| 1 | 1 | od6002/2020_2021 : Supply, Installation, Testing and commissioning of factory built floor mounted horizontal / vertical air handling units made of 25 mm thick panels consisting of pre plasticized G.I casing of thickness 0.8 mm outside layer and 0.8 mm inside layer with polyurethane foam ( PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower of 125mm Hg static pressure as required, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5 mm ) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor suitable for 415 +/- 10% volts, 50 Hz, 3 Phase AC supply, drain connections, stainless steel (18 G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges ( 2 nos.) and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.AHU Units of of 4000CFM, 5.5 TR, Heating capacity 6KW with pre, fine filters | BI01010001010000000000000515BI0100001114 | 1 | set |
|---|
| 2 | 2 | od6004/2020_2021 : Supply, Installation, Testing and commissioning of 5.5 TR Air conditioner outdoor with scrollcompressor R- 410 A | BI01010001010000000000000515BI0100001115 | 1 | set |
|---|
| 3 | 3 | od6006/2020_2021 : Supply & Installation of OT Plenum as per below size, SS-304casing, 16 Gauge, Filter efficiency 99.9997% down to 0.3Micron, Garde H-14, Filter Media microfiber glass paper, SS -304perforrated sheet.Plenum size: 2400mm x 1500mm x 450mm | BI01010001010000000000000515BI0100001116 | 1 | set |
|---|
| 4 | 4 | 16.12.2.1 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.63 mm thick | BI01010001010000000000000515BI0100001117 | 25 | metre |
|---|
| 5 | 5 | 16.12.2.2 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.8. mm thick | BI01010001010000000000000515BI0100001118 | 15 | metre |
|---|
| 6 | 6 | 16.23.1 : Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class \"O\") insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.Nitrile rubber insulation - 25 mm | BI01010001010000000000000515BI0100001119 | 40 | metre |
|---|
| 7 | 7 | 16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper | BI01010001010000000000000515BI0100001120 | 2 | metre |
|---|
| 8 | 8 | od6084/2020_2021 : Supply and providing the following size hard drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using nitrile rubber tubular insulation, brazing, leak testing etc.:- 7/8 inch (22.225 mm) and 1/2 inch (12.7 mm) 22 gauge | BI01010001010000000000000515BI0100001121 | 10 | metre |
|---|
| 9 | 9 | od6180/2020_2021 : Supply and providing Expansion Valves & Driers | BI01010001010000000000000515BI0100001122 | 1 | each |
|---|
| 10 | 10 | od6182/2020_2021 : Supply and providing dedicated Panel box of PCB control Board with remote, Contactor, SPP and accessories | BI01010001010000000000000515BI0100001123 | 1 | each |
|---|
| 11 | 11 | od6184/2020_2021 : Supply and providing UV lamp (60 cm) & accessories | BI01010001010000000000000515BI0100001124 | 1 | each |
|---|
| 12 | 12 | od6186/2020_2021 : Supply and providing Air Heater with humidistat &accessories | BI01010001010000000000000515BI0100001125 | 1 | each |
|---|
| 13 | 13 | 90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm | BI01010001010000000000000515BI0100001126 | 10 | metre |
|---|
| 14 | 14 | 90.6.5.21 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 6.00 sq mm | BI01010001010000000000000515BI0100001127 | 5 | metre |
|---|
| 15 | 15 | od6210/2020_2021 : Supply and providing 25mm/nearest size pipe complete with standard accessories as drain pipe etc. as required. | BI01010001010000000000000515BI0100001128 | 5 | per metre |
|---|
| 16 | 16 | od6222/2020_2021 : Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for out door stands and hanging arrangement for duct and unit made out of suitable size channel sections, slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required. | BI01010001010000000000000515BI0100001129 | 150 | kg |
|---|