Construction Of Guest House , Boundary Wall With Design Gate , Boring With Pump Set And Earthen Galleries With Open Stage At Campus Of Dapon The Mirror At Tangla , Dist- Udalguri
Tender Value
1.99 Crore
Estimated cost
Bid Submission
03 Feb 2021
0 days left
EMD
3.99 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Auction
Location / State
Tangla → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Guest House , Boundary Wall With Design Gate , Boring With Pump Set And Earthen Galleries With Open Stage At Campus Of Dapon The Mirror At Tangla , Dist- Udalguri
BOQ
| Name of Work: Construction of Guest House, boundary wall with design gate, boring with pump set and earthen galleries with open stage at campus of Dapon the Mirror at Tangla, Dist: Udalguri | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps, septic tank etc., including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.(A) Upto a depth of 2m below the existing ground level.(b) In hard/ dense soil | item 1 | 291 | cum |
| 2 | 2 | Providing brick soling in foundation and under floor with stone/best quality picked Jhama brick, sand packed and laid to level and in panel after preparing the sub grade As directed including all lab our and materials and if necessary dewatering, complete.\n | item 2 | 792 | Sq.m. |
| 3 | 3 | Plain cement concrete works with coarse aggregate, of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete(Shuttering where necesary shall be measured and paid separately) (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item 3 | 14 | cum |
| 4 | 4 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick | item 4 | 553 | Sqm. |
| 5 | 5 | Providing and laying 25mm thick Damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture in cluding curing etc. complete as directed. | item 5 | 21 | Sq.m. |
| 6 | 6 | Providing and laying plain/reinforced cement concrete works cement with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately.)\n(i) Using mixture machine.\n(A) In sub-structure upto plinth level.Foundation, footings, columns with base, tie and plinth beam, pile cap, base, slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser,(b) M-20 or Proportion in 1:1.5:3 | item 6 | 101 | cum |
| 7 | 7 | (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder,bressumer, cantilever, staircase (except spiral stair case and landing) including preparing the top surface and finishing of nosing. (N) Without using admixture, plasticiser,(b) M-20 or Proportion in 1:1.5:3 | item 7 | 134 | cum |
| 8 | 8 | Extra over item No.2.2.1(i) (B), above for each subsequent floor or part thereof above the 1st. Floor level. | item 8 | 87 | cum |
| 9 | 9 | Providing formwork of formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. heigth of propping and centering below supporting floor to ceiling not exiding 4.0m and removal of the same for in situ reinforced concrete and plain concrete work in:Foundation, footings, base ofcolumn, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank | item 9 | 69 | Sq.m. |
| 10 | 10 | Columns, pilars, pots & Strut of quare/rectangular/polygonal in plain or any shape like Tee/L etc. Having plain vertical face.(ii) Using 25mm thick plank | item 10 | 426 | Sqm. |
| 11 | 11 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b). | item 11 | 107 | Sqm. |
| 12 | 12 | Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank | item 12 | 121 | Sqm. |
| 13 | 13 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.(a) For depth not exceeding 1.0M.(ii) Using 25mm thick plank | item 13 | 389 | Sqm. |
| 14 | 14 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b). | item 14 | 457 | Sqm. |
| 15 | 15 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200 mm in thickness.(ii) Using 25mm thick plank | item 15 | 390 | Sq.m. |
| 16 | 16 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b). | item 16 | 238 | Sq.m. |
| 17 | 17 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | item 17 | 36 | Sq.m. |
| 18 | 18 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b). | item 18 | 36 | Sq.m. |
| 19 | 19 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level)(A) From primary produccer : TATA/SAIL/Jindal steel/Shyam steel/RINL(i) TMT Corrosion resistant steel (CRS) reinforecment bar | item 19 | 273 | Qtl. |
| 20 | 20 | Extra over item 18.1.1(a,b,c) for each susequent floor or part thereof above 1st floor level. | item 20 | 111 | Qtl. |
| 21 | 21 | 230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure (i) In Sub-structure upto plinth level including dewatering if necessary.(b). In proportion 1:4. | item 21 | 133 | Sq.m. |
| 22 | 22 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.(I) In Sub-structure upto plinth level including dewatering if necessary(b) In proportion 1:4. | item 22 | 6 | cum |
| 23 | 23 | 200mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed in structure (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)(b) In Super structure above plinth level upto 1st floor level | item 23 | 178 | Sqm |
| 24 | 24 | 100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) | item 24 | 234 | Sqm |
| 25 | 25 | Extra over item no.4.3.3 (b) above for CC block work in each subsequent floor or part thereof above 1st floor level. | item 25 | 311 | Sqm |
| 26 | 26 | 15 mm thick cement plaster in single coat on single or hulf bribkwall for interior plastering upto 1st floor level including arises, internal rounded angles, not exeeding 80 mm girth and finished event and smooth including curing completed as directed.(B) On fair sidea) In cement mortar 1:3 | item 26 | 634 | Sqm |
| 27 | 27 | Extra over item no. 6.2.1 to 6.2.5 for interior plastering abobe 1st floor level for every additional floors or part thereof including curing completed as directed.(a ) On single coat plaster | item 27 | 268 | Sqm |
| 28 | 28 | 20 mm thick cement plaster in two coats, on single or hulf brick wall for interior brick up to 1st floor leve including arisers, internal rounded angles, chamfers and / or rounded angles not exeeding 80 mm in girth and finishes even and smooth including curing completyed as directed.(A) On rough side (backing coat 15 mm and finishing coat 5mm thick)a) In cement mortar 1:3 | item 28 | 634 | Sqm |
| 29 | 29 | Extra over item no. 6.2.1 to 6.2.5 for interior plastering abobe 1st floor level for every additional floors or part thereof including curing completed as directed.(a ) On single coat plaster | item 29 | 268 | Sqm |
| 30 | 30 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.(167.05+21.78)=188.8 | item 30 | 414 | Sqm. |
| 31 | 31 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | item 31 | 281 | Sqm. |
| 32 | 32 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. | item 32 | 58 | Sqm. |
| 33 | 33 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Makeii) Of size 600mmx600mm and above | item 33 | 600 | Sqm. |
| 34 | 34 | Providing Antiskid tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement : 3 coarse sand) approved make fix with Fix-A Tile (Choksey/Sika/Pedelite/Rouf) white cement complete at all leve as specificated and directed.(B) Vitrifiedii)Executive range-1 (Sizes 600 mm x 300mm and above)a) Nitco made (Oak Wood) | item 34 | 174 | Sqm |
| 35 | 35 | Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (iii) Deluxe Quality(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) | item 35 | 117 | Sq.m. |
| 36 | 36 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).iv) Of size300mmx900mm and above | item 36 | 121 | Sqm |
| 37 | 37 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to...............a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary). (Glass wool to be measured and paid separately). .(E) M/F Frame Work with Acoustic Type Slit Gypboard (Louvertone) Tiles (NRC value 0.72 with 50mm glass wool mat backing) 12.5mm thick. | item 37 | 119 | Sqm |
| 38 | 38 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood | item 38 | 1 | Cum. |
| 39 | 39 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. | item 39 | 37 | Sqm |
| 40 | 40 | Providing, fitting and fixing PVC door frame of Duroplast make DPF-5060 make suitable for DPS-3720 made from extruded PVC multichamber hollow section having dimensions of 50mmx60mm (Toletance + 1mm). Horizontal and vertical sections shall be joined by steel screws after inserting M.S. tubular rectangular galvanised L-shaped brackets of size 100mmx100mm or plastic brackets of size 75mmx75mm with metred cut at the corners. Hinge side of the frame shall be reinforced with M.S.Tubular section of size 40mmx20mm. The frame will be fixed to the column/ stiffner/ wall with the help of 3 nos 75mm long and 4mm dia steel screws and expandable fastners on each side of the door frame complete in all respects as sepcified and directed at all levels. | item 40 | 25 | Rm. |
| 41 | 41 | FRP PANNELED DOOR Supplying & fixing of factory made 30mm thick Fibreglass Reinforced Plastic (FRP) panneled door shutter of required colour of FIBREWAYS made with fire retardant grade unsatured polyster resin,moulded to 3mm thick FRP laminate for forming hollow rails and styles,with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings,cast monolithically with 5mm thick FRP laminate for panels and conforming to IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge. | item 41 | 4 | Sqm. |
| 42 | 42 | Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(b)3 Track sliding window(iii)6mm coloured glass | item 42 | 59 | Sqm. |
| 43 | 43 | Providing and fixing stainless steel (Grade 304) railing made of holle tubes, channel, plates etc. including welding, grinding, buffing, polishing nad making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.c. fixing the ailing with necessary accessaries and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab withsuitable arrangement as epr aproved of engineer incharge. (for payment only weight of stainless steel member is to be considerd. no extra for fixing accessoreis such as nuts, bolts, fasteners etc. will be considered). | item 43 | 975 | Kg. |
| 44 | 44 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | item 44 | 4.5 | Sqm. |
| 45 | 45 | Providing, fitting and fixing M.S Grill of required pattern for windows / clearstory windows / opening with M.S. flats at required spacing in frame all round, squre or round M.S bar with round headed bolts and nuts or screws.(ii) Ornamental grill.(a) Fixed to brick work / P.C.C / R.C.C. | item 45 | 940 | Kg. |
| 46 | 46 | Providing welding, fitting, fixing, hoisting and fixing of Roof Trusses with purlin, bottom runner etc. fabricated out of combination of two or all of the following sections: (i) square hollow section (SHS) (II) Rectangular section(RHS) (iii) M.S. black tube conforming to relevant I.S. code 1161 - 1986 as per approved design and drawing including M.S, cleat, base plate, bolt and buts which ever reqired, including that required fixing the ceiling and one coat of red oxide Zinc chromate primer to all steel surface etc. completed as directed as per specifications.a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | item 46 | 81.5 | Qtl. |
| 47 | 47 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement(iv) 0.60 mm thick | item 47 | 340 | Sqm. |
| 48 | 48 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement(iv) 0.60 mm thick | item 48 | 32 | Rm. |
| 49 | 49 | Providing two coats of birla white care wall putty (water resistant white based putty or concrete / mortar wall and ceiling both internal or external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistering the wall with sufficient quantity of clean water as specified and directed by the department. (total thickness of two coats is maximum 1.5mm) | item 49 | 1864 | Sqm |
| 50 | 50 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item 50 | 1864 | Sqm |
| 51 | 51 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item 51 | 1307 | Sqm |
| 52 | 52 | Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).(i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item 52 | 1307 | Sqm |
| 53 | 53 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats). | item 53 | 693 | Sqm |
| 54 | 54 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(i) Surfaces over 100mm in width or in girth.(a) Hiegh gloss (Assia paint / Berger paint / ICI paint/ J&K paint / Nerolac) | item 54 | 65 | Sqm |
| 55 | 55 | (ii).Surfaces up to 100mm in width or girth.(a) Hiegh gloss (Assia paint / Berger paint / ICI paint/ J&K paint / Nerolac) | item 55 | 740 | Rm. |
| 56 | 56 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.(b) Other than Guwahati city | item 56 | 2056 | Cu.m. |
| 57 | 57 | Earth / sand filling in plinth in layers not more than 150 mm thick including nacessary carriage, watering, ramming,etc. complite as directed and specified including payment of land compensation, forest royalty, sale taxt and other duties and txes as may be nesnecessary.(b) With hill sand obtained by truck carriage loading and unloading and carriage to the site of work. | item 57 | 580 | Cu.m. |
| 58 | 58 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item 58 | 545 | Sq.m. |
| 59 | 59 | Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete. | item 59 | 83 | Sqm |
| 60 | 60 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | item 60 | 120 | Sqm |
| 61 | 61 | Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) finished with a floating coat of neat cement including rounding of junctions with floor. | item 61 | 13 | Cum. |
| 62 | 62 | Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) SUN ROCK HIGH CTS Tiles (Pavers)(a) Silicon (Pavers) 60 mm thick | item 62 | 172 | Cum. |
| 63 | 63 | Providing scaffolding using L&T-Doka access scaffold system upto a height of 40m. supported by frames of bamboos/timber H-beams, bracings including suitable couplers, pins, tower spindles and 2nd class timber plank platforms complete as specified and directed by the department. (measurement to be taken on elevation area of the building/ structure). | item 63 | 413 | Sqm. |
| 64 | 64 | Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)ii) Hindware makea) White(i) Wall mounted Closet Alexa (inclusive of seat cover and fittings) (Cat. No. 92032) | item 64 | 4 | Each |
| 65 | 65 | Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)i) Parryware makeConcealed Cistern (Cat.No.CIB-WHT-31801011X) with Control Plate (CP) (Cat. No. CIS-CHR-31191510X) | item 65 | 4 | Each |
| 66 | 66 | Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Vitreous water closet squatting pan (Indian type W.C Orissa pattern) of size 530 x 410 mm i) Parryware makei)Hindware make | item 66 | 1 | Each |
| 67 | 67 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.(B) Hindware Makea) White(vi) Riva (Cat. No.96003) | item 67 | 3 | Each |
| 68 | 68 | Supplying fiting and fixing glass division plate of Jaquar make including fitting and fixing compete as directed and specified. i) Parryware makea) White(i) Partion Magnum / Large (Cat. No.C0571/07) | item 68 | 2 | Each |
| 69 | 69 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)Counter Top Basin(B) Hindware Make(a) White(iv) Topaz (Cat. No.91028) | item 69 | 10 | Each |
| 70 | 70 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately(B) Nirali(i) Glister Jumbo (Bowl Size - 610 x 460 x 254) Glossy | item 70 | 1 | Each |
| 71 | 71 | Providing fitting and fixing Decorative Mirror complete as directed and specified.(B) Jaquar Make (a) Double Arm Wall Mounted reversible plain / Magnifying (3X) Pivotal Mirror (Cat. No.ACN-1193N) | item 71 | 10 | Each |
| 72 | 72 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.(iv) American Standard(b) Acacia soap dish (Cat.No. VP-DY41-N) | item 72 | 10 | Each |
| 73 | 73 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.(i) Jaquar Make(i) Continental towel ring square (Cat.No. ACN-1121) | item 73 | 10 | Each |
| 74 | 74 | Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.(i) Jaquar Make(vii) Kubix toilet roll holder with cover (Cat.No.AKB-35753) | item 74 | 4 | Each |
| 75 | 75 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.(c) Cera make (iii) Waste coupling with pop-up | item 75 | 17 | Each |
| 76 | 76 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.(c) Cera make (ii) Bottle trap 228 mm (9”) (Cat.No.104A) | item 76 | 10 | Each |
| 77 | 77 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item 77 | 35 | Rm. |
| 78 | 78 | (iv) 75mm dia. | item 78 | 6 | Rm. |
| 79 | 79 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item 79 | 12 | Each |
| 80 | 80 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item 80 | 20 | Each |
| 81 | 81 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | item 81 | 9 | Each |
| 82 | 82 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(iv) 75mm dia. PVC cowel of ISI make | item 82 | 4 | Each |
| 83 | 83 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.(a) 110mm dia | item 83 | 17 | Each |
| 84 | 84 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item 84 | 4 | Each |
| 85 | 85 | Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified. | item 85 | 4 | Each |
| 86 | 86 | Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. 50 Users | item 86 | 1 | Each |
| 87 | 87 | Supplying and placing ferrocement water tanks of circular/rectengular shape over stagging with manhole cover with locking and clearing arrangement including providing pads of size as required for inlet and outlet pipes complete as directed.(Stagging should be measured and paid separately). 1000 Lt capacity water tank | item 87 | 2 | Each |
| 88 | 88 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified.(B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40)f)15 mm dia | item 88 | 45 | Rm. |
| 89 | 89 | e)20 mm dia | item 89 | 45 | Rm. |
| 90 | 90 | (A) Exposed or in trenchesd) 25 mm dia | item 90 | 20 | Rm. |
| 91 | 91 | (A) Exposed or in trenchesa) 50 mm dia | item 91 | 15 | Rm. |
| 92 | 92 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Jaquare make (b)Queen's collection /The Stealth Rangers (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)ii) C.P. 2-way bibcock double handle with flange Cat No.21017 | item 92 | 8 | Each |
| 93 | 93 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Jaquare make (b) Queen's collection/ The Stealth Ranger (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)(i) Angular stop cock with wall flange | item 93 | 17 | Each |
| 94 | 94 | Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (III) Jaquare make c).Stealth Rangers - flush cock with wall flange 25mm with plain knob (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) | item 94 | 10 | Each |
| 95 | 95 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (II) Jaquare make (VIII) GROHE Brand(a) Pillar cock | item 95 | 10 | Each |
| 96 | 96 | Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. (III) Jaquar make (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)viii) 3-Hole basin mixer with popup waste system Cat No.7191 | item 96 | 10 | Each |
| 97 | 97 | Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. (V) Jaquar make iii) Wall mixer 3 in 1 system with provision for both telephonic shower and overhead shower complete with wall flange with 115mm long bend pipe Cat No.7281 | item 97 | 2 | Each |
| 98 | 98 | Supplying, fitting and fixing Chrome Plated (C.P.) sink mixer complete as directed. (III) Jaquar make ii) Sink mixer, single hole regular spout (table mounted model) with 450mm long copper pipes and brass nuts.Cat No.7319 | item 98 | 1 | Each |
| 99 | 99 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)(VI) Grohe make: Bau over head shower with arm 3 adjustable spreys with wall flenge Cat No- 27398000 Grohe make: Bau over head shower with arm 3 adjustable spreys with wall flenge Cat No- 27398000 (i) Shower arm light casted with wall flange | item 99 | 2 | Each |
| 100 | 100 | Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately)Lauret make (Telephonic hand shower with 1.5 m PVC pipe with hook) | item 100 | 4 | Each |
| 101 | 101 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.c) 25 mm dia. | item 101 | 6 | Each |
| 102 | 102 | a) 50mm dia | item 102 | 2 | Each |
| 103 | 103 | Taurus make FRP Composite Structural vessel Iron Removal Filters of 100 % rustproof vessels complete with Top & bottom Strainers, Multiport Valves, Quality filter media-e.g Treated Sand,Mno2 ,Barakar Sand Gravels & Pebbles. ISO, NSF certified.(I) 1000 liters capacity | item 103 | 1 | Each |
| 104 | 104 | (D) ULTRAVIOLET (UV) Water Purifiers\nTAURUS make UV water Purifiers with Stainless Steel UV Chamber, Quartz Glass, Imported UV lamp, complete with in-out threaded openings ½” onwards, with 10” Pre filter for dirt, iron, turbid removal. (III)300 liters capacity | item 104 | 2 | Each |
| 105 | 105 | Preparation of site for placement of the drilling rig including excavation of mud pit, circulation drain, collection chember etc. all complete as directed. | item 105 | 1 | Each |
| 106 | 106 | Movment of rog from the Divisional Head Quarter to the drilling site including cost of P.O.L. all complete as directed. | item 106 | 30 | Km. |
| 107 | 107 | Transportation of all ancillary equipments, camp materials, welding set, rig accessories etc. from the Divisional Head Quarter to the work site including cost of P.O.L. all complete as directed.a) upt ot 100 km. distance from the Divisional Head Quarter. | item 107 | 30 | Km. |
| 108 | 108 | Drilling with drill bit in overburden portion of soil drilling rig using D.T.H in all kinds of rock formation including collection of sample at every 3.0 m. depth of boring or wherever there is a change of strata in sample boxes with distingushing marks upto required depth of boring along with breaking rock fracture for desired dicharge,withdrawing drilling rod and finishing the bore hole by ramming up to a required dia. up to the bottom and washing the well as per direction of the deptt. all complete including testingof yield drawdoun of SWL of the DTW in presents of engineer /vincharge with submission of all reports and lithology of the well as dircted by the deptt. | item 108 | 274 | Rm. |
| 109 | 109 | Labour charge for sinking, lowering, fitting, fixing in position of 200 mm dia. U.P.V.C pipe assembly compresing of strainer, pipes and cone in potable water bearing strata, washing the bore well etc. and supplying necessary jointing materials including carriage of materials and cleaning and priming the tube well all complete as directed.b) from 50 to 100 m. depth. | item 109 | 182 | Rm. |
| 110 | 110 | Labour charge for packing coarse sand around strainer and casing pipe including supplying and carriage of material all complete as directed and specified. | item 110 | 182 | Rm. |
| 111 | 111 | Labour charge for sinking, lowering, fitting, fixing in position of 40 mm dia. U.P.V.C pipe 40 mm dia. strainer placed with 40 mm dia. cone / plug at the bottom of the tube well washing the bore well etc. and supplying necessary jointing materials including carriage of materials and cleaning and priming the tube well all complete as directed. | item 111 | 182 | Rm. |
| 112 | 112 | Supplying of U.P.V.C. Ribbed Screen Pipe:-a) 40 mm dia. | item 112 | 182 | Rm. |
| 113 | 113 | Supplying of U.P.V.C. Pipes (IS : 12818/1992)(i) 300 mm dia. | item 113 | 3 | Rm. |
| 114 | 114 | Developing of D.T.H with air compressor, Make-Kirloskar / Cumins all completed as directed. | item 114 | 8 | Hour |
| 115 | 115 | Supplying and packing rea gravel around the periphery of casing including screening, washing etc. all complete as directed. | item 115 | 15 | Cum. |
| 116 | 116 | Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 3 HP STAGE 7 to 40 with MCB controlled Submersible motor pump set control panel. | item 116 | 1 | Each |
| 117 | 117 | Supplying fitting and fixing including necessary connection as approved by the deptt. of starter (Crompton Greaves / Control & switch gear / BCH / L&T Siemers make) of the following type and capacity as specified and directed by the deptt. (Crompton Greaves / Control & switch gear / BCH / L&T Siemers make).D.O.L. Starter (Crompton Greaves / Control & switch gear / BCH / L&T Siemers make) up to 15 HP, 17.4 to 24A | item 117 | 1 | Each |
| 118 | 118 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.\n3 module type Metal | item 118 | 42 | Each |
| 119 | 119 | 6 module type Metal | item 119 | 6 | Each |
| 120 | 120 | 8 module type Metal | item 120 | 9 | Each |
| 121 | 121 | 9 module type Metal | item 121 | 9 | Each |
| 122 | 122 | 12 module type Metal | item 122 | 8 | Each |
| 123 | 123 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department.\n3 module | item 123 | 42 | Each |
| 124 | 124 | 6 module | item 124 | 6 | Each |
| 125 | 125 | 8 module | item 125 | 9 | Each |
| 126 | 126 | 9 module | item 126 | 9 | Each |
| 127 | 127 | 12 module | item 127 | 8 | Each |
| 128 | 128 | Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item 128 | 24 | Each |
| 129 | 129 | Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item 129 | 178 | Each |
| 130 | 130 | Supplying with fitting fixing of 6/10 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item 130 | 9 | Each |
| 131 | 131 | Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item 131 | 24 | Each |
| 132 | 132 | Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLANZE), SCHNEIDER (ZENSELO) including making necessary connection as per direction of department. | item 132 | 42 | Each |
| 133 | 133 | Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED,MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item 133 | 3 | Each |
| 134 | 134 | Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. | item 134 | 14 | Each |
| 135 | 135 | Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item 135 | 30 | Each |
| 136 | 136 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system.\n(a) with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit. | item 136 | 47.88 | Metre. |
| 137 | 137 | b) with 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit | item 137 | 18 | Metre. |
| 138 | 138 | Supplying including installation of the Octagonal poles shall be designed to withstand the maximum wind speed of 169 km/hr. The top loading i.e. area and weight of fixtures are to be considered to calculate maximum deflection of the poles and the same shall meet the requirement of BS:5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding of the pole shaft. The welding of the pole shaft shall be done by Submerged Welding process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per process approved by Third Party Inspection agency. (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) \nPole Type BOP or equivalent-1030 Height 10 m The materials of the pole as follows : Conforming to grade S355JO Conforming to grade S355JO, Base Plate :- Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts :- 6.8 Gr. As per IS 1367, Pole Sections:- The Octagonal Poles shall be in single piece with single longitudinal welding join. Galvanization :- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. :- (A/ 70, Bottom Dia.:- (A/ 175, Sheet Thickness :- 3mm, Base Plate Dimensions :- (L x B x 275 x 275 x 16, Foundation Bolt Size:- (no. x dia.) 4 x 24 Dia, Pitch Circle Dia. (PC :- 270, Bolt Length:- 750, Projected Bolt Length :-125, Anchor plate thickness :- 4 mm, Pole Foundation :-The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation :- The foundation shall be done with ( Earth work :- 2.04 cubic Meters.RCC :- 1:1.5 : 3 proportion 0.65 cubic metres. Steel:- 22.43 Kg.\n Shuttering :- 4.32 square metres. = 22.43 Kg. | item 138 | 5 | Each |
