | Supply & fixing of steel window made out 100x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineer's incharge ground floor/ first floor.\nSize of Window 5'-6\"x6' = 33.00 Sqft.\n or 3.07 Sqm.Hollow metal pressed section (75x40 mm) of 16 gauge | BI01010001010000000000000515BI0100001131 | 10.46 | Sqm |
| 20 | 20 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Decorative Teak veener both side35 mm thick Annexure ‘A’ | BI01010001010000000000000515BI0100001132 | 3.95 | Sqm |
| 21 | 21 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For Fixed portion For Fixed portion | BI01010001010000000000000515BI0100001133 | 220 | kg |
| 22 | 22 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately). | BI01010001010000000000000515BI0100001134 | 200 | kg |
| 23 | 23 | Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on both side. | BI01010001010000000000000515BI0100001135 | 22.3 | Sqm |
| 24 | 24 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.)with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 | BI01010001010000000000000515BI0100001136 | 18.59 | Sqm |
| 25 | 25 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).With 100 mm opening when closed. | BI01010001010000000000000515BI0100001137 | 4.74 | Sqm |
| 26 | 26 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 901 to 2000 Sq. Cm :(B) 30 mm thick slab. | BI01010001010000000000000515BI0100001138 | 89.68 | Sqm |
| 27 | 27 | Providing and fixing Polyvinyl Chloride sheet / P.V.C. tile (with backing of Hessian cloth or other woven fabric flooring using rubber base adhesives including rolling with light wooden roller complete :2.0 mm thick sheet. | BI01010001010000000000000515BI0100001139 | 89.68 | Sqm |
| 28 | 28 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South Zed Black Up to 1500 Cm2 Tiles | BI01010001010000000000000515BI0100001140 | 13.59 | Sqm |
| 29 | 29 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work. | BI01010001010000000000000515BI0100001141 | 12.2 | Mtr |
| 30 | 30 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. | BI01010001010000000000000515BI0100001142 | 51.45 | Mtr |
| 31 | 31 | Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001143 | 7.96 | cum |
| 32 | 32 | P&L glazded tiles pieces for roof treatment having colour and shade as approved by the engineer in charge over 20mm thick under layer of cement mortar mix 1:4 with application of cement slurry incl. finishing of joints with white cement and pigment matching the shade curing etc. complete in all respect. | BI01010001010000000000000515BI0100001144 | 89.78 | Sqm |
| 33 | 33 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. | BI01010001010000000000000515BI0100001145 | 50.61 | cum |
| 34 | 34 | Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingles sand. | BI01010001010000000000000515BI0100001146 | 38.22 | cum |
| 35 | 35 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete :50 mm thick with 20 mm thick nominal size aggregate. | BI01010001010000000000000515BI0100001147 | 6.69 | Sqm |
| 36 | 36 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :20 mm. | BI01010001010000000000000515BI0100001148 | 12.8 | Mtr |
| 37 | 37 | S & F of curtain valvet cloth of superior quality, as approved by Engineer incharge | BI01010001010000000000000515BI0100001149 | 19.52 | Sqm |
| 38 | 38 | Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges:Kota stone 25 to 30 mm thick. | BI01010001010000000000000515BI0100001150 | 27.88 | Sqm |
| 39 | 39 | Providing and fixing acoustic false ceiling 13mm thick. As per design with white powder coated zincoliur metal section frame work including wall angle 24x24x 3.5mm to be fixed on the wall & ceiling section made of main runner of 12' length of size 24 x 32.7 x 3.5 mm at 1200mm c/c with cross runner of 600 x 1200 mm c/c the frame work should be suspended by means 3mm soft galvanised suspension circular, rod, clip & rod bracket from the existing ceiling by means of M.S. rawl plug of 12.5 mm dia x 35mm with 6mm dia bolt screw at 1200 mm/cc. The perforated bold band boutique & vinyle laminated tiles made up of gypsum with synthetic fibres of 4' x 2' or 2' x 2' size should be fixed in the suspended frame work as per design & drawing complete in all respect as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001151 | 83.64 | Sqm |
| 40 | 40 | P&F looking mirrors with PVC frame of approved (atul/equivalent)Round 500mm dia | BI01010001010000000000000515BI0100001152 | 2 | Nos |
| 41 | 41 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant .110 mm | BI01010001010000000000000515BI0100001153 | 40 | Mtr |
| 42 | 42 | Supply of “ Computer Table” of Modular nature having all the necessary arrangement for keyboard, CPU, UPS, Printer and wire manager Table Top : The table top of size 900 x 600mm(WxD) would be made out of post formed on 25 mm thick particle board with 0.7mm thick Carvica sheet in half round post formed finish on the front and rear side, matching color compensating laminate fixed on the bottom side. Other two sides are edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. | BI01010001010000000000000515BI0100001154 | 6 | Nos |
AI Tender Summary
Tender Timeline
Jan 28, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender