Remaining Work Construction Of Pre Primary School At Swami Vivekanand Govt . Model School Ranil Block Rani Distt . Pali
Tender Value
44.09 Lakhs
Estimated cost
Bid Submission
02 Feb 2021
0 days left
EMD
88180
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pali → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Remaining Work Construction Of Pre Primary School At Swami Vivekanand Govt . Model School Ranil Block Rani Distt . Pali
BOQ
| Name of Work: Remaining work Construction of Pre Primary School at Swami Vivekanand Govt. Model School Ranil Block Rani Distt. Pali | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Part (A) Civil work BSR 2013\nEarth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | BI01010001010000000000000515BI0100001113 | 181.213 | Cum |
| 2 | 2 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000 : 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken) | BI01010001010000000000000515BI0100001114 | 14.1451 | Cum |
| 3 | 3 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000 : 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001115 | 11.0793 | Cum |
| 4 | 4 | Random rubble dry stone Kharanja under floor. | BI01010001010000000000000515BI0100001116 | 17.5636 | Cum |
| 5 | 5 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in : Cement Mortar 1:6 (1-Cement:6-Sand). | BI01010001010000000000000515BI0100001117 | 23.8613 | Cum |
| 6 | 6 | Half brick masonry in superstructure up to third story.of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar. Cement mortar 1:4 (1-Cement:4-coarse sand). Add extra over all type of bricks for using clay fly ash bricks. | BI01010001010000000000000515BI0100001118 | 341.722 | Sqm |
| 7 | 7 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement IS 456-2000 : with 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001119 | 107.788 | Cum |
| 8 | 8 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. | BI01010001010000000000000515BI0100001120 | 901.039 | Sqm |
| 9 | 9 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20mm thick. | BI01010001010000000000000515BI0100001121 | 462.965 | Sqm |
| 10 | 10 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 12mm thick. | BI01010001010000000000000515BI0100001122 | 1187.23 | Sqm |
| 11 | 11 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) | BI01010001010000000000000515BI0100001123 | 675.372 | Sqm |
| 12 | 12 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. IS 1038-1983. Partially fixed and partially openable fixed area not exceed 33% | BI01010001010000000000000515BI0100001124 | 65.7993 | Sqm |
| 13 | 13 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | BI01010001010000000000000515BI0100001125 | 65.7993 | Sqm |
| 14 | 14 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | BI01010001010000000000000515BI0100001126 | 800.04 | Kg. |
| 15 | 15 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001127 | 411.89 | Kg. |
| 16 | 16 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983. Commercial Veneer both side 30 mm thick shutter | BI01010001010000000000000515BI0100001128 | 21.1431 | Sqm |
| 17 | 17 | Providing double leaf door shutter instead of single lead door shutter | BI01010001010000000000000515BI0100001129 | 17.5651 | Sqm |
| 18 | 18 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). | BI01010001010000000000000515BI0100001130 | 17.5651 | Sqm |
| 19 | 19 | Extra for providing external lipping with 2nd class teak wood battens 6mm minimum depth on all edges of shutters (over all area of door shutter to be measured) | BI01010001010000000000000515BI0100001131 | 38.7082 | Sqm |
| 20 | 20 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. | BI01010001010000000000000515BI0100001132 | 675.372 | Sqm |
| 21 | 21 | Finishing walls with water proofing cement paint of approved brand and manufactured and required shade to give an even shade inculding all scaffolding of new work three or more coats | BI01010001010000000000000515BI0100001133 | 1187.23 | Sqm |
| 22 | 22 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001134 | 1862.6 | Sqm |
| 23 | 23 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : New work (Three or more coats). | BI01010001010000000000000515BI0100001135 | 462.965 | Sqm |
| 24 | 24 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | BI01010001010000000000000515BI0100001136 | 239.15 | Sqm |
| 25 | 25 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 to 5000 Sq. Cm : 25 mm thick slab. | BI01010001010000000000000515BI0100001137 | 585.976 | Sqm |
| 26 | 26 | Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 25 mm thick slab area upto 901 to 2000 Sq.Cm. | BI01010001010000000000000515BI0100001138 | 99.0939 | Sqm |
| 27 | 27 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-I : Kajariya, Jhonson, Orient, Somani make etc. | BI01010001010000000000000515BI0100001139 | 106.784 | Sqm |
| 28 | 28 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). | BI01010001010000000000000515BI0100001140 | 47.9322 | Sqm |
| 29 | 29 | Providing & laying Chequerred terrazzo tiles of approved make 22 mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28 mm thick bed of C.M. 1:4 Light shade using white cement. | BI01010001010000000000000515BI0100001141 | 32.5279 | Sqm |
| 30 | 30 | Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001142 | 41.9527 | Cum |
| 31 | 31 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. | BI01010001010000000000000515BI0100001143 | 162.805 | Mtr |
| 32 | 32 | Making khurras 450 x 450mm with average minimum thickness 50 mm cement concrete 1:2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40 micron finished with 12 mm cement plaster 1:3 and one coat of neat cement, rounding edges and making and finishing the out let complete. | BI01010001010000000000000515BI0100001144 | 10 | Nos |
| 33 | 33 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bars (Tata, SAIL) | BI01010001010000000000000515BI0100001145 | 16784.7 | Kg. |
| 34 | 34 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete, using brick bats complete leveling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. | BI01010001010000000000000515BI0100001146 | 14.5568 | Cum |
| 35 | 35 | Making of drip course (tapka) in cement sand mortar 1:6 width upto 40mm and 10mm thick as per approved design | BI01010001010000000000000515BI0100001147 | 123.171 | Mtr |
| 36 | 36 | Providing and fixing curtain rods of 1.25mm thick chornium plated brass plate, with two chromium plated brass brackets fixed with cp brass screws and wooden plugs, etc wherever necessary complete 20mm | BI01010001010000000000000515BI0100001148 | 27.7439 | Mtr |
| 37 | 37 | Applying priming coat: With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. | BI01010001010000000000000515BI0100001149 | 8.0942 | Sqm |
| 38 | 38 | Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid. | BI01010001010000000000000515BI0100001150 | 550.688 | Sqm |
| 39 | 39 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). \nFor Fixed portion | BI01010001010000000000000515BI0100001151 | 9.5 | Kg. |
| 40 | 40 | For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately). | BI01010001010000000000000515BI0100001152 | 15 | Kg. |
| 41 | 41 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) With glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 | BI01010001010000000000000515BI0100001153 | 5.45 | Sqm |
| 42 | 42 | P&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 incl. costof cutting floors as reqd. embedding in floor and cover plate etc. complte as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001154 | 2 | Nos |
| 43 | 43 | Providing and fixing brass lock without handle for aluminium door, or approved quality, make & design as directed by Engineer incharge | BI01010001010000000000000515BI0100001155 | 2 | Nos |
| 44 | 44 | Providing and fixing found shape handle of outer dia 100mm with ss screws etc complete as per direction of engineer incharge polyester powder coating aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001156 | 2 | Nos |
| 45 | 45 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). IS 10521-1983. With 75 mm opening when closed. | BI01010001010000000000000515BI0100001157 | 5.855 | Sqm |
| 46 | 46 | Part (B) Sanitary work\nP & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 530x410 mm. | BI01010001010000000000000515BI0100001158 | 2 | Nos. |
| 47 | 47 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. | BI01010001010000000000000515BI0100001159 | 1 | Nos. |
| 48 | 48 | P & F water closet Seat Covers with brass hinges complete IS 2548-1996 : Solid PVC (ISI marked) grade-I White for EWC. | BI01010001010000000000000515BI0100001160 | 1 | Nos |
| 49 | 49 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS:7231. | BI01010001010000000000000515BI0100001161 | 3 | Nos |
| 50 | 50 | P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Flat Back (small) size 440x265x315 mm. | BI01010001010000000000000515BI0100001162 | 3 | Nos. |
| 51 | 51 | P&F WVC (IS: 2556 Mark) squatting urinal of standard make complete incl. cutting & making good the floor Size 450x350mm | BI01010001010000000000000515BI0100001163 | 3 | Nos. |
| 52 | 52 | P & F W.V.C. Urinal Partition plate of approved standard make of size 630x315 mm including making good the wall. | BI01010001010000000000000515BI0100001164 | 2 | Nos. |
| 53 | 53 | P & F C.P. brass Urinal Flush pipe set complete with flanged brackets of approved make. For 3 Urinals. | BI01010001010000000000000515BI0100001165 | 1 | Nos. |
| 54 | 54 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. Synethic (PTMT) | BI01010001010000000000000515BI0100001166 | 3 | Nos. |
| 55 | 55 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm | BI01010001010000000000000515BI0100001167 | 7 | Nos. |
| 56 | 56 | P&F Grating of approved quality/ make Stainless steel sheet size 125mm dia | BI01010001010000000000000515BI0100001168 | 7 | Nos. |
| 57 | 57 | P&F liquid soap contained with brackets complete of approved make : C.P. brass | BI01010001010000000000000515BI0100001169 | 3 | Nos. |
| 58 | 58 | P&F Soap dish or tray of approved quality/ make. C.P. brass | BI01010001010000000000000515BI0100001170 | 3 | Nos. |
| 59 | 59 | P&F Jet spray for water closet with C.P. copper tube flange of approved make | BI01010001010000000000000515BI0100001171 | 1 | Nos. |
| 60 | 60 | Providing and fiixng C.P. flange for 15mm dia taps | BI01010001010000000000000515BI0100001172 | 5 | Nos. |
| 61 | 61 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : C.P. Brass bib cock, 15 mm nominal bore. | BI01010001010000000000000515BI0100001173 | 4 | Nos. |
| 62 | 62 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make : C.P. Brass 15 mm nominal bore. | BI01010001010000000000000515BI0100001174 | 16 | Nos. |
| 63 | 63 | P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 600 mm. | BI01010001010000000000000515BI0100001175 | 16 | Nos. |
| 64 | 64 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25 mm nominal bore. | BI01010001010000000000000515BI0100001176 | 3 | Nos. |
| 65 | 65 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litres capacity. | BI01010001010000000000000515BI0100001177 | 2 | Nos. |
| 66 | 66.01 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass thereaded fittings i/c fixin the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer incharge (concealed work including cutting chases and making good the walls etc.)\n(a) 20mm nominal outer dia pipes | BI01010001010000000000000515BI0100001178 | 20 | Mtr |
| 67 | 66.02 | (b) 25mm nominal outer dia pipes | BI01010001010000000000000515BI0100001179 | 65 | Mtr |
| 68 | 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass thereaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement and trenching refilling & testing of joints complete as per direction of engineer incharge (External work) 25mm nominal outer dia pipes | BI01010001010000000000000515BI0100001180 | 50 | Mtr |
| 69 | 68 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, 7.2 Kg. C.I. cover with frame, Internal Chamber size 300 X 300mm. | BI01010001010000000000000515BI0100001181 | 2 | Nos. |
| 70 | 69.01 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.\n(a) Inside size 450 x 450mm upto depth of 0.5m & 15Kg CI cover with frame | BI01010001010000000000000515BI0100001182 | 7 | Nos. |
| 71 | 69.02 | (b) Inside size 600x450mm upto depth upto 0.5mtr to 1.0mtr & 38Kg CI cover with frame | BI01010001010000000000000515BI0100001183 | 3 | Nos. |
| 72 | 70 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 160mm dia. | BI01010001010000000000000515BI0100001184 | 50 | Mtr |
| 73 | 71 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110mm dia | BI01010001010000000000000515BI0100001185 | 80 | Mtr |
| 74 | 72.01 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110mm dia\na) Coupler | BI01010001010000000000000515BI0100001186 | 15 | Nos. |
| 75 | 72.02 | b) Bend 45 Dg. | BI01010001010000000000000515BI0100001187 | 3 | Nos. |
| 76 | 72.03 | c) Door Bend 87.5Dg. | BI01010001010000000000000515BI0100001188 | 3 | Nos. |
| 77 | 72.04 | d) Single `Y' | BI01010001010000000000000515BI0100001189 | 10 | Nos. |
| 78 | 72.05 | e) Socket Plugs | BI01010001010000000000000515BI0100001190 | 3 | Nos. |
| 79 | 72.06 | f) Pipe Clip | BI01010001010000000000000515BI0100001191 | 30 | Nos. |
| 80 | 72.07 | g) WC Connector | BI01010001010000000000000515BI0100001192 | 3 | Nos. |
| 81 | 72.08 | h) WC connector (Bend) with ring | BI01010001010000000000000515BI0100001193 | 3 | Nos. |
| 82 | 72.09 | i) Nahni Trap without Jali 4\" | BI01010001010000000000000515BI0100001194 | 7 | Nos. |
| 83 | 72.1 | j) Vent Cowel 100mm | BI01010001010000000000000515BI0100001195 | 10 | Nos. |
| 84 | 73 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr | BI01010001010000000000000515BI0100001196 | 2 | Nos. |
| 85 | 74.01 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe).\na) 100mm dia S.W. Pipe. | BI01010001010000000000000515BI0100001197 | 15 | Mtr |
| 86 | 74.02 | b) 150mm dia S.W. Pipe. | BI01010001010000000000000515BI0100001198 | 50 | Mtr |
| 87 | 75.01 | Part (C) Electric work\nWiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.\n(a) Short point (up to 3 mtr.) | BI01010001010000000000000515BI0100001199 | 10 | Point |
| 88 | 75.02 | (b) Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001200 | 25 | Point |
| 89 | 75.03 | (c) Long point (up to 10 mtr..) | BI01010001010000000000000515BI0100001201 | 90 | Point |
| 90 | 76.01 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.\n(a) On board | BI01010001010000000000000515BI0100001202 | 15 | Point |
| 91 | 76.02 | (b) Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001203 | 2 | Point |
| 92 | 76.03 | (c) Long point (up to 10 mtr..) | BI01010001010000000000000515BI0100001204 | 10 | Point |
| 93 | 77 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required. | BI01010001010000000000000515BI0100001205 | 12 | Nos. |
| 94 | 78.01 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.\n(a) 25 mm | BI01010001010000000000000515BI0100001206 | 525 | Mtr |
| 95 | 78.02 | (b) 32 mm | BI01010001010000000000000515BI0100001207 | 50 | Mtr |
| 96 | 79.01 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.\n(a) 1 x 1.5 sq.mm | BI01010001010000000000000515BI0100001208 | 100 | Mtr |
| 97 | 79.02 | (b) 2 x 2.5 sq. mm. + 1x1.5sqmm | BI01010001010000000000000515BI0100001209 | 300 | Mtr |
| 98 | 79.03 | (c) 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | BI01010001010000000000000515BI0100001210 | 150 | Mtr |
| 99 | 80 | P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 16.0 Sq.mm 4 core ARM | BI01010001010000000000000515BI0100001211 | 50 | Mtr |
| 100 | 81 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 4 x 16.0 sq.mm | BI01010001010000000000000515BI0100001212 | 2 | Set |
| 101 | 82 | Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required | BI01010001010000000000000515BI0100001213 | 4 | Nos. |
| 102 | 83 | Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required | BI01010001010000000000000515BI0100001214 | 75 | Mtr |
| 103 | 84 | SITC of 10/100 MBPS Unmanaged Switch 8 Port | BI01010001010000000000000515BI0100001215 | 1 | Nos. |
| 104 | 85 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required RJ-11 telephone jack single two line | BI01010001010000000000000515BI0100001216 | 4 | Nos. |
| 105 | 86 | P & F following size mounting grid plates with cover plates 1/2 Module | BI01010001010000000000000515BI0100001217 | 4 | Nos. |
| 106 | 87 | P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. 1-2 Module | BI01010001010000000000000515BI0100001218 | 4 | Nos. |
| 107 | 88 | Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping. \nUnarmoured Telephone cable in existing surface or recessed conduit/casing capping. 2 pair | BI01010001010000000000000515BI0100001219 | 75 | Mtr |
| 108 | 89 | Jelly filled armoured (PIJF) Armoured telephone cable including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 10 pair | BI01010001010000000000000515BI0100001220 | 50 | Mtr |
| 109 | 90 | P & F Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted.,including dressing, ferruling and punching of telephone cable with krone tool etc. as required. 10 Pairs | BI01010001010000000000000515BI0100001221 | 1 | Nos. |
| 110 | 91 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) 12 Way | BI01010001010000000000000515BI0100001222 | 1 | Nos. |
| 111 | 92.01 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.\n(a) Single pole MCB 6 A to 32 A rating | BI01010001010000000000000515BI0100001223 | 24 | Nos. |
| 112 | 92.02 | (b) Four pole MCB 40 A 63 A rating | BI01010001010000000000000515BI0100001224 | 1 | Nos. |
| 113 | 93 | P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required Two pole 100/300mA sensitivity 40 A rating | BI01010001010000000000000515BI0100001225 | 3 | Nos. |
| 114 | 94.01 | P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.\n(a) 1200 mm sweep | BI01010001010000000000000515BI0100001226 | 26 | Nos. |
| 115 | 94.02 | (b) 1400 mm sweep | BI01010001010000000000000515BI0100001227 | 2 | Nos. |
| 116 | 95 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . | BI01010001010000000000000515BI0100001228 | 28 | Nos. |
| 117 | 96 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 5 step fan regulator 2 Module | BI01010001010000000000000515BI0100001229 | 28 | Nos. |
| 118 | 97 | P & F of ventilating fans, Capacitor start, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required. 250 mm sweep | BI01010001010000000000000515BI0100001230 | 3 | Nos. |
| 119 | 98 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. | BI01010001010000000000000515BI0100001231 | 3 | Nos. |
| 120 | 99 | P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). 1 X 36 Watts with EB | BI01010001010000000000000515BI0100001232 | 75 | Nos. |
| 121 | 100 | P & F Fluorscent tube rod in existing fixtures as required, Flourscent powder coated (minimum 3 star rating) 36/40 Watts | BI01010001010000000000000515BI0100001233 | 75 | Nos. |
| 122 | 101 | P & F IP-65 protected Wall mounted Bulk Head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast aluminium with UV stablized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp) | BI01010001010000000000000515BI0100001234 | 8 | Nos. |
| 123 | 102 | P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required. 13/18 watt | BI01010001010000000000000515BI0100001235 | 8 | Nos. |
AI Tender Summary
Tender Timeline
Jan 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender