Military Engineer Services-MES has published Repair To Flooring , Plastering , Hard Standing For Otm Of Zone A , B , D And Reair To Fencing , Boundary Wall At Lgj Mil Stn. Submission Date for this Tender is 22-02-2021. Civil Work Tenders in GE Lalgarh Jattan Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 15-Feb-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-02-2021 |
Name of Work: REPAIR TO FLOORING, PLASTERING, HARD STANDING FOR OTM OF ZONE A, B, D AND REAIR TO FENCING, BOUNDARY WALL AT LGJ MIL STN | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge. | 2 | Cum | |
2 | 2 | Demolition of brick work/ stone masonry built in cement mortor of any description including all quions, pillars etc complete all as specified and directed by Engr-in-charge. | 71 | Cum | |
3 | 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge. | 10 | Per Qtl | |
4 | 4 | Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-charge. | 35 | X Sqm | |
5 | 5 | Dismantling of post & struts (wood, steel of RCC ) any section, including taking out embedded in concrete / brick portions and making good distrubed ground etc complete all as specified and directed by Engr-in-charge. | 310 | RM | |
6 | 6 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) complete all as specified and directed by Engr-in-charge. | 40 | CUM | |
7 | 7 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engr-in-charge. | 100 | Each | |
8 | 8 | M & L for RCC (1:2:4) type B0 20mm graded crushed stone aggregate as in slab including necessary formwork complete all as specified and directed by Engr-in-charge. | 1 | Cum | |
9 | 9 | M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set in cement mortar 1:6 as in cover slabs (for drain cover etc,) chajjas, shelves and similar articles with plain faces including necessary form work complete all as specified and directed by Engr-in-charge. | 1 | CUM | |
10 | 10 | S & F TMT Bars(Fe-500D) 10 mm dia and over, cut to length, bend to shape required, including cranking spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge. | 150 | Kgs | |
11 | 11 | S & F TMT Bars(Fe-500D) 6 to 8 mm dia and over, cut to length, bend to shape required, including cranking spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge. | 50 | Kgs | |
12 | 12 | M&L for brick work with sub class 'B' bricks (Best quality) straight or curved on plan not exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge. | 50 | Cum | |
13 | 13 | ,--- ditto--- all as per item No 12 above but except bricks (bricks obtained from item no 2) complete all as specified and directed by Engr-in-charge. | 20 | Cum | |
14 | 14 | M&L for Cement Concrete 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggr) as in coping including necessary form work and finishing the surfaces etc complete all as specified and directed by Engr-in-charge. | 5 | Cum | |
15 | 15 | M & L cement concrete in surface channels and drains type B-2 (1:2:4) 20mm graded aggregate in surface channel and drain complete all as specified and directed by Engr-in-charge. | 5 | Cum | |
16 | 16 | M & L cement concrete in type B-2 (1:2:4) 40mm graded aggregate in foundation , filling and mass concrete complete all as specified and directed by Engr-in-charge. | 10 | Cum | |
17 | 17 | Supply and fix mild steel work in fencing post and flat iron clamps etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling for bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge. | 1600 | Kgs | |
18 | 18 | M & L 100 mm thick cement concrete type B2 1:2:4 type using (40mm graded stone aggregate) as in hard standing finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. | 420 | Sqm | |
19 | 19 | Taking down cement or cement lime plaster of any description on brick or stone walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge. | 2100 | Sqm | |
20 | 20 | M & L for Rendering cement plaster 15 mm thick in cement mortar 1:4 on fair face of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. | 1200 | Sqm | |
21 | 21 | S & F for barbed wire galvanised steel 2 strand 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and stringing and fixing to fencing posts including securing or tying with and privious of galvanised mild steel wire staples or steel pins etc (each line of horizontal or diagonal wire shall be measured separately) complete all as specified and directed by Engr-in-charge. | 100 | 100\nRM | |
22 | 22 | Supply and fix chain link MS galvanised fencing, any size including line wires, any mesh, (Minnimum weight 3 Kg/Sqm) complete all as specified and directed by Engr-in-charge. | 2000 | Kg | |
23 | 23 | Fixing only chain link MS galvanised fencing, any size including line wires, any mesh, complete all as specified and directed by Engr-in-charge. | 400 | Sqm | |
24 | 24 | S&F MS screw bolts 10mm dia with hexagonal or square heads at one end screwed at other end, dia of shank 5 to 10 mm and length of bolt exc. 5cm but n.exc. 10 cm complete all as specified and directed by Engr-in-charge. | 150 | Kg | |
25 | 25 | S&F MS round bars 10mm dia for support of fencing complete all as specified and directed by Engr-in-charge. | 400 | Kg | |
26 | 26 | M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engr-in-charge. | 1200 | Sqm | |
27 | 27 | M & L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth includincomplete all as specified and directed by Engr-in-charge.complete all as specified and directed | 145 | Sqm | |
28 | 28 | M & L for 75 mm thick cement concrete type B-1 (1;3:6) (40mm graded aggregate) use as in sub base of floor complete all as specified and directed by Engr-in-charge. | 300 | Sqm | |
29 | 29 | M & L Machine pressed pre cast concrete interlocking chemically treated paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60mm thickness, M-35 grade and including over 50mm thick Fazlika sand cusion complete all as specified and directed by Engr-in-charge. | 870 | Sqm | |
30 | 30 | M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones size 300mm x 300mm x 100mm with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed by Engr-in-charge. | 10 | Cum | |
31 | 31 | M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc section of fillet n.exc. 25 sq. cm complete all as specified and directed by Engr-in-charge. | 75 | Rm | |
32 | 32 | M & L reinforced cement concrete pipes, class NP2, laid and jointed with collars of size 450 mm bore, complete all as specified and directed by Engr-in-charge. | 25 | RM | |
33 | 33 | Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cememt , including forms, moulds, mitred/stopped ends etc complete all as specified and directed by Engr-in-charge. | 100 | RM | |
34 | 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified and directed by Engineer-in-Charge | 450 | Sqm | |
35 | 35 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge. | 2000 | Sqm | |
36 | 36 | M&L for brickwork with fly ash bricks, straight or curved exc. 6 m mean radius built in cm 1:6 complete all as specified and directed by Engineer-in-Charge | 1 | Cum | |
37 | 37 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shed polished, area of each tiles exceeding 0.36 sqm,but not exceeding 0.42 sqm in floors etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge | 200 | Sqm | |
38 | 38 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shed polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm,on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge | 30 | Sqm | |
39 | 39 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge | 100 | Sqm | |
40 | 40 | M&L for glazed ceramic coloured tiles of size 350 X 250 X 7 mm / 450 x 350 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge | 120 | Sqm | |
41 | 41 | M&L for machine cut Kota stone slab flooring 20-25 mm thick (minimum size 55cm x 55cm) laid over and including 15 mm thick screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge. | 2000 | Sqm | |
42 | 42 | M&L for Kota stone slab 15-20mm thick in riser of steps, skirting , dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed by Engineer-in-Charge. | 150 | Sqm | |
43 | 43 | M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge | 600 | Sqm | |
44 | 44 | M&L for two coats of oil bound distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. | 600 | Sqm | |
45 | 45 | M&L for complete removal of existing treatment and two coats of oil bound distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. | 1000 | Sqm | |
46 | 46 | M&L for two coats of cement base paint on newly plastered surfaces incl preparation etc. complete on wall complete all as specified and directed by Engineer-in-Charge | 1000 | Sqm | |
47 | 47 | M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement including mixing of WPC in mortar complete all as specified and directed by Engineer-in-Charge. | 1000 | Sqm | |
48 | 48 | Supply only integrated water proofing compound complete all as directed by Engr-in-charge.\nMake:- Dr Fixit/Fosroc/BASF/STP. | 200 | Kg | |
49 | 49 | Material and labour for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors complete all as specified and directed by Engineer-in-Charge. | 600 | Sqm | |
50 | 50 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail