Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #26733519

Provision Of Security Wall Alongwith Concertina Wire Fencing From Mahanada Tcp To Dental Unit And Certain Other Sanctioned Works Under Age Br Ii Of Ge Sukna

Issued by Statutory Bodies & Commissions/Committees · Sukna, West Bengal
Tender Value
43 Lakhs
Estimated cost
Bid Submission
15 Feb 2021
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Provision Of Security Wall Alongwith Concertina Wire Fencing From Mahanada Tcp To Dental Unit And Certain Other Sanctioned Works Under Age Br Ii Of Ge Sukna

BOQ

Name of Work : PROVN OF SECURITY WALL ALONGWITH CONCERTINA WIRE FENCING FROM MAHANADA TCP TO DENTAL UNIT AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE B/R-II OF GE SUKNA
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11BOQ Part-I (B/R Work)
21.01Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.\n40Each
31.02Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.\n43Cum
41.03Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.\n250Sqm
51.04Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.\n74Cum
61.05Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.\n67Cum
71.06Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.\n50Cum
81.07M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.\n30Cum
91.08M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. \n28Cum
101.09M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base etc,complete all as specified and directed.\n140Sqm
111.1M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and as directed.\nMake :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills\n97Cum
121.11M&L brick work with fly ash bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed.\nMake :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills\n20Sqm
131.12M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. \nNote:- WPC shall be measured and paid separately.\n812Sqm
141.13M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.\n150Sqm
151.14Supply only liquid water proofing compound complete all as specified and directed. \nMake:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited\n6Kg
161.15M&L preparation of new plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. \nMake :- Rajasthan / Apple / Surya\n130Sqm
171.16M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. \nMake : Lovely / Anjali / Bharat Flooring / Hindustan tiles / Mehtab tiles\n140Sqm
181.17S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.\n2690Kg
191.18S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. \nMake:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Prestar / Bhushan Power & Steel Ltd\n300Sqm
201.19All as per Sl item No. 1.18 above but plain steel sheet.\n\n30Sqm
211.2M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. \nMake :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n119Sqm
221.21M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.\nMake:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n\n13Sqm
231.22M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.\n9Cum
241.23Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.\n50Sqm
251.24Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.\n175Sqm
261.25M&L use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.\n140Sqm
271.26M&L use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.\n5Sqm
281.27M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.\n12Cum
291.28M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.\n18Cum
301.29M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.\n12Cum
311.3M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.\n3050Kg
321.31All as per Sl item No. 1.30 above but 6 to 8 mm dia.\n\n400Kg
331.32All as per Sl item No. 1.30 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.\n1215Kg
341.33S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and complete all as specified and directed.\n490Kg
351.34S&F galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as as specified and directed (each line wire to be measured).\n12100 RM
361.35S&F concertina coil razor blade type, fixed with galvanissed 'J' clips, of following specification :-\n(a) Dia of coil spiral / loop - 600 mm\n(b) No of spirals / loops per bundle of coil- 50\n(c) Weight of each bundle of coil - 8 Kg (minimum)\n(d) Coverage of wall / fence per bundle of coil - 6 m\n(e) Central core wire made from high tensile spring steel wire (conforming to IS:4454) of dia 2.50 mm, UTS 1600 N/Sqmm (minimum), duly hot dipped galvanised (conforming to IS-2629) zinc coating 230gm /sqm (minimum)\n(f) Razorblade : Electro galvanized steel razorblades of length 11.50 mm, width 19 mm & thickness 0.50 mm, conforming to IS - 1573, zinc coating 120 gm/sqm , pitch of barbs 25.00 mm\n(g) Handle, clips (minimum 5 clips per 2 spiral) and spikes to be provided as required complete\nMake :- M/s Shiva Engineering Co. or equivalent\n135RM
371.36M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed.\nMake :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints\n682Sqm
381.37M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. \nMake of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) \nMake of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints\n150Sqm
391.38M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.\n6Cum
401.39M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.\n3Cum
411.4M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.\n4Cum
421.41M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed.\n1Cum
431.42M&L 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.\n25Sqm
441.43M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.\n80Sqm
451.44M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed.\n80Sqm
461.45M&L 50 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors complete all as specified and directed.\n80Sqm
471.46M&L for earth filling under floors, spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and as directed.\nNote:- Earth obtained from excavation after cleaning shall be reused in this item.\n10Cum
481.47S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.\nMake:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri\n4.5Sqm
491.48All as per Sl item No 1.47 above but without glazing bars\n\n4.5Sqm
501.49M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.\nMake:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n80Sqm
511.5M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. \nMake :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n20Sqm
521.51S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.\n60Kg
531.52S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long complete all as specified and directed.\n10Kg
541.53S&F 35 mm thick factory made flush door shutters solid core construction, with particle board core and plywood face fanels, commercial type on both side complete all as specified and directed. \nMake:- Modern Doors / Goel Brothers / Hindustan Housing Factory / Joinery Manufacturing Co.\n\n6.5Sqm
551.54S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. \nMake:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison\n9Each
561.55S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.\nMake:- M/s Bharat / M/s Classic / Alans\n3Each
571.56S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n6Each
581.57S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n3Each
591.58S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. \nMake:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington\n5Sqm
601.59S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.\n6Sqm
611.6S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.\n\n10Kg
621.61S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.\nMake of boards:- Everest / Lafarge / Armstrong / Visaka Industries\nMake of aluminium snap grid:- Everest / Lafarge / Armstrong / Visaka Industries\n80Sqm
632BOQ Part-II (E/M Work)
642.01M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n24Point
652.02All as per Sl. item No. 2.01 above but for one 5 / 6 Amps socket outlet point on same board.\n\n3Point
662.03All as per Sl. item No. 2.01 above but for one 5 / 6 Amps socket outlet point on independent board.\n\n3Point
672.04All as per Sl. item No. 2.01 above but for one light point controlled by two, 2 - way switches.\n\n2Point
682.05M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n8Point
692.06S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n30Each
702.07All as per item No. 2.06 above but two way switch.\n\n4Each
712.08S&F socket outlet 5 pin 5 / 6 Amps, 240 volts complete all as specified and directed. \nMake :- Havells / Anchor / Legrand\n6Each
722.09S&F switch socket combination 2 in 1, 6 Pin, 5 & 15 Amp, flush type universal complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n30Each
732.1S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 230/240 Volts grade complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n4Each
742.11S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.\nMake:- Havells / Anchor / Legrand\n22Each
752.12M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.\nNOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n60RM
762.13All as per item No. 2.12 above but with 2 runs of 6.0 Sqmm main wire along with 1 run of 6.0 Sqmm earth wire.\n\n60RM
772.14S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, with luminous efficacy 100 Lumen/watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed.\nMake:- Surya, Model - SLE BT 20 IL or C&S, Model - NAKSHATRA/20W or HPL, Model - HLPT51520CW or equivalent in Crompton\n12Each
782.15All as per item No. 2.14 above but 1 x 9 / 10 watt.\nMake:- Surya, Model - SLE BT 10 or C&S, Model - NAKSHATRA/10W or Crompton, Model - LDL-10-CDL or equivalent in HPL\n2Each
792.16S&F 10 watt LED Bulk head fitting, Poly carbonate housing with diffuser including electrically connecting complete all as specified and directed.\nMake:- \nSurya Model - SLE BH 10W or Crompton Model - LBHP-10-CDL or equialent in C&S / HPL\n4Each
802.17S&F exhaust fan 300 mm sweep, metal body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed.\nMake :- Crompton, Model - Drift Air 300 or equivalent in Bajaj / Orient / Havells / Almonard\n2Each
812.18S&F ceiling fan 1200 mm (minimum) sweep, AC single phase 230 V, 340 RPM (minimum) suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed. \nMake :- Bajaj, Model - Edge or equivalent in Havells / Orient / Crompton Greaves / Almonard\n4Each
822.19S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, 100A copper bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.\nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n1Each
832.2S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. \nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n6Each
842.21All as per items No 2.20 above but MCB SPN, 40 to 63 Amp.\n\n1Each
852.22M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed.\n\nNote:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.\n1Each Set
862.23S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve complete all as specified and directed. \nMake :- Legrand / Siemens / ABB / Schneider / Havells / Hager\n2Each
872.24S&F 40 mm bore galvanised steel water tubing, light grade with necessary fittings, fixed along electric pole etc, for cable protection complete all as specified and directed.\nMake - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST\n2RM
882.25Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 35 Sqmm x 3.5 Core, laid in trenches / duct / on pole complete all as specified and directed.\nMake :- Havells / KEI / Polycab / Finolex / Gloster cables Ltd / Asian Cable / RR Kabel Ltd.\n\n74RM
892.26M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. \nNote:- Punned thickness shall only be measured and paid.\n6Cum
902.27Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.\n592Each
912.28S&F geyser of capacity 25 Litres, 230V, 50Hz, vertical, wall mounted type, BEE 5 star rated, ABS outer body, inner tank with vitreous enamel coated, incoloy glass coated heating element, adjustable thermostat for temperature regulation, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin plug of 16A capacity, fixing arrangement such as. bracket, nuts, bolts washers etc. complete all as specified and directed.\nMake:- V-Guard / Bajaj / Usha / Havells / Crompton Greaves / Jaquar & Company Pvt. Ltd.\n12Each
922.29S&F geyser of capacity 50 Litres, 230V, 50Hz, vertical, wall mounted type, BEE 5 star rated, metallic outer body, incoloy glass coated heating element, adjustable thermostat for temperature regulation, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin plug of 16A capacity, fixing arrangement such as. bracket, nuts, bolts washers etc. complete all as specified and directed.\nMake:- V-Guard / Bajaj / Usha / Havells / Crompton Greaves / Jaquar & Company Pvt. Ltd.\n10Each
932.3M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board complete all as specified and directed.\nMake of cable :- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC casing caping:- Presto Plast / Finolex / Kalinga / Payal\n22Point
942.31S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.\nMake - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST\n251RM
952.32S&F 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. \nMake:- ESSCO, Cat No. - DLX-511KN or equivalent in Prayag / Gem / Parko\n\n22Each
962.33S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed.\nMake:- Prayag Cat No.- 323-HK or equivalent in Polytuf\n44Each
972.34S&F angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed.\nMake:- ESSCO, Cat No.- DLX-526KN or equivalent in Prayag / Gem / Parko\n32Each

AI Tender Summary

OUR REF NO 26733519
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43 Lakhs
LAST DATE 15-02-2021
Authority
Authority Name Military Engineer Services
Work Description Provision Of Security Wall Alongwith Concertina Wire Fencing From Mahanada Tcp To Dental Unit And Certain Other Sanctioned Works Under Age Br Ii Of Ge Sukna
Basic Detail
Tender No GE Sukna/8245
Bidding Type Tender
Location
City Sukna
State West Bengal
Key Dates
Publish Date 25 Jan 2021
Submission Date 15 Feb 2021
Open Date 17 Feb 2021
Finance
Tender Value 43 Lakhs
Tender Fee 500
EMD 86000
Exemption Not Available
Document List
Tendernotice_1.pdf
TenderDocs8245.pdf
83B5E665-F7AB-4CBD-9CF8-2210F6781315.html
BOQ_464605.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 25, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 15, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 17, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

pdf

TenderDocs8245.pdf

html

83B5E665-F7AB-4CBD-9CF8-2210F6781315.html

xls

BOQ_464605.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders