Installation Of Transformer At Uit Auditorium , Balaji Market . Electric Work
Tender Value
14.10 Lakhs
Estimated cost
Bid Submission
04 Feb 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Transformer At Uit Auditorium , Balaji Market . Electric Work
BOQ
| Name of Work: Installation of Transformer at Uit Auditorium, Balaji Market. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply & fabrication steel structure with ms channel/angle/joist/ISMB/sheet etc. including welding rivetting cutting nut & bolt painting etc as required. | 1000 | Kg | |
| 2 | 2 | SITC of Star rated aluminium wound distribution Transformer of following rating 11/0.433KV Delta-star Connected, Vector Group Dyn 11, as per BEE star level -2 & BIS approved with losses as defined as per IS 1180 PART 1 2014. including standard accessories like conservator , silica gel breather, radiator, fins, HT cable box & LT cable boxes, off - LTC(+5% to -10% @ 2.5%) winding temperature gauge, first fill of oil, epoxy based paint, including carrying of pre-commission testing & Charging of Transformer.(Transformer should be CTL tested , w/o any extra cost) 400 KVA group 1 | 1 | Nos | |
| 3 | 3 | S&F laying following size earth wire/ in horizontal or Vertical run in ground/ surface/ recess including riveting, soldering, saddles, making connection etc. as required. | |||
| 4 | 3.1 | G.I Strip 25mm*3mm. ( Hot Dipped ) Strip | 180 | Mtr. | |
| 5 | 4 | P/laying P.V.C /XLPE insulated & P.V.C. sheathed cable of 1.1 k.v. grade with aluminum conductor of IS 1554 P-1/7098 P-I of Group I of approved make in ground as per IS : 1255 including excavation of 30 cm x 75 cm size trench, 25 Cm thick under layer of sand, 11nd class bricks covering, refilling earth compaction of earth making necessary connection testing etc. as required of size).Group 1 | |||
| 6 | 4.1 | 3.5corex300.0sqmm. (ARMOURED) | 65 | Mtr. | |
| 7 | 5 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, aluminium lugs duty crimped with crimping tool, PVC tape etc for following size of armoured PVC insulated & PVC sheathed XLPE aluminium conductor cable of 1100Volt grade as required of size. | |||
| 8 | 5.1 | 3.5corex300.0sqmm. | 4 | Set. | |
| 9 | 6 | S & Laying following size B Class GI pipe confirming to IS:1239 P-1 (1990) with accessories for laying earth conductror/strip/cable in ground/surface/recess as required 100mm dia. | 20 | Mtr. | |
| 10 | 7 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). | 2 | CUM | |
| 11 | 8 | Plate Earthling as per IS: 3043 with G.I Earth plate of size 600 mm x 600 mm x 6.0 mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia G.I. “B” Class watering Pipe including all accessories like nut bolt reducer nipple wire meshed funnel and C.C. finished chamber covered with hinged type with locking arrangement C.I Cover C.I Frame of size 300 mm x 300 mm complete with alternate layers of salt and coke/ charcoal testing of earth resistance as required. | 7 | Nos | |
| 12 | 9 | P&F laying XLPE insulated IS: 7098/II/85 of Group I and approved make H.T. cable for working voltage 11 KV. Earthed direct in ground including excavating of 30 cm x 100 cm size trench 25 cm layer of river sand IInd class brick covering refilling earth compaction of earth making necessary connection testing etc. asMake RPG/Havells/KEI. required of size. Group 1 3 core 185 sqmm. | 50 | Mtr. | |
| 13 | 10 | Providing and making heat shrinkable type indoor/outdoor/ straight through terminations/ joint kit of Group 1 and approved make suitable for XLPE insulated 11 K.V/33KVcable with required components preparation of cable ends testing etc as required of following sizes. Group 1 | |||
| 14 | 10.1 | 3core 120/150/185/225sqmm. Out door kit | 3 | Set. | |
| 15 | 10.2 | 11 KV End Termination Kit Indoor type 3 core 120/150/185/225 Sq.mm | 3 | Set. | |
| 16 | 11 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Hard rock (blasting prohibited) useful material 30% | 5 | cum | |
| 17 | 12 | SITC of 11 KV, 400/630 A, 20kA / 3 sec, Out door, Extensible type Ring main unit (RMU) in suitable RCC foundation with 2 no. Load break switch & 1 no. VCB / SF6 circuit breaker with over load, Earth fault, short circuit relay, copper bus bar, earthing switch, mechanical ON / OFF / Earth indication, Voltage presence indicator, Ring core protection CT 2.5 VA, 10P10 as per transformer rating, Shunt trip coil, Anti reflex operating handle, right angle boots etc. as required. | 1 | Set | |
| 18 | 13 | Construction of tube-well upto 100 mtr. depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over-burden including lowering of casing pipes, but excluding cost of casing pipes as per IS:2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube-well should have a throughout bore as per nominal dia of casing pipe : 150mm dia nominal bore | 32 | Mtr | |
| 19 | 14 | Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | 25.93 | sqm |
AI Tender Summary
Tender Timeline
Jan 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 04, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender