Electrification Work For Mango Pulp Making Unit Electrification Work For Mango Pulp Making Unit Of Kerala Agro Fruit Products At Punalur , Kollam, Punalur Kollam-Kerala

TDR : 26741663

Tender Notice
BOQ

Expired

Punalur Kollam , Kerala

Tender Brief : Electrification Work For Mango Pulp Making Unit Electrification Work For Mango Pulp Making Unit Of Kerala Agro Fruit Products At Punalur , Kollam

Document Fees
₹ 5900 /-

EMD
₹ 35000.0 /-

Tender Value
Refer document

Submission Date
03-02-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work:ELECTRIFICATION WORK FOR MANGO PULP MAKING UNIT OF KERALA AGRO FRUIT PRODUCTS AT PUNALUR , KOLLAM
1	1	H.T CABLE
2	1.01	Supply And Laying of 1 no. XLPE power cable with conductors of best conductivity aluminium conforming to relevant ISS,11KV grade of the following sizes in the ground including excavation of trench of size 35x100cm,sand cushioning up to a height of 25 cm, providing protective covering with country burnt bricks laid breadth wise\nrefilling the trench etc as required.(Excluding all civil works and materials.) 3x150sq.mm.	item1	30	M
3	1.02	Supply and Laying of one number of following X.L.P.E power cable with conductors of best conductivity Aluminium confirming to relevent ISS, in duct / trench / tray etc. as required.3x150sq.mm.	item2	15	M
4	2	H.T CABLE TERMINATION Supply and Making INDOOR/ OUTDOOR end terminations for 11kV grade X.L.P.E cables of the following size including supply of heat shrinkable type end sealing kit of approved make and quality with all required accessories etc. as required.Conforming for IEEE 48- 1990 or IS:13573\nMake:polyzeal/Rachem
5	2.01	Indoor3Cx150sq.mm	item4	1	EACH
6	2.02	Outdoor3Cx150sq.mm	item5	1	EACH
7	3	UNITISED SUBSTATION
8	3.01	Supply installation, testing and commissioning of 200kVA outdoor Unitized Substation consisting of the following ,11KV, high voltage panel board comprising of 1 No. Load break switch of 630Amps capacity.The panel shall be of 350MVA rupturing capacity at 11KV, 13kA 630A HT load break switch fuse unit with CT/PT for meeting .Aluminium bus bar with heat shrinkable insulation and support insulators(DMC/FRP)-1 set Mechanical and Electrical on/off indication( mechanical interlock shall be formed between panel cover of HT live parts of transformer and LBS) 11KV 20A HT HRC fuse- 3Nos and seal off bushings 3 Nos, 230V AC SHUNT TRIP- 1NO, SPACE HEATER- 1SET Earthing switch interlocked with Main switch 200KVA 11KV/433V Delta/star connected Dry cast resin copper wound outdoor transformer connected with L.B.SFU. on primary side, cable entry box suitable for connecting 1Rx3 ½ x300sq.mm AYFY aluminium cable on secondary side, with all standard accessories as per IS 11171 complete as per specifications, drawings and in conformity with requirement of kerala state Electrical Inspectorate and KSEB.	item7	1	EACH
9	3.02	Supply and fixing of Emergency push button	item8	1	EACH
10	3.03	Supply and Installation of 11kV/110V TOD meter for KSEB in HT LBS duly tested in TMR, including testing of CT and PT units complete as required (excluding all statutory fees). Make: L&T/Sockomae	item9	1	EACH
11	4	SAFETY EQUIPMENTS
12	4.01	Supply & Installation of 4 kg. Dry chemical powder type fire extinguisher as per regulations.	item11	10	EACH
13	4.02	Supply & Installation of 1 nos of 9 liter fire bucket with \nstand.	item12	4	EACH
14	4.03	Supply & Laying of 1.1kV Grade, 6mm - thick rubber mat of 1m wide x 2 m long.	item13	6	EACH
15	4.04	Supply & Laying of 1.1kV Grade, 12mm - thick rubber mat of 1m wide x 2 m long.	item14	1	EACH
16	4.05	Supply & Fixing of metallic MV voltage danger notice board 200mmx\n150mm	item15	4	EACH
17	4.06	Supply & Fixing of metallic high voltage danger notice board 300mmx200mm	item16	4	EACH
18	4.07	Supply & Fixing of Laminated drawings of electrical lay out and schematic drawing, shock treatment chart etc on good frame work.	item17	2	EACH
19	5	EARTHING
20	5.01	Supply and Providing plate earthing as per IS 3043 with 1200x1200x12 mm GI/CI earth plate , 50 mm GI watering pipe fixed to the earth plate with 25 x3mm cu clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 450 x 450 x 450 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top, Cu strip,all civil works and excavation and civil works )	item19	8	EACH
21	5.02	Supply, Laying / fixing of earthing conductor of GI / CU flat / wires jointing as per IS:3043 / 87 in trench walls pulling through pipes etc as required. 25x6Cu Strip	item20	60	M
22	5.03	25x3 Cu strip	item21	200	M
23	5.04	10 SWG Cu	item22	400	M
24	5.05	12 SWG Cu	item23	400	M
25	5.06	14SWG Cu	item24	400	M
26	5.07	Earth excavation and re-filling of 1m x 30cm x 70cm including laying bricks and sand	item25	30	M
27	5.08	Earth excavation and re-filling of 1m x 20cm x 40cm	item26	200	M
28	5.09	Supply , laying and joining of DWC made of HDPE for \nmechancical protection to the power cables 50/38mm	item27	70	M
29	5.1	Supply , laying and joining of DWC made of HDPE for \nmechancical protection to the power cables 110/94mm	item28	50	M
30	6	PANEL
31	6.01	MSB ( MCCB incomer) Supply Unloading, leading, supplying, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 1.6 mm thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel.All opening parts of the panel shall be sealable. Provision for emergency push button shall be given as per statutory requirement.Incoming Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC.400A, 415V best conductivity Al TPN bus bar with SMC \nsupports, heat shrinkable sleeves etc complete as required.Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A, 4 pole, isolator-1nos (bus coupler) DG1 main : I- 250A 4P ISO - 1 no:S DG2 main : I- 200A 4P ISO- 1 no:S Outgoings Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -2no:s Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL-3no:s Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 4 pole, isolator-1 nos 200A Switch Dummy Space – 2Nos. Metering Instruments Supply and installation of three phase multifunction meter\nto read V,A and F accuracy class 0.5 CT CL 0.5 15VA -4 Nos RYB phase indicating lamps (lamps shall be of LED) with control fuses - 1 set.(22.50mm cutout dimension) Pf meter, control fuses and neutral links. AMF Relay with 320A 4P contactor -2 Nos, \n200A 4P contractor-1Nos, 250A 4P contractor -1Nos, 320A 4P contractor -2Nos\netc., complete	item30	1	EACH
32	6.02	APFC PANEL Supply, Erection, testing and commissioning of 60KVAR APFC PANEL Incoming 160A 3P MCCB 25KA - 1no with APFC Relay outgoing 20 KVAR CAPACITOR with contactor- 1no 10 KVAR CAPACITOR with contactor- 3no 5 KVAR CAPACITOR with contactor- 2no	item31	1	EACH
33	6.03	SSB3 PANEL Unloading, leading, supplying, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 1.6 mm thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel.All opening parts of the panel shall be sealable. Provision for emergency push button shall be given as per statutory requirement Incoming Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 25 kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -1no:s outgoing Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.63A, 16kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -4no:s Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.40A, 16kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -2no:s	item32	1	EACH
34	6.04	rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.40A, 16kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL	item115	2	nos
35	7	CABLE LAYING & END TERMINATION Supply and Laying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) in cable trenches/cable tray or on concrete wall or through pipes as per specifications, etc. Necessary clamping should be provided while burying cables in prepared trenches etc. Make:Surya/Seco
36	7.01	3.5 x 300sq. mm AL Cable	item34	40	M
37	7.02	3.5 x150 sq. mm AL Cable	item35	35	M
38	7.03	3.5 x120 sq. mm AL Cable	item36	50	M
39	7.04	3.5 x 95sq. mm AL Cable	item37	120	M
40	7.05	3.5 x 70sq. mm AL Cable	item38	100	M
41	7.06	4x 25sq. mm AL Cable	item39	80	M
42	7.07	4 x 16sq. mm AL Cable	item40	70	M
43	7.08	4x 10sq. mm AL Cable	item41	50	M
44	7.09	4x 6sq. mm AL Cable	item42	50	M
45	7.1	3x 2.5sq.mm armoured CU cable	item43	60	M
46	7.11	6x 1.5sq.mm armoured CU cable	item44	30	M
47	8	TERMINATION Supply and Making end termination using siemens type / tropdur compression gland, Aluminium Lugs, earth clamps for XLPE insulated and PVC sheathed armoured conductor cable 1.1kV grade and making end terminations suitable for 2/3/3.5/4 core cables of the following sizes as required.
48	8.01	3.5 x 300sq. mm AL Cable	item46	2	NOS
49	8.02	3.5x 150sq. Mm AL Cable	item47	2	NOS
50	8.03	3.5 x120 sq. mm AL Cable	item48	2	M
51	8.04	3.5 x 95sq. mm AL Cable	item49	6	M
52	8.05	3.5 x 70sq. mm AL Cable	item50	2	NOS
53	8.06	4x 25sq. mm AL Cable	item51	4	NOS
54	8.07	4x 16sq. mm AL Cable	item52	12	NOS
55	8.08	4x 10sq. mm AL Cable	item53	10	NOS
56	8.09	4x 6sq. mm AL Cable	item54	12	NOS
57	8.1	2x 2.5sq.mm armoured AL cable	item55	10	NOS
58	8.11	12x 1.5sq.mm armoured Cu cable	item56	4	NOS
59	9	VERTICAL DISTRIBUTION BOARDS
60	9.01	Supplying, Erection, testing and commissioning of wall mounting type 3 phase 8 way Vertical DB suitable for fixing Isolator as incomer and with lockable front door of approved make and quality with cable end box (IP 43)\nMake:L&T	item58	3	EACH
61	9.02	Supplying, Erection, testing and commissioning of wall mounting type 3 phase 6 way Vertical DB suitable for fixing Isolator as incomer and with lockable front door of approved make and quality with cable end box (IP 43)	item59	2	EACH
62	10	MCCB DB
63	10.01	Supplying, Erection, testing and commissioning of wall mounting type 3 phase 8 way MCCB DB suitable for fixing Isolator as incomer and with lockable front door of approved make and quality with cable end box (IP 43)	item61	2	EACH
64	11	DISTRIBUTION BOARDS
65	11.01	Supplying and Fixing Three phase 8 way MCB DB double shuttered(IP 43), giving connections including cable entry cum gland box as required.	item63	2	EACH
66	11.02	Supplying and Fixing Three phase 4 way MCB DB double shuttered(IP 43), giving connections including cable entry cum gland box as required.	item64	1	EACH
67	12	MCCB
68	12.01	Supplying and Fixing of 100A 4P MCCB	item66	2	EACH
69	13	RCCB Supplying and Fixing two pole/ four pole RCCB in DBs and giving connections as required
70	13.01	4 pole 40A 30 mA RCCB	item68	3	EACH
71	13.02	4 pole 63A 100 mA RCCB	item69	5	EACH
72	14	Supply and fixing of ISOLATORS
73	14.01	40A 4P ISO	item71	16	EACH
74	14.02	63A 4P ISO	item72	5	EACH
75	15	MCB Supplying and Fixing TP/DP/SP MCB in the existing enclosure and giving\nconnection as required.
76	15.01	6-32A TP MCB	item74	10	EACH
77	15.02	40-63A TP MCB	item75	60	EACH
78	15.03	6-32A SP MCB	item76	60	EACH
79	16	Supply and fixing of ENCLOSURE
80	16.01	4P Enclosure	item78	15	EACH
81	17	WIRING SYSTEM Supply and wiring using modular switches Point wiring for 230Volts A.C Circuits through ISI Medium Duty PVC conduits, 1.0 sq.mm(14/0.3)single core PVC insulated copper wire for distribution 1.5mm Copper wire for continuous earthing, 6A control switches, 6A sockets, GI mounting boxes etc. as necessary for the following items. The wiring should be done over the surface / open/ concealed type\nwith modular switches & Sockets upto 6 metres (including conduits)
82	17.01	1 No. light point controlled by 1 No 6A, SP Switch	item80	30	EACH
83	17.02	1 No. light point controlled by 2 No 6A, SP Switch	item81	2	EACH
84	17.03	1 No, Ceiling fan point along with 1 No 100W 2 module \nstep type	item82	20	EACH
85	17.04	Supplying and fixing following modular switch & socket on the existing modular plate & switch box including connections but excluding modular plate etc.s required.5/6 amps switch & socket (combined)	item83	10	EACH
86	17.05	Supplying and fixing following modular switch&socket on connections including modular plate etc. as required.5/6 amps switch & socket at independent position	item84	10	EACH
87	17.06	Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp switch	item85	10	EACH
88	17.07	Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet	item86	10	EACH
89	18	CIRCUIT & POWER POINT WIRING Supply & laying and Termination of PVC Insulated copper wires through existing ISI Medium Duty PVC conduits for the following type of wiring
90	18.01	Circuit mains wiring using 2 runs of 1.5 sq.mm PVC insulated copper wires	item88	100	Mts
91	18.02	Circuit mains wiring using 2 runs of 2.5 sq.mm PVC insulated copper wires	item89	150	Mts
92	18.03	Circuit mains wiring using 4 runs of 2.5 sq.mm PVC insulated copper wires	item90	150	Mts
93	18.04	Circuit mains wiring using 2 runs of 4 sq.mm PVC insulated copper wires	item91	50	Mts
94	18.05	Circuit mains wiring using 4 runs of 4 sq.mm PVC insulated copper wires	item92	100	Mts
95	18.06	Circuit mains wiring using 4 runs of 6 sq.mm PVC insulated copper wires	item93	100	Mts
96	19	CONDUIT Supplying and laying of electrical grade ISI medium grade rigid PVC open conduits in wall, floor etc., complete with necessary accessories . Junction boxes etc should be provided
97	19.01	20 MM PVC Pipe	item95	300	Mts
98	19.02	25 MM PVC Pipe	item96	200	Mts
99	20	LIGHTING FIXTURES/OTHER FIXTURES Supplying and Installation of the following outdoor/indoor type light fittings,including supply of all materials required for erection,all wiring,terminations and interconnections,earthing from the terminal block/ceiling rose to the light fitting/luminaries.All minor civil works such as chasing,foundations etc.shall be under the scope of the Contractor
100	20.01	1x20W LED Surface mounted box type fittings with tube	item98	20	NOS
101	20.02	1X40/45W LED street light	item99	15	NOS
102	21	CEILING/ EXHAUST FAN
103	21.02	Supply and Installation of old 5 Star rating ceiling fan make havells or crompton with all connections	item101	20	EACH
104	21.03	Supply Installation of 450mm exhaust fan with all connections	item102	10	EACH
105	22	CABLE TRAY
106	22.01	Supply and Erection of vertical and horizontal type cable trays and cable supports fabricated out of MS angles (ISA) and MS flats with sufficient width and spacing between successive cross members and supported at adequate spacing. The design of cable trays and details shall be approved by the department officers / consultant	item104	150	KG
107	23	Preparation of all drawings submitting and getting approval from Electrical Inspectorate, submitting of Completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate .	item107	1	LS
108	24	Preparation of all documents to KSEB, obtaining power allocation & power connection etc. for commissioning of the whole installation in the premises. All statutory payments will be extra( paid by client.)(Soil test,TMR division, KSEB division and circle,electrical inspectorate chief and district etc comple)	item108	1	LS

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Kerala Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Electrification Work For Mango Pulp Making Unit Electrification Work For Mango Pulp Making Unit Of Kerala Agro Fruit Products At Punalur , Kollam, Punalur Kollam-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work:ELECTRIFICATION WORK FOR MANGO PULP MAKING UNIT OF KERALA AGRO FRUIT PRODUCTS AT PUNALUR , KOLLAM
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	H.T CABLE
2	1.01	Supply And Laying of 1 no. XLPE power cable with conductors of best conductivity aluminium conforming to relevant ISS,11KV grade of the following sizes in the ground including excavation of trench of size 35x100cm,sand cushioning up to a height of 25 cm, providing protective covering with country burnt bricks laid breadth wise\nrefilling the trench etc as required.(Excluding all civil works and materials.) 3x150sq.mm.	item1	30	M
3	1.02	Supply and Laying of one number of following X.L.P.E power cable with conductors of best conductivity Aluminium confirming to relevent ISS, in duct / trench / tray etc. as required.3x150sq.mm.	item2	15	M
4	2	H.T CABLE TERMINATION Supply and Making INDOOR/ OUTDOOR end terminations for 11kV grade X.L.P.E cables of the following size including supply of heat shrinkable type end sealing kit of approved make and quality with all required accessories etc. as required.Conforming for IEEE 48- 1990 or IS:13573\nMake:polyzeal/Rachem
5	2.01	Indoor3Cx150sq.mm	item4	1	EACH
6	2.02	Outdoor3Cx150sq.mm	item5	1	EACH
7	3	UNITISED SUBSTATION
8	3.01	Supply installation, testing and commissioning of 200kVA outdoor Unitized Substation consisting of the following ,11KV, high voltage panel board comprising of 1 No. Load break switch of 630Amps capacity.The panel shall be of 350MVA rupturing capacity at 11KV, 13kA 630A HT load break switch fuse unit with CT/PT for meeting .Aluminium bus bar with heat shrinkable insulation and support insulators(DMC/FRP)-1 set Mechanical and Electrical on/off indication( mechanical interlock shall be formed between panel cover of HT live parts of transformer and LBS) 11KV 20A HT HRC fuse- 3Nos and seal off bushings 3 Nos, 230V AC SHUNT TRIP- 1NO, SPACE HEATER- 1SET Earthing switch interlocked with Main switch 200KVA 11KV/433V Delta/star connected Dry cast resin copper wound outdoor transformer connected with L.B.SFU. on primary side, cable entry box suitable for connecting 1Rx3 ½ x300sq.mm AYFY aluminium cable on secondary side, with all standard accessories as per IS 11171 complete as per specifications, drawings and in conformity with requirement of kerala state Electrical Inspectorate and KSEB.	item7	1	EACH
9	3.02	Supply and fixing of Emergency push button	item8	1	EACH
10	3.03	Supply and Installation of 11kV/110V TOD meter for KSEB in HT LBS duly tested in TMR, including testing of CT and PT units complete as required (excluding all statutory fees). Make: L&T/Sockomae	item9	1	EACH
11	4	SAFETY EQUIPMENTS
12	4.01	Supply & Installation of 4 kg. Dry chemical powder type fire extinguisher as per regulations.	item11	10	EACH
13	4.02	Supply & Installation of 1 nos of 9 liter fire bucket with \nstand.	item12	4	EACH
14	4.03	Supply & Laying of 1.1kV Grade, 6mm - thick rubber mat of 1m wide x 2 m long.	item13	6	EACH
15	4.04	Supply & Laying of 1.1kV Grade, 12mm - thick rubber mat of 1m wide x 2 m long.	item14	1	EACH
16	4.05	Supply & Fixing of metallic MV voltage danger notice board 200mmx\n150mm	item15	4	EACH
17	4.06	Supply & Fixing of metallic high voltage danger notice board 300mmx200mm	item16	4	EACH
18	4.07	Supply & Fixing of Laminated drawings of electrical lay out and schematic drawing, shock treatment chart etc on good frame work.	item17	2	EACH
19	5	EARTHING
20	5.01	Supply and Providing plate earthing as per IS 3043 with 1200x1200x12 mm GI/CI earth plate , 50 mm GI watering pipe fixed to the earth plate with 25 x3mm cu clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 450 x 450 x 450 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top, Cu strip,all civil works and excavation and civil works )	item19	8	EACH
21	5.02	Supply, Laying / fixing of earthing conductor of GI / CU flat / wires jointing as per IS:3043 / 87 in trench walls pulling through pipes etc as required. 25x6Cu Strip	item20	60	M
22	5.03	25x3 Cu strip	item21	200	M
23	5.04	10 SWG Cu	item22	400	M
24	5.05	12 SWG Cu	item23	400	M
25	5.06	14SWG Cu	item24	400	M
26	5.07	Earth excavation and re-filling of 1m x 30cm x 70cm including laying bricks and sand	item25	30	M
27	5.08	Earth excavation and re-filling of 1m x 20cm x 40cm	item26	200	M
28	5.09	Supply , laying and joining of DWC made of HDPE for \nmechancical protection to the power cables 50/38mm	item27	70	M
29	5.1	Supply , laying and joining of DWC made of HDPE for \nmechancical protection to the power cables 110/94mm	item28	50	M
30	6	PANEL
31	6.01	MSB ( MCCB incomer) Supply Unloading, leading, supplying, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 1.6 mm thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel.All opening parts of the panel shall be sealable. Provision for emergency push button shall be given as per statutory requirement.Incoming Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC.400A, 415V best conductivity Al TPN bus bar with SMC \nsupports, heat shrinkable sleeves etc complete as required.Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A, 4 pole, isolator-1nos (bus coupler) DG1 main : I- 250A 4P ISO - 1 no:S DG2 main : I- 200A 4P ISO- 1 no:S Outgoings Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -2no:s Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL-3no:s Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 4 pole, isolator-1 nos 200A Switch Dummy Space – 2Nos. Metering Instruments Supply and installation of three phase multifunction meter\nto read V,A and F accuracy class 0.5 CT CL 0.5 15VA -4 Nos RYB phase indicating lamps (lamps shall be of LED) with control fuses - 1 set.(22.50mm cutout dimension) Pf meter, control fuses and neutral links. AMF Relay with 320A 4P contactor -2 Nos, \n200A 4P contractor-1Nos, 250A 4P contractor -1Nos, 320A 4P contractor -2Nos\netc., complete	item30	1	EACH
32	6.02	APFC PANEL Supply, Erection, testing and commissioning of 60KVAR APFC PANEL Incoming 160A 3P MCCB 25KA - 1no with APFC Relay outgoing 20 KVAR CAPACITOR with contactor- 1no 10 KVAR CAPACITOR with contactor- 3no 5 KVAR CAPACITOR with contactor- 2no	item31	1	EACH
33	6.03	SSB3 PANEL Unloading, leading, supplying, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 1.6 mm thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel.All opening parts of the panel shall be sealable. Provision for emergency push button shall be given as per statutory requirement Incoming Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 25 kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -1no:s outgoing Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.63A, 16kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -4no:s Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.40A, 16kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL -2no:s	item32	1	EACH
34	6.04	rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.40A, 16kA (Ics=100%Icu), 3pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL	item115	2	nos
35	7	CABLE LAYING & END TERMINATION Supply and Laying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) in cable trenches/cable tray or on concrete wall or through pipes as per specifications, etc. Necessary clamping should be provided while burying cables in prepared trenches etc. Make:Surya/Seco
36	7.01	3.5 x 300sq. mm AL Cable	item34	40	M
37	7.02	3.5 x150 sq. mm AL Cable	item35	35	M
38	7.03	3.5 x120 sq. mm AL Cable	item36	50	M
39	7.04	3.5 x 95sq. mm AL Cable	item37	120	M
40	7.05	3.5 x 70sq. mm AL Cable	item38	100	M
41	7.06	4x 25sq. mm AL Cable	item39	80	M
42	7.07	4 x 16sq. mm AL Cable	item40	70	M
43	7.08	4x 10sq. mm AL Cable	item41	50	M
44	7.09	4x 6sq. mm AL Cable	item42	50	M
45	7.1	3x 2.5sq.mm armoured CU cable	item43	60	M
46	7.11	6x 1.5sq.mm armoured CU cable	item44	30	M
47	8	TERMINATION Supply and Making end termination using siemens type / tropdur compression gland, Aluminium Lugs, earth clamps for XLPE insulated and PVC sheathed armoured conductor cable 1.1kV grade and making end terminations suitable for 2/3/3.5/4 core cables of the following sizes as required.
48	8.01	3.5 x 300sq. mm AL Cable	item46	2	NOS
49	8.02	3.5x 150sq. Mm AL Cable	item47	2	NOS
50	8.03	3.5 x120 sq. mm AL Cable	item48	2	M
51	8.04	3.5 x 95sq. mm AL Cable	item49	6	M
52	8.05	3.5 x 70sq. mm AL Cable	item50	2	NOS
53	8.06	4x 25sq. mm AL Cable	item51	4	NOS
54	8.07	4x 16sq. mm AL Cable	item52	12	NOS
55	8.08	4x 10sq. mm AL Cable	item53	10	NOS
56	8.09	4x 6sq. mm AL Cable	item54	12	NOS
57	8.1	2x 2.5sq.mm armoured AL cable	item55	10	NOS
58	8.11	12x 1.5sq.mm armoured Cu cable	item56	4	NOS
59	9	VERTICAL DISTRIBUTION BOARDS
60	9.01	Supplying, Erection, testing and commissioning of wall mounting type 3 phase 8 way Vertical DB suitable for fixing Isolator as incomer and with lockable front door of approved make and quality with cable end box (IP 43)\nMake:L&T	item58	3	EACH
61	9.02	Supplying, Erection, testing and commissioning of wall mounting type 3 phase 6 way Vertical DB suitable for fixing Isolator as incomer and with lockable front door of approved make and quality with cable end box (IP 43)	item59	2	EACH
62	10	MCCB DB
63	10.01	Supplying, Erection, testing and commissioning of wall mounting type 3 phase 8 way MCCB DB suitable for fixing Isolator as incomer and with lockable front door of approved make and quality with cable end box (IP 43)	item61	2	EACH
64	11	DISTRIBUTION BOARDS
65	11.01	Supplying and Fixing Three phase 8 way MCB DB double shuttered(IP 43), giving connections including cable entry cum gland box as required.	item63	2	EACH
66	11.02	Supplying and Fixing Three phase 4 way MCB DB double shuttered(IP 43), giving connections including cable entry cum gland box as required.	item64	1	EACH
67	12	MCCB
68	12.01	Supplying and Fixing of 100A 4P MCCB	item66	2	EACH
69	13	RCCB Supplying and Fixing two pole/ four pole RCCB in DBs and giving connections as required
70	13.01	4 pole 40A 30 mA RCCB	item68	3	EACH
71	13.02	4 pole 63A 100 mA RCCB	item69	5	EACH
72	14	Supply and fixing of ISOLATORS
73	14.01	40A 4P ISO	item71	16	EACH
74	14.02	63A 4P ISO	item72	5	EACH
75	15	MCB Supplying and Fixing TP/DP/SP MCB in the existing enclosure and giving\nconnection as required.
76	15.01	6-32A TP MCB	item74	10	EACH
77	15.02	40-63A TP MCB	item75	60	EACH
78	15.03	6-32A SP MCB	item76	60	EACH
79	16	Supply and fixing of ENCLOSURE
80	16.01	4P Enclosure	item78	15	EACH
81	17	WIRING SYSTEM Supply and wiring using modular switches Point wiring for 230Volts A.C Circuits through ISI Medium Duty PVC conduits, 1.0 sq.mm(14/0.3)single core PVC insulated copper wire for distribution 1.5mm Copper wire for continuous earthing, 6A control switches, 6A sockets, GI mounting boxes etc. as necessary for the following items. The wiring should be done over the surface / open/ concealed type\nwith modular switches & Sockets upto 6 metres (including conduits)
82	17.01	1 No. light point controlled by 1 No 6A, SP Switch	item80	30	EACH
83	17.02	1 No. light point controlled by 2 No 6A, SP Switch	item81	2	EACH
84	17.03	1 No, Ceiling fan point along with 1 No 100W 2 module \nstep type	item82	20	EACH
85	17.04	Supplying and fixing following modular switch & socket on the existing modular plate & switch box including connections but excluding modular plate etc.s required.5/6 amps switch & socket (combined)	item83	10	EACH
86	17.05	Supplying and fixing following modular switch&socket on connections including modular plate etc. as required.5/6 amps switch & socket at independent position	item84	10	EACH
87	17.06	Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp switch	item85	10	EACH
88	17.07	Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet	item86	10	EACH
89	18	CIRCUIT & POWER POINT WIRING Supply & laying and Termination of PVC Insulated copper wires through existing ISI Medium Duty PVC conduits for the following type of wiring
90	18.01	Circuit mains wiring using 2 runs of 1.5 sq.mm PVC insulated copper wires	item88	100	Mts
91	18.02	Circuit mains wiring using 2 runs of 2.5 sq.mm PVC insulated copper wires	item89	150	Mts
92	18.03	Circuit mains wiring using 4 runs of 2.5 sq.mm PVC insulated copper wires	item90	150	Mts
93	18.04	Circuit mains wiring using 2 runs of 4 sq.mm PVC insulated copper wires	item91	50	Mts
94	18.05	Circuit mains wiring using 4 runs of 4 sq.mm PVC insulated copper wires	item92	100	Mts
95	18.06	Circuit mains wiring using 4 runs of 6 sq.mm PVC insulated copper wires	item93	100	Mts
96	19	CONDUIT Supplying and laying of electrical grade ISI medium grade rigid PVC open conduits in wall, floor etc., complete with necessary accessories . Junction boxes etc should be provided
97	19.01	20 MM PVC Pipe	item95	300	Mts
98	19.02	25 MM PVC Pipe	item96	200	Mts
99	20	LIGHTING FIXTURES/OTHER FIXTURES Supplying and Installation of the following outdoor/indoor type light fittings,including supply of all materials required for erection,all wiring,terminations and interconnections,earthing from the terminal block/ceiling rose to the light fitting/luminaries.All minor civil works such as chasing,foundations etc.shall be under the scope of the Contractor
100	20.01	1x20W LED Surface mounted box type fittings with tube	item98	20	NOS
101	20.02	1X40/45W LED street light	item99	15	NOS
102	21	CEILING/ EXHAUST FAN
103	21.02	Supply and Installation of old 5 Star rating ceiling fan make havells or crompton with all connections	item101	20	EACH
104	21.03	Supply Installation of 450mm exhaust fan with all connections	item102	10	EACH
105	22	CABLE TRAY
106	22.01	Supply and Erection of vertical and horizontal type cable trays and cable supports fabricated out of MS angles (ISA) and MS flats with sufficient width and spacing between successive cross members and supported at adequate spacing. The design of cable trays and details shall be approved by the department officers / consultant	item104	150	KG
107	23	Preparation of all drawings submitting and getting approval from Electrical Inspectorate, submitting of Completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate .	item107	1	LS
108	24	Preparation of all documents to KSEB, obtaining power allocation & power connection etc. for commissioning of the whole installation in the premises. All statutory payments will be extra( paid by client.)(Soil test,TMR division, KSEB division and circle,electrical inspectorate chief and district etc comple)	item108	1	LS

Electrification Work For Mango Pulp Making Unit Electrification Work For Mango Pulp Making Unit Of Kerala Agro Fruit Products At Punalur , Kollam, Punalur Kollam-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us