| 139 | 139 | Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries. \n Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. \ni Armed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) \n Stiffener plate from arm of the following \nSingle arm bracket 1000mm long for 3m to 10 metre. Poles.types : | item 139 | 5 | Each |
| 140 | 140 | Supplying with fitting & fixing of the following road lighting luminaries complete in the existing pole with high power LED and extendable up to with unique peanut lens to ensure uniform distribution including making necessary connection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department.\nHavells make) type: LHRD01124674 24 W LED 6K or equivalent (Equivalent will be selected by the deptt considering the mother items rate PHILIPS/ BAJAJ/ CROMPTON/ HPL/ SOLAR/ Wipro make) | item 140 | 5 | Each |
| 141 | 141 | Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.\n1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no\n2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos.\n3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set\n4. 40 Amp 4 pole ON-OFF poser contactor - 1 No.\n5. Surface mounting timer switch - 1 No.\n6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos | item 141 | 1 | Each |
| 142 | 142 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item 142 | 6 | Each |
| 143 | 143 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item 143 | 6 | Each |
| 144 | 144 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item 144 | 120 | Metre. |
| 145 | 145 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . \n 3 Core A2XWY A2XFY\n4.00 Sq.mm 3 Core armoured U.G. cable | item 145 | 100 | Metre |
| 146 | 146 | 6.00 Sq.mm 3 Core armoured U.G. cable | item 146 | 80 | Metre |
| 147 | 147 | 3 & 1/2 Core A2XFY\n35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item 147 | 35 | Metre |
| 148 | 148 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)\nCore - 3 A2XWY A2XFY\n4.00 Sq.mm 3 Core U.G. cable in 25mm dia medium duty G.I. pipe | item 148 | 8 | Metre |
| 149 | 149 | 6.00 Sq.mm 3 Core U.G. cable in 32mm dia medium duty G.I. pipe | item 149 | 8 | Metre |
| 150 | 150 | Core - 3 & 1/2 A2XWY A2XFY\n35.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) | item 150 | 10 | Metre |
| 151 | 151 | Supplying with fitting and fixing sheet steel cable junction box of size 40cm x 20cm x 15 cm made of 16 SWG thick MS Sheet with provision for hinge door and panel locking arrangement complete painted with 2 coats of metal primer and 2 coats of enamelled gloss paint of approved brand and manufacture to give an even shape including cleaning surface to remove of all dirt, dust and other foreign matter, the box is to be fitted on the bottom section of pole with minimum 165 mm dia 25 mm x 5mm size flat iron pole clamp complete with making necessary connection as directed consisting of the following electrical items. | item 151 | 5 | Each |
| 152 | 152 | Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt.\nShort point up to 3.00 metre. length. | item 152 | 32 | Each |
| 153 | 153 | Medium point up to 6.00 metre. Length. | item 153 | 59 | Each |
| 154 | 154 | Long point up to 10.00 metre. Length. | item 154 | 38 | Each |
| 155 | 155 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd pin of the socket as required on the switch board in flat ISI marked casing 'n' capping system, when fitted on same board of light and fan. | item 155 | 21 | Each |
| 156 | 156 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.\nMedium point up to 6.00 metre. Length. | item 156 | 16 | Each |
| 157 | 157 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete.\nMedium point up to 6.00 metre. Length. | item 157 | 13 | Each |
| 158 | 158 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | item 158 | 120 | Metre. |
| 159 | 159 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system. | item 159 | 176 | Metre. |
| 160 | 160 | With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system. | item 160 | 20 | Metre. |
| 161 | 161 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. \nWith 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system. | item 161 | 140 | Metre. |
| 162 | 162 | Supplying, installation, testing and Commission of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department \n15W, BBS 170 1 X DLED 5000 PSU-WH Phillip make GREEN LED recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make). | item 162 | 20 | Each |
| 163 | 163 | Supplying and fixing of Call bell ( Buzzer ) including 6 amp capacity flush type bell push switch including connection as approved by the Deptt.)as required. | item 163 | 3 | Each |
| 164 | 164 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED ceiling light fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. \n LED Ceiling Light 12W | item 164 | 10 | Each |
| 165 | 165 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including 20 watts CFL lamp and connection as approved by the Deptt.)as required. | item 165 | 24 | Each |
| 166 | 166 | Installation, testing and commissioning of pre-cabled fluorescent of all types, complete with all accessories and tubes etc. including supplying ball and socket arrangement, suspension down rod of 19 mm dia H.G. conduit up to 30 cm length including painting and connection as approved by the Deptt.)with 1.5 sq. mm copper cables as required. | item 166 | 30 | Each |
| 167 | 167 | Supplying fitting and fixing of retrofit T-5 lamp in the existing luminaries. PHILIPS/ CROMPTON GREAVES/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR make.\nT5 LAMP WITH BOTH END connection cable, as approved by the Deptt.TOR WITH BALLAST 28 W | item 167 | 56 | Each |
| 168 | 168 | Supplying installation testing and commissioning of 1000 W Halogen profile light consisting of 2 nos.150mm dia PC lenses, imported socket, ellipsoidal anodised alluminium reflector, 1000W halogen BipinT-11 lamp, yoke colour frame & suitable clamp Make: Canara Lighting | item 168 | 6 | Nos |
| 169 | 169 | Supplying installation of 3 section telescopic stand made of steel tube. Make: Canara Lighting | item 169 | 6 | Nos |
| 170 | 170 | Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.\nPremium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)\n | item 170 | 30 | Each |
| 171 | 171 | Supplying fitting and fixing of ceiling fan regulator including connection etc complete as required\nElectronic Type | item 171 | 30 | Each |
| 172 | 172 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.\nDomestic\nPower Flow 225 mm sweep (ORIENT make) | item 172 | 2 | Each |
| 173 | 173 | Heavy Duty 450 mm sweep 900 RPM Single phase (Crompton make), Heavy Duty 450 mm sweep 900 RPM Single phase (Usha make) | item 173 | 2 | Each |
| 174 | 174 | Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.\n(CROMPTON /ORIENT/Havells/USHA or equivalent make)\nWall 43 , 400 mm sweep | item 174 | 6 | Each |
| 175 | 175 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \n4 way TPN (4+12) double door | item 175 | 2 | Each |
| 176 | 176 | 6 way TPN (4+18) double door | item 176 | 2 | Each |
| 177 | 177 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n6 to 32A\n | item 177 | 48 | Each |
| 178 | 178 | Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nB Series\nSchneider neo break, C&S, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)\n40A | item 178 | 1 | Each |
| 179 | 179 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n40A\n | item 179 | 4 | Each |
| 180 | 180 | Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nB Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) \n63A | item 180 | 1 | Each |
| 181 | 181 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n63A\n | item 181 | 8 | Each |
| 182 | 182 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make)\n125A | item 182 | 1 | Each |
| 183 | 183 | Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nC&S, Havells, Indo Asian, HPL, GECO make)\n125A | item 183 | 1 | Each |
| 184 | 184 | Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete | item 184 | 1 | Each |
| 185 | 185 | Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item 185 | 1 | Each |
| 186 | 186 | Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item 186 | 1 | Each |
| 187 | 187 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item 187 | 2 | Each |
| 188 | 188 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item 188 | 40 | Metre. |
| 189 | 189 | Supplying & laying of following size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. | item 189 | 25 | Metre. |
| 190 | 190 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.50MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 20mm X 3mm4 strip copper Bus-Bar 1.4 M length each \n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue- 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos\n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | item 190 | 1 | Each |
| 191 | 191 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . \n 4 Core A2XWY A2XFY \n50.00 Sq. mm.4 Core armoured U.G. cable | item 191 | 60 | Metre |
| 192 | 192 | For Fire Fighting and Site preparation Works | item 192 | 1 | Each |
| 193 | 193 | GST | item 193 | 1 | Each |
| 194 | 194 | Agency Charge and other misc Charges | item 194 | 1 | Each |
AI Tender Summary
Tender Timeline
Jan 27, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender