Development Of Guchhu Pani Robbers Cave As A Tourist Place At Distt . Dehradun , Uttarakhand
Tender Value
1.27 Crore
Estimated cost
Bid Submission
19 Feb 2021
0 days left
EMD
2.55 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GUCHHU PANI DEHRADUN → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Of Guchhu Pani Robbers Cave As A Tourist Place At Distt . Dehradun , Uttarakhand
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Feb-2021 | Date Corrigendum | Date | 19-Feb-2021 |
BOQ
| Name of Work: DEVELOPMENT OF GUCHHU PANI (ROBBERS CAVE) AS A TOURIST PLACE AT DISTT. DEHRADUN, UTTARAKHAND | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in soil in Hilly Area by mechanical means Without useinng Dozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 | BI01010001010000000000000515BI0100001111 | 1691.1 | Cum |
| 2 | 2 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 | BI01010001010000000000000515BI0100001112 | 336.22 | Cum |
| 3 | 3 | P/L of stone set pavement over 2.5 cm thick bedding layer of PCC 1:2:4 which shall further be placed over 10 cm thick dry stone kharanja or crused stone base over a prepared subgrade as per drawings and technical specifications. The size of stones shall not be less than 20 cm x 20 cm and thickness of stones shall vary from 10 cm to 15 cm. The work includes filling of joints with PCC 1:2:4 as per the standard drawings and instructions of the E-I-C. | BI01010001010000000000000515BI0100001113 | 4085.99 | Sqm |
| 4 | 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, ncluding getting out the excavated soil and disposal of surplus excavated soil as irected, within a lead of 50 m. All kinds of soil. | BI01010001010000000000000515BI0100001114 | 256.08 | Cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001115 | 27.48 | Cum |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 6.48 | Cum |
| 7 | 7 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | BI01010001010000000000000515BI0100001117 | 1168.2 | Kg |
| 8 | 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001118 | 2.9 | Cum |
| 9 | 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001119 | 53.14 | Cum |
| 10 | 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : :1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001120 | 75.82 | Cum |
| 11 | 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001121 | 11.27 | Cum |
| 12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001122 | 21574.7 | kg |
| 13 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001123 | 112.66 | Sqm |
| 14 | 14 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001124 | 235.04 | Sqm |
| 15 | 15 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers | BI01010001010000000000000515BI0100001125 | 235.04 | Sqm |
| 16 | 16 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement | BI01010001010000000000000515BI0100001126 | 28 | Sqm |
| 17 | 17 | 15 mm cement plaster in 1:4 (1 cement : 4 Coarse sand) | BI01010001010000000000000515BI0100001127 | 12.6 | Sqm |
| 18 | 18 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001128 | 2037.99 | Sqm |
| 19 | 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | BI01010001010000000000000515BI0100001129 | 326.4 | Sqm |
| 20 | 20 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (1cement: 4 coarse sand) | BI01010001010000000000000515BI0100001130 | 195.84 | Sqm |
| 21 | 21 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | BI01010001010000000000000515BI0100001131 | 307.44 | Sqm |
| 22 | 22 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001132 | 7345 | kg |
| 23 | 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | BI01010001010000000000000515BI0100001133 | 212.22 | Sqm |
| 24 | 24 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: G.S. Sheet | BI01010001010000000000000515BI0100001134 | 147 | Sqm |
| 25 | 25 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001135 | 3675 | kg |
| 26 | 26 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash asteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. | BI01010001010000000000000515BI0100001136 | 43.5 | Sqm |
| 27 | 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 800x800 mm | BI01010001010000000000000515BI0100001137 | 300 | Sqm |
| 28 | 28 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001138 | 175 | Sqm |
| 29 | 29 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | BI01010001010000000000000515BI0100001139 | 35 | Rmtr |
| 30 | 30 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) | BI01010001010000000000000515BI0100001140 | 35 | Rmtr |
| 31 | 31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001141 | 719.1 | Kg |
| 32 | 32 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)\n | BI01010001010000000000000515BI0100001142 | 71.91 | Sqm |
| 33 | 33 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001143 | 2 | Nos |
| 34 | 34 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern\n | BI01010001010000000000000515BI0100001144 | 2 | Nos |
| 35 | 35 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001145 | 2 | Nos |
| 36 | 36 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) | BI01010001010000000000000515BI0100001146 | 178.2 | Sqm |
| 37 | 37 | Providing and Fixing of wooden look columns and front facia made by FRP material as per given drawing, design and specification including supply of all materials, labour, T & P etc required for proper completion of work as per direction of E/I. | BI01010001010000000000000515BI0100001147 | 87.57 | Sqm |
| 38 | 38 | Providing and fixing Counter Top wash basin :White Vitreous China Wash basin size 630x450 mm Complete in all respect. | BI01010001010000000000000515BI0100001148 | 2 | Nos |
| 39 | 39 | Supply and Installation of Electronic boom barrier, premium quality , long lasting with protective rubber band and LED light complete in all respect as per direction Engineer I/C | BI01010001010000000000000515BI0100001149 | 2 | Nos |
| 40 | 40 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm | BI01010001010000000000000515BI0100001150 | 537 | Cum |
| 41 | 41 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). | BI01010001010000000000000515BI0100001151 | 537 | Cum |
| 42 | 42 | Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001152 | 60 | Nos |
| 43 | 43 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. | BI01010001010000000000000515BI0100001153 | 10000 | Nos |
| 44 | 44 | Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001154 | 60 | Nos |
| 45 | 45 | Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001155 | 60 | Nos |
| 46 | 46 | Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914 | BI01010001010000000000000515BI0100001156 | 4325 | Sqm |
| 47 | 47 | Supplying and stacking at site.53 mm to 22.4 mm size stone aggregate | BI01010001010000000000000515BI0100001157 | 15.56 | Cum |
| 48 | 48 | P/F of stone benches 2 ft x 6 ft with transportation and taxes complete | BI01010001010000000000000515BI0100001158 | 10 | Nos |
| 49 | 49 | Supply & Installation of Slide 12’\n35x5 Angle, 18 Gauge Sheet & Pipe, Appx Dimension – 14’(L)x2’(W)x7’(H) complete in all respect | BI01010001010000000000000515BI0100001159 | 1 | No |
| 50 | 50 | Supply & Installation Swing A Shaft 2 Seater\n2’’ Pipe 18 Gauge with 6’’ Patti Support, Appx Dimension – 9’(W)x6’(H)\ncomplete in all respect | BI01010001010000000000000515BI0100001160 | 1 | No |
| 51 | 51 | Supply & Installation Sea Shaw\n2’’ Pipe 18 Gauge & 1 soot chain, Appx Dimension – 9’x5’ complete in all respect | BI01010001010000000000000515BI0100001161 | 1 | No |
| 52 | 52 | Supply & Installation Revolving Platform\n18 Gauge Sheet, Appx Dimension – 4’ Square complete in all respect | BI01010001010000000000000515BI0100001162 | 1 | No |
| 53 | 53 | Supply & Installation Rainbow Climber\n2’’ & 1’’ Sq Pipe 18 Gauge, Appx Dimension – 9’x2’ complete in all respect | BI01010001010000000000000515BI0100001163 | 1 | No |
| 54 | 54 | Selfie Walls including painting, use of waste materials etc as per Architectural designs complete in all respect | BI01010001010000000000000515BI0100001164 | 78 | Sqft |
| 55 | 55 | Providing and fixing of FRP Designer Dustbin 100 Ltr. Capacity complete in all respect | BI01010001010000000000000515BI0100001165 | 10 | No |
AI Tender Summary
Tender Timeline
Feb 17, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 19, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender