Construction Of Grade-I Judicial Officer Quarter At Abhayapuri Lower Court Campus , Abhayapuri In Bongaigaon District , Assam
Tender Value
1.05 Crore
Estimated cost
Bid Submission
12 Feb 2021
0 days left
EMD
2.11 Lakhs
Bank guarantee accepted
Document Fee
5300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Abhayapuri → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Grade-I Judicial Officer Quarter At Abhayapuri Lower Court Campus , Abhayapuri In Bongaigaon District , Assam
BOQ
| Name of Work: Construction of Grade-I Judicial Officer Quarter at Abhayapuri Lower Court Campus, Abhayapuri in Bongaigaon District, Assam | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing cast in-situ manually driven reinforced cem,ent concrete piles of using required grade of cement concrete of required bore diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings Reinforcement to be measured and paid separately as per item no. 21.4.1.)(C) UNIFORM PILES)(d) pile dia 400mm (ii) Above 10 M | item1 | 630 | Rm |
| 2 | 2 | Extra boaring specified dia metre pile in high sub soil water level requiring use of drilling mud and extra cement.(iii)400mm dia | item2 | 630 | Rm |
| 3 | 3 | Supplying fitting and fixing in position reinforcement bars conforming to relevent I.S. code for RCC works in piles including straightening, cleaning,cutting and bending to proper shapes and length as per specification and drawings. The rings should be welded with verticatereinfocements as per specified I.S codes of practice (Inclusive of lap, length, hook, chair, bend,anchor. etc) | item3 | 78.91 | Qtl. |
| 4 | 4 | RoutIne test for test boaring to1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test.(Rate for safe working load) | item4 | 24 | Ton |
| 5 | 5 | Integrity testing of pile using Low strain/ Sonic integrity Test/ Sonic Echo Test method in accordance with IS 14893 incuding surafce preparation of pile top by removing soil,mud,dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission ofresults all complete asper direction of Engineer - in- charge. | item5 | 5 | Each test |
| 6 | 6 | Earth work in excavation for foundation trenches of walls,ratingin walls,footings of columns ,steps, septic tank etc. Including refilling (return filling) the qunantity as necessary after completion of work breacking clods in return filling, dressing, watering, and ramming etc. and removal of surplus earth with all lead and lifts .as directed and specified. in the following clssificatonj of soils including bailing out water whw5re necessary as directed and specified (A) Upto a depth of 2.00 m below the existing G.L. (a) In ordinary soil | item6 | 98.89 | Cum. |
| 7 | 7 | Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering , ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary . (c) With river sand or silt (Predominantly non plastic by truck carriage loading and unloading. | item7 | 81.915 | Cum. |
| 8 | 8 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32 mm in foundation bed for footing steps,walls., brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately) (a) In prop 1 cement:3sand : 6 coarseaggregate by volume. | item8 | 14.651 | Cum. |
| 9 | 9 | Providing and laying 25mm thick damp proof course with cement concrete in prop 12:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item9 | 21.97 | Sqm. |
| 10 | 10 | Providing and laying plain/ reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering in necessary , and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) for reinforced cement (I) using Mixer Machine (A) In Substructure upto plinth level. Foundation, footing, columns, with base tie abd plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level. (p) Using admixture, plasticiser etc. for air entraining etc. (a) M-20 grade cocrete or prop 1:1.5:3 | item10 | 72.085 | Cum. |
| 11 | 11 | (B) In super structure from plinth level upto Ist floor level. (ii) Column, Pillars, Posts, Struts, suspended floor roof landing, shelf and support, balcony, lintel, sill band beam girder, bressumer, cantilever, stair case etc. (P) Without using admixture, Plasticiser (b) M20 grade concrete or prop 1:1.5:3. | item11 | 101.865 | Cum. |
| 12 | 12 | Providing and laying plain/ reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering in necessary , and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) for reinforced cement (B) In super structure from plinth level upto Ist floor level. (ii) Column, Pillars, Posts, Struts, suspended floor roof landing, shelf and support, balcony, lintel, sill band beam girder, bressumer, cantilever, stair case etc. (P) Without using admixture, Plasticiser (a) M15 grade concrete or prop 1:2:4 | item12 | 3.37 | Cum. |
| 13 | 13 | Supplying fitting and fixing in position reinforcement bars conforming to relevent I.S. code for RCC work/RB walling including straightening, cleaning,cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black, wire and placing in position with proper blocks supports,chairs, spacersetc. (N0 extra measurement for lap, hook, chair,amcjore etc. will be entertained in the measurement as they are included in the rate )(Upto 1st floor level) (a) From Primary Producer TATA/SAIL/Esser steel/Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel. etc. | item13 | 260 | Qtl. |
| 14 | 14 | Supplying fitting and fixing in position reinforcement bars conforming to relevent I.S. code for RCC work/RB walling including straightening, cleaning,cutting and bending toproper shapes andlengthasper details, supplyingandbindingwith 20G annealed black wire and placing in position with proper blocks supports. chairs, spacers etc. complete ( No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) ( Upto 1st floor \n(ii) super Duclite (SD) TMT reinforcement bars. | item14 | 4.15 | Qtl. |
| 15 | 15 | Providing form work ofordinary timber planking so as to give a rough finish including centering shuttering, strutting and proping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.M and removal of the same for in-situ reinforced concrete and plain concrte work in. \n3.1.1.1 Foundation , footings, bases of columns, pilecap , raft and mass concrete works etc. (b) Using 25mm thick | item15 | 42.8 | Sqm. |
| 16 | 16 | 3.1.1.2 Sides of tie beams,grade beams etc. at or below ground level (b) using 25mm thick plank. | item16 | 91.15 | Sqm. |
| 17 | 17 | Columns, pillars, posts& strut. (a) Square, Rectangular,polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank. | item17 | 276.36 | Sqm. |
| 18 | 18 | Sides and soffits of Beams, beam haunchings, cantilever girders, Bressumers, lintel and Horizentakl ties (a) For depth not exceeding 1.0M (ii) using 25mm thick plank. | item18 | 365.95 | Sqm. |
| 19 | 19 | Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs chajjahs, balconies and the like. (a) Floors etc. upto 200mm in thickness (ii) Using 25mm thick plank. | item19 | 448.75 | Sqm. |
| 20 | 20 | Vertical ties, sun breakers, louvers. Bands, dropwalls.etc. | item20 | 20.36 | Sqm. |
| 21 | 21 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing using 38mmthick plank) | item21 | 44.063 | Sqm. |
| 22 | 22 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick sand packed and laid to level and in panel after preparing thesubgrade as directed including all labour and materials and if necessary dewatering complereif necessary dewatering complete. Brick flat soling | item22 | 210.42 | Sqm. |
| 23 | 23 | Brick on edge soling | item23 | 82.4 | Sqm. |
| 24 | 24 | stone soling of thickness 150mm | item24 | 27.82 | Sqm. |
| 25 | 25 | Brick work in cement mortar with ist class brick including racking out joints and curing complete as directed. In sub structure upto plinth level including dewatering if necessary(c) In Prop 1:5 | item25 | 40.292 | Cum. |
| 26 | 26 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as diretected in super structure above plinth upto 1st floor level (Protruding M.S. rod/Torsteelof column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall\nIn cement mortar in prop 1;4 (1 cement : 4 sand) | item26 | 739.01 | Sqm. |
| 27 | 27 | Providing wood work in frame (Chowkaths) of doors,Windows clerestory windows and other similar works wrought framed and fixed in position in contact with C.C. or brick masonry wall including supplying fitting and fixing with M.S. hold fast (40mmx3mmx250mm) asper design embeded in cementconcrete blockin proportion 1:2:4 and withtwo coats ofkiricide oilingto the timer faces in contact withC.C. and masonry as directed and specified. With sal wood. | item27 | 2.875 | Cum. |
| 28 | 28 | Providing fitting and fixing factory made santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (Chowkath) with necessary hinges,Screws, bolts etc. as specified and directed at all levels (Door fixtures and fittngs to be measured and paid separately) 35mm thick | item28 | 31.386 | Sqm. |
| 29 | 29 | Providing fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDOLCO /NALCO/ BALCO/ JINDAL/ other equivalent proimery producer) without horizontal glazing bars, joints mitred and welded (manufactured to relevent IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangement, screws etc. as required complete as specified and directed for all levels.(a) 2 Track sliding window 5mm frosated glass. | item29 | 24.64 | Sqm. |
| 30 | 30 | Providing fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, sqiuare or round M.S. bars with round headed bolts and nuts or screws. Plain grill Fixed to wooden frames. | item30 | 918.73 | Kg. |
| 31 | 31 | Providing fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, sqiuare or round M.S. bars with round headed bolts and nuts or screws. Plain grill © Fixed to Brick work /P.C.C/R.C.C | item31 | 405.45 | Kg. |
| 32 | 32 | 15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level ioncluding arises , internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. . On fair side In cement mortar 1:4 | item32 | 1071.94 | Sqm. |
| 33 | 33 | 15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level ioncluding arises , internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.. On rough side In cement mortar 1:4 | item33 | 1166.69 | Sqm. |
| 34 | 34 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. Of size 13mm to 32mm including dewatering if necessary and curing etc. complete 50mm thick | item34 | 467.16 | Sqm. |
| 35 | 35 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors skirtings, risers and treads of steps over 15mm thick base of cement mortar in prop 1:3 ( 1 ccement : 3coarse sand )including cutting where necessary finished withflush pointing with fix- A Tile ( Choksey /Sika/ Pedelite/Rouf) white cement slurry mixed with approved pigmnt to match the shade of the tiles,complete atall levels as specified and directed ( Coloured pigment should be in conformity with colour of tiles and as approved and directed by the departmenty) Executive range. of size 800mmx800mm and above. | item35 | 467.16 | Sqm. |
| 36 | 36 | Providing VITRIFIED wall tiles of approved quality size, shape and thickness not less than 8mm on walls skirtings, over cement mortar bed 10mm thick base of cement mortar in prop 1:3 ( 1 ccement : 3coarse sand )including cutting where necessary finished with flush pointing with fix- A Tile ( Choksey /Sika/ Pedelite/Rouf) white cement slurry mixed with approved pigmnt to match shade of tiles,complete at all levels as specified and directed ( Coloured pigment should be in conformity with colour of tiles and as directed by the departmenty) Ofsize 300mmx450mmand above. | item36 | 45.07 | Sqm. |
| 37 | 37 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor,skirting over a cement mortar bed 15mm thick of 1:3 ( 1 cement :3 coarse sand) approved make fix with Fix -A -Tiles (Choksey/ Sika/ Pedelite/ Rouf) white cement complete at all level as specified and directed. ii) Executive range -1(Sizes 600mmx600mm and above) Nitco made (oak wood) | item37 | 40.21 | Sqm. |
| 38 | 38 | Providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika/ Pedelite / Rouf ) white cement slurry) mixed with approved pigment to match shade of tiles complete at all levels as specified and directed (Cement plastering to measured and paid separately) (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department) (Walls means both interior and exterior walls ) | item38 | 30.36 | Sqm. |
| 39 | 39 | Cement plaster skirting with cement mortar in prop1:3 (1 ceent : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. 15 mm thick | item39 | 40.85 | Sqm. |
| 40 | 40 | Supplying fitting and fixing brass fittings of approved make reasonably smooth, free from sharp edges and corners flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete (bright natural mett & satin finished) (a) Sliding door bolts 300mmx16mm | item40 | 28 | Each |
| 41 | 41 | Supplying fitting and fixing brass fittings of approved make reasonably smooth, free from sharp edges and corners flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete (bright natural mett & satin finished) Tower Bolt 250mmx10mm. | item41 | 74 | Each |
| 42 | 42 | Supplying fitting and fixing brass fittings of approved make reasonably smooth, free from sharp edges and corners flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete (bright natural mett & satin finished) Tower Bolt 100mmx10mm. | item42 | 5 | Each |
| 43 | 43 | Supplying fitting and fixing brass fittings of approved make reasonably smooth, free from sharp edges and corners flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete (bright natural mett & satin finished) Door handle 100mm | item43 | 56 | Each |
| 44 | 44 | Supplying fitting and fixing brass fittings of approved make reasonably smooth, free from sharp edges and corners flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete (bright natural mett & satin finished) Gate Shutter hook and eye 250mm | item44 | 28 | Each |
| 45 | 45 | Supplying fitting and fixing brass fittings of approved make reasonably smooth, free from sharp edges and corners flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete (bright natural mett & satin finished) (n) Matice lock vertical type 75mm | item45 | 3 | Each |
| 46 | 46 | Pre-Construction anti- termite treatment in the back fill in immediate contact with the foundation structure after completion, column,wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emultion@ 5 (five) litres per square metre towards the concrete and masonry wall so as to ensure earthin comtact with the structure wall treated with chemical (Supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. With aqueous emulsion having concentration 1:19 with chloropirophose solution (Tricel orequivalent and water)i.e.1% Solution. | item46 | 129.5 | Sqm. |
| 47 | 47 | Pre-Construction anti- termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @5 (five) litres per square metre of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (Supplying of necessary tools and accessories by the contractor) as per the direction of thE Department complete. With aqueous emulsion having concentration 1:19 with chloropirophose solution (Tricel or equivalent) and water i.e.1% solution. | item47 | 101.32 | Sqm. |
| 48 | 48 | Pre-Construction anti- termite treatment by applying in soilalong the external perimeter of the building (after construction completed)to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mmapart to a depth 300mm and applying emulsion @ 4.5litres per running meter ensure moistening of the soil with emulsion (Supplying of necessary tools and accessories by the contractor) as per the directeion of the Department complete. With aqueous emulsion having concentration 1:19 with chloropirophose solution (Tricel or equivalent) and water i.e.1% solution. | item48 | 47.6 | Sqm. |
| 49 | 49 | Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth | item49 | 2034.81 | Sqm. |
| 50 | 50 | Providing two coats of Birla white wall care putty (Water resistant white cement based putty for concrete/mortar walls and ceiling both internal and external) after removing all loosely adhereing materila from the wall surface with the help of emery stone, putty blade of wire brush and moistening the wasll with sufficient quantity of clean water as specified and directed by the DEPARTMENT ( Total thickness of two coats is maximum 1.5mm) | item50 | 532.12 | Sqm. |
| 51 | 51 | Finishing old/new wall with water proofing weather coat smoothanti- fungalexterior paintingofApex brand of Asianpaints and ofrequiredshade afetr cleaning and clearing the surface etc. including scaffolding complete as directed at alllevels( two coats) | item51 | 666.32 | Sqm. |
| 52 | 52 | Wall painting ( two coats) with plaster emulsion paint of approved brand and manufacture (Asian Paint / Berger Paint/ ICI paint) j&N.Paint) /Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from morterdropping and other foreign matter and sand papered smooth. | item52 | 436.97 | Sqm. |
| 53 | 53 | Distempering two coats with oil bound distemper of approved brand and manufacture and of required shadeon new wall surface to give an evenshade,over and including a priming coat with disremper primer of approved brand and manufacture after throughly brooming the surface,free from mortar droop ingsand other foreign matter and including preparing surface even and sand papered smooth. Primingcoatwithdistempering primer. | item53 | 439 | Sqm. |
| 54 | 54 | Top Coats. | item54 | 439 | Sqm. |
| 55 | 55 | Finishing wall with two coats of acrylic emulsion wxterior coatings of approved brand of required shade by thinning 1 ltr. Of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the deptt. | item55 | 390.72 | Sqm. |
| 56 | 56 | Supplying fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x6mm M.S. flat iron with another horizontal flat at the middle , 20mm dia M.S. bars at 200mm apart from bottom flat to top flat and 20mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling welding etc. complete . All verticla bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary lockiing arrangement on both faces arrangement for temporary closing the gate and 2 nos ( minimum) strong iron hinges of M.S. bars and flat of same sizes on leaf to be embeded in C.C. brick pillars as necessary including a red oxide painting top all iron works as directed and specified (separate payment .) | item56 | 6.78 | Qtl. |
| 57 | 57 | Providing rails for plying of rollers of gate made made from 50mmx6mm size M.S. flat and to be fited with 3 nos of himged hold fasts to be embedded in concrete prop 1:2:4 of 10mm wide and 75mm deep over brick flat soling 250mm wide icluding curing etc. complete | item57 | 12 | RM |
| 58 | 58 | Providing roller to the gate including welding by with 12.50mmx50mm ( dia ) roller. | item58 | 6 | Nos. |
| 59 | 59 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/ width after and including preparing the surface by throughly cleaning oil, grease, sirtandother foreign matter sand papering and knotting. With ready mixed paint- wood primer (pink) | item59 | 48.94 | Sqm. |
| 60 | 60 | Applying priming coat over new steel and other metalsurface over 100m in width or girth after preparing the surface by throughly cleaning oil, grease, sirtandother foreign matter sand papering and knotting. With ready mixed ''red lead/ redoxide' primer | item60 | 128.7 | Sqm. |
| 61 | 61 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamal paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/J&Npaint/ Nerolac) to givean even shade includingcleaning the surface of alldirt,dustandother foreign matter sand papering and stopping. surfaces over 100mm in width or girth (b) High gloss | item61 | 48.94 | Sqm. |
| 62 | 62 | Painting two coats (excluding priming coat) on new steeland othermetal surface with enamal paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/J&Npaint/ Nerolac) to givean even shade includingcleaning the surface of alldirt,dustandother foreign matter sand papering and stopping (I) surfaces over 100mm in width or girth (b) High gloss | item62 | 128.7 | Sqm. |
| 63 | 63 | Providing and fixing in position collapsible M.S. Sq.m. Rs. 4245.50 shutter with vertical channels 20mm x10mm x2mm braced with flat iron diagonals 200mm x5mm size with top and bottom nails of T-iron 40mm 40mmx6 mm with 38mm dia s teel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying apriming coat of red lead paint. | item63 | 8.82 | Sqm. |
| 64 | 64 | providing precast RCC slab over drain septic tank etc. in prop 1:3:6 reinforced with 10mm M.S.bar @ 150mm centre both ways tying with 20 gauge black anealed wire with necessary shuttering, curing etc. Complete including fixing in position as directed. 100 mm thic. slab | item64 | 16.05 | Sqm. |
| 65 | 65 | Supply installation fixing of CARBON Di Oxide Fire Extinguisher confirming to IS 2878 with ISI Mark ( Extinguisher Will be TROLLY MOUNTED)(9 KG) BRAND : FIRESTOP/ FIREND/FIRE SHIELD. | item65 | 1 | Each |
| 66 | 66 | Supplying and dibbing of selected lawn grass I door grass (Cynodon dactylon), cushion grass (Axonopus affinis) after preparing the laid by plouging/ working to a depth of 40-45 cm, removing of all unwanted debris (Rubbies, pebbles, plant roots etc.) mixing of organic manure (10kg-15kg/sq.m.) levelling the surface and initial maintenance by proper and periodic rolling, nowing and irrigation etc. ( as specified) for a period of six months from the date of dibing including the apprication of recommended dose of fertilizers (N:P:k) mixture as specified and directed by the department. | item66 | 132.17 | Sqm. |
| 67 | 67 | Jungle clearance including uprooting of vegitation, grass, brush- wood, sapling and trees not exceeding 300mm girth and disposal of the same out side the periphery and lift upto1500mm. | item67 | 695.55 | Sqm. |
| 68 | 68 | Cutting down trees where the building is to be constructed of girth exceeding 300mm. Grubbing up roots, filling pits and levelling off ground lopping branches, trimming and removing to distance beyond 30m ans tacking serviceable materials and cleaning site etc. as directed. Girth exceeding 1500mm but not exceeding 2000m. | item68 | 8 | Each |
| 69 | 69 | Providing and fixing stainless steel(Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i.e. fixing the railing with necessary accessoriess & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per appropval Engineer in charge.(For payment only weight of stainless steel member is to be considered. No estra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered). | item69 | 83.55 | KG. |
| 70 | 70 | Demolishing RCC work including stacking of steel bars and disposal mof unserviceable materials as directed for all levels. | item70 | 0.67 | Cum. |
| 71 | 71 | RCC Approach Road and pavers. Construction nof Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density. complete as per Clause 40.1 of MoRTH specification s (With an initial lead of 5 km) ( including cosat of testing of materials at site and laboratory as directed by the deptt.) Using grading I materials | item71 | 51.96 | Cum. |
| 72 | 72 | Using Grading II material | item72 | 51.96 | Cum. |
| 73 | 73 | Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28days compressive strength not less than 30N/m over a layer of bending sand of conpacted thickness 30mm, laid either if stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restrait wherever required complete as per drawings and technical specificatuion clause 1504 of MORD. | item73 | 346.41 | Sqm. |
| 74 | 74 | Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) \nBRAND: FIRESTOP / FIREND / FIRESHIELD/GETECH/MINIMAX | item74 | 1 | Each |
| 75 | 75 | Sanitary and water suppl;y woorks. Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C. Orissa pattern) with all fittings and fixtures complete including cutting and making good to the wall sand floors where ever required Flushing cistern to be paid separately) Indian typeW.C.orissapattern of size 580x440mm oloured Hindware make | item75 | 4 | Each |
| 76 | 76 | Providing fitting and fixing vitreous China padestal type water closet European type W.C. pan 400 mm high) with seatand lead CP brass hinge sand rubber buffers, CI/MS brackets 40mm dia flushb and with fittings including painting of fittings and brackets,required (Flushing cisternto be paidseparately) Hindware make coloured water closet UNIVERSAL P (Cat No. C20012) (inclusive of seat cover) | item76 | 5 | Each |
| 77 | 77 | Supplying fitting and fixing concealed cistern with all internal fittings with CI brackets including fitting & fixing standard sizes CP flush pipe, union clamps etc. complete as directed and specif(B) Hindware make. Concealed Cistern 83mm wityhprime flush plate 83mm. | item77 | 9 | Each |
| 78 | 78 | Providing fitting and fixing vetreous china flat back type lipped front urinal basin with stamndard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. Hindware make coloured. FB 610 x410x380(Cat No. 60002) | item78 | 6 | Each |
| 79 | 79 | Providing fitting and fixing vetreous china wash basin with CI/MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required.(Pillar coak, stop cocks, waste coupling are to be paid separately) Padestal basin ( With padestal) Hindware make Coloured CEDER 570X440 (Cat n0. 91049/91115) | item79 | 5 | Each |
| 80 | 80 | Providing fitting and fixing vetreous china wash basin with CI/MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required.(Pillar coak, stop cocks, waste coupling are to be paid separately) basin ( With out padestal) Hindware make Coloured Standard 630x450 (cat No. 10001) | item80 | 3 | Each |
| 81 | 81 | Providing fitting and fixing Stainless steel kitchen sink of parryware make with CI/MS brackets. CP brass chain with rubber plug PVC waste pipe etc. complete including painting cutting & making good the walls wherever required.( sink coak, stop cocks, waste coupling are to be paid separately) Parryware make Single bowl with Veg Bowl drain Board (400x200) Flat Edge-Glossy (Cat N0. C 8545) | item81 | 1 | Each |
| 82 | 82 | Providing fitting and fixing decorative Mirror Complete as directed and specified. Parry ware make Size 600x450mm | item82 | 9 | Each |
| 83 | 83 | Providing fitting and fixing Glass shelf complete as directed and specified 1.20.1. Glass shelf with C.P. guard rail.. Agmeco make Cubin (cat No. CB-00104) | item83 | 5 | Each |
| 84 | 84 | Providing fitting and fixing C.P. soap tray/ soap dish Complete as directed and specified (ii) Agmeco make Cubin (cat No. CB-00102) | item84 | 6 | Each |
| 85 | 85 | Providing fitting and fixing C.P. Towel ring Complete as directed and specified Agmeco make Cubin (cat No. CB-00101) | item85 | 6 | Each |
| 86 | 86 | Providing fitting and fixing C.P. Brush holder Complete as directed and specified Jaquare make Kubix (Cat. No. AKB.35743) | item86 | 6 | Each |
| 87 | 87 | Providing fitting and fixing C.P. TOILET PAPER holder Complete as directed and specified Agmeco make Cubin (Cat. No. CB.00001) | item87 | 6 | Each |
| 88 | 88 | Providing fitting and fixing C.P. Waste coupling Complete as directed and specified Jaquar make 32mm (HT/FT) ( Cat No. ALD-705/709) | item88 | 3 | Each |
| 89 | 89 | Supplying fiting and fixing PVC pipes of 6 kg/cm2 (supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as nwecessary complete at all levels including below G.L as directed and specified. In exposed surfaces or in trenches. 110mm dia | item89 | 10 | Each |
| 90 | 90 | 75mm dia | item90 | 10 | Each |
| 91 | 91 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. 110mm dia | item91 | 7 | Each |
| 92 | 92 | 75mm dia | item92 | 5 | Each |
| 93 | 93 | Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved icnluding joimning fitting and fixing etc . As necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 110mm dia | item93 | 8 | Each |
| 94 | 94 | 75mm dia | item94 | 6 | Each |
| 95 | 95 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. 110mm dia | item95 | 5 | Each |
| 96 | 96 | 75mm dia | item96 | 5 | Each |
| 97 | 97 | Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved icnluding joimning fitting and fixing etc . As necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 110mm dia | item97 | 6 | Each |
| 98 | 98 | 75mm dia | item98 | 6 | Each |
| 99 | 99 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. 110mm dia | item99 | 4 | Each |
| 100 | 100 | 75mm dia | item100 | 3 | Each |
| 101 | 101 | Supplying fitting and fixing PVC Plain single TEE of (Supreme/Prince) or other ISI approved icnluding joimning fitting and fixing etc . As necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 110mm dia | item101 | 5 | Each |
| 102 | 102 | 75mm dia | item102 | 4 | Each |
| 103 | 103 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. 110mm dia | item103 | 5 | Each |
| 104 | 104 | 75mm dia | item104 | 4 | Each |
| 105 | 105 | Supplying fitting and fixing PVC Reducer of (Supreme/Prince) or other ISI approved icnluding joimning fitting and fixing etc . As necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 110mm x75mm | item105 | 4 | Each |
| 106 | 106 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. 110mm x75mm | item106 | 4 | Each |
| 107 | 107 | Supplying fitting and fixing PVC Reducing TEE of (Supreme/Prince) or other ISI approved icnluding joimning fitting and fixing etc . As necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 110mm x75mm | item107 | 4 | Each |
| 108 | 108 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. 110mm x75mm | item108 | 4 | Each |
| 109 | 109 | Providing fitting and fixing PVC Cowel of ISI make complete as directed and specified.(75mm dia PVC Cowel of ISI Make | item109 | 7 | Each |
| 110 | 110 | Providing fitting and fixing 450mm dia 90mm thick C.I. Man hole cover ansd frame of 25kg weight complten as directed and specified. | item110 | 3 | Each |
| 111 | 111 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diametre HCI/PVC pipes and cement comcrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in preparation 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall amd floor 450mmx 450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item111 | 3 | Each |
| 112 | 112 | Water supply works Supplying fitting and fixing approved uPVCs of different sizes, with all necessary 'R' brand or similar approved uPVC fittings such as band, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/PRINCE/SFMC brand or other equivalent approved brand (High pressure p[ipe Sch-Exposed or in trenches 50mm dia( Medium). Using TATA make / | item112 | 25 | RM |
| 113 | 113 | 40mmdia G.I. pipe using TATA make. | item113 | 35 | RM |
| 114 | 114 | 32mm dia | item114 | 39 | RM |
| 115 | 115 | 25mm dia | item115 | 42 | RM |
| 116 | 116 | 20mm dia | item116 | 58 | RM |
| 117 | 117 | 15mm dia | item117 | 53.07 | RM |
| 118 | 118 | Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damaged structure . SUPREME/PRINCE/SFMC brand or other equivalent approved brand (High pressure p[ipe Sch-40) 32mm dia | item118 | 25 | RM |
| 119 | 119 | 25mm dia | item119 | 37.5 | RM |
| 120 | 120 | 20mm dia | item120 | 46 | RM |
| 121 | 121 | 15mm dia | item121 | 54.44 | RM |
| 122 | 122 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified (G.I. & C.P. pipes will be measured separately) (II) Jaquare make (a0 Continental /Clarion (ii) Bibcock long thread. | item122 | 9 | Each |
| 123 | 123 | Supplying fitting and fixing Crome Plated (C.P) stop cock of approved brand and size as mentioned below as directed and specified (G.I. & C.P. pipes will be measured separately) (I) Jaquare make (a0 Continental /Clarion (iv) 15mm dia (concealed stop cock reduced body) | item123 | 9 | Each |
| 124 | 124 | Supplying fitting and fixing Crome Plated (C.P) pillar cock of 15mm dia of approved brand as specified and directed (I) Jaquar make (a)Continental | item124 | 6 | Each |
| 125 | 125 | Supplying fitting and fixing Crome Plated (C.P) sink cock of approved brand as directed and specified (G.I. & C.P. pipes will be measured separately) (V) Jaquar make (a)Continental (ii) sink cock raised 'J' shapped swinging spout. | item125 | 1 | Each |
| 126 | 126 | Supplying fitting and fixing Crome Plated (C.P) flush cock of approved brand as directed and specified (G.I. & C.P. pipes will be measured separately) (III) Jaquar make (a)Continental/Clarion (i) flush cock with wall flange 25mm size with lever handle. | item126 | 4 | Each |
| 127 | 127 | Supplying fitting and fixing Crome Plated (C.P) shower 15mm dia of approved brand as directed and specified ( pipes will be measured and paid separately ) (III) Jaquar make (a)Continental(iii)Pressure adjusrable Shower with revolving joint. | item127 | 3 | Each |
| 128 | 128 | Supplying fitting and fixing Telephonic Crome Plated (C.P) shower of approved brand as directed and specified ( pipes will be measured and paid separately ) (III) Jaquar make (a)Continental (i) Telephonic Shower 2 in 1 shower with massage effect with 1.5m PVC tube and swinging wall hook. | item128 | 3 | Each |
| 129 | 129 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes Scafolding , tools and plants as necessary and taking out the same and lowering pipes fittings complete as directed by the deptt. etc. As directed (iv) Bore hole of 150 mm diametre. | item129 | 87 | RM |
| 130 | 130 | Supplying fitting and fixing pipes plain/bevel ended for casing conforming to relevant IS codes of practice including supplying and fitting of tube well accessories. Lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular spacve between the borehole and assembly pipes complete as directed by the department. (II) PVC Pipe SUPREME/PRINCE/FUSION/SFMC Breand ( 140mm diametre. | item130 | 87 | RM |
| 131 | 131 | Supplying fitting and fixing suction pipes plain/ bevel ended. Conforming to relevant IS code of practice including supplying and fitting of accessories lowering of assembly pipes concentrically in the casing pipes complete as directed.(A) G.I. Pipe (a) TATA /SAIL (iii) 40mm dia | item131 | 60 | RM |
| 132 | 132 | Supplying fitting and fixing GI filter 2.00 metre long . | item132 | 3 | Each |
| 133 | 133 | Development of the tube well with compressor or by over pumping unit for 48hours till sand free discharge is obtained. | item133 | 1 | Job |
| 134 | 134 | Labour for test boring with 40mm (internal) dia G.I. pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest PWDcamp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contactor at his own cost) | item134 | 55 | RM |
| 135 | 135 | Supplyinmg and placing plastic cylindrical vertical claused top (PCVC) tank of sintex/Polycon/ pattern make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. (III) 1000 litre capacity (a) sintex make. | item135 | 2 | Each |
| 136 | 136 | Labour for erecting and placing PCVC Tank over the stagging upto a height of 5.00 m to 8.00 mcapacity as directed. 1000 lite capacity. | item136 | 2 | Each |
| 137 | 137 | Supplying fitting and fixing check valve (non return valve) including thread to pipes 40mm diameter. | item137 | 1 | Each |
| 138 | 138 | Electrical works. Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1.1 Short point up to 3.00 metre. length. | item138 | 16 | Each |
| 139 | 139 | 2.1.2 Medium point up to 6.00 metre. Length. | item139 | 48 | Each |
| 140 | 140 | 2.1.3 Long point up to 10.00 metre. Length. | item140 | 40 | Each |
| 141 | 141 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. 2.2.2 Medium point up to 6.00 metre. Length. | item141 | 3 | Each |
| 142 | 142 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.4.1 Extra long point up to 15.00 metre. length. \n | item142 | 1 | Each |
| 143 | 143 | Extra long point up to 20.00 metre. Length. | item143 | 2 | Each |
| 144 | 144 | Extra long point up to 25.00 metre. Length. | item144 | 2 | Each |
| 145 | 145 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1With 2x2.5 sq.mm. +eqrth continuity with 1x1.5sq. Mm. in 20mm dia 2mm thick/ heavy rigid PVC IS : 9537 Part -III Conduit. | item145 | 455 | Metre |
| 146 | 146 | With 2x4 sq.mm. +earth continuity with 1x 2.5 sq. mm. Cable 20mm dia 2 mm thick / heavy rigid PVC IS : 9537 Part -III Conduit. | item146 | 5 | Metre |
| 147 | 147 | With 2x6 sq.mm. +earth continuity with 1x4 sq. mm. Cable 25mm dia 2 mm thick / heavy rigid PVC IS : 9537 Part -III Conduit. | item147 | 45 | Metre |
| 148 | 148 | With 2x10 sq.mm. +earth continuity with 1x6 sq. mm. Cable 25mm dia 2 mm thick / heavy rigid PVC IS : 9537 Part -III Conduit. | item148 | 35 | Metre |
| 149 | 149 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. 2.9.5 With 2x16 sq.mm. +earth continuity with 1x10 sq. mm. Cable 40mm dia 2 mm thick / heavy rigid PVC IS : 9537 Part -III Conduit. | item149 | 50 | Metre |
| 150 | 150 | SSupplying and fixing of Switch/Socket flush type (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing PVC/ MS board including connection as approved by the Deptt.)complete as required. | item150 | 54 | Each |
| 151 | 151 | Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required. | item151 | 2 | Each |
| 152 | 152 | Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt. 13.1.1 20A Capacity. (ABB, Schneider MG, legrand, Hager make) | item152 | 3 | Each |
| 153 | 153 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.2.1 ABB, Schneider MG, legrand, Hager make) 15.2.1.1 4 way SPN double door | item153 | 1 | Each |
| 154 | 154 | 8 way SPN double door | item154 | 1 | Each |
| 155 | 155 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.20.1 ABB, Schneider MG, legrand, Hager make) 15.20.1.3 12 way TPN (8+36) double door | item155 | 1 | Each |
| 156 | 156 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.3 3. D Series\n(ABB, Schneider MG, legrand, Hager make) 16.1.3.1 6 to 32 A | item156 | 1 | Each |
| 157 | 157 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.3.3 3. D Series\n(ABB, Schneider MG, legrand, Hager make) 16.3.3.1 6 to 32 A | item157 | 10 | Each |
| 158 | 158 | 40 A | item158 | 4 | Each |
| 159 | 159 | 63 A | item159 | 4 | Each |
| 160 | 160 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.6.2. C Series (ABB, Schneider MG, legrand, Hager make) 16.6.2.5 100 A | item160 | 2 | Each |
| 161 | 161 | Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.17.1 35/ 36 KA 415 V 50Hz 4P MCCB (Schneider, legrand, Siemens make)v 16.17.1.1 160 A | item161 | 1 | Each |
| 162 | 162 | Supplying with fitting and fixing Four Pole 415V Front handle operated open execution On Load Change over switch fitted on the existing cubical panel of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.45. 1 C&S, Havells, Indo Asian, HPL, GECO make) 16.45.1.3 125 A | item162 | 1 | Each |
| 163 | 163 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm4 strip copper Bus-Bar 0.6 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no 5. Voltmeter & Ammeter Selector Switch - 2 no 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | item163 | 1 | Each |
| 164 | 164 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item164 | 3 | Each |
| 165 | 165 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item165 | 3 | Each |
| 166 | 166 | Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item166 | 25 | Metre |
| 167 | 167 | Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].. 27.1.3 Premium model 1400 mm Sweep. (ORIENT PSPO make) /Premium model 1400 mm Sweep SS-390 Deco. Havells make) | item167 | 14 | Each |
| 168 | 168 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. 27.2.1.11 Ventil Air DB 230 mm sweep (Havells make) | item168 | 10 | Each |
| 169 | 169 | Supplying with fitting and fixing of Angle iron framing made 50 mmx50 mmx5 mm size angle iron for accommodation of 1.00 Ton to 2.00 Ton Window/split type A.C. Machine | item169 | 2 | Each |
| 170 | 170 | Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. 30.11.2 Overload Relay Range 6.0 -9.3 Amps for 3.7 KW | item170 | 1 | Each |
| 171 | 171 | Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 31.1.7 4.0 KVA Automatic Input 90-280 V Out put 200-240 V | item171 | 1 | Each |
| 172 | 172 | Copper pipe including cable fitting ( 1/4, 1/2, 5/8) | item172 | 3 | Metre |
| 173 | 173 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 32.1.1 2 Core A2XWaY A2XFaY 32.1.1.3 10.00 Sq.mm 2 Core armoured U.G. cable | item173 | 50 | Metre |
| 174 | 174 | 3& 1/2 Cire A2 XFY 32.1.3.2 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item174 | 60 | Metre |
| 175 | 175 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 32.5.1 Core - 2 A2XWaY A2XFaY 32.5.1.3 10.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe | item175 | 6 | Metre |
| 176 | 176 | Core - 3 & 1/2 A2XWY A2XFY 32.5.3.2 35.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) | item176 | 6 | Metre |
| 177 | 177 | Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 34.2.1. 25.00 & 35.00 Sq.mm., 3.5 Core cable. 1 Each/Set | item177 | 1 | Set |
| 178 | 178 | Supplying and fitting fixing of electric storage water heater [Geyser] of AOS-Jaquar make) including necessary connection etc. as required complete and as directed by the Department. 38.2.3. 15 Litre Capacity (Digital model) | item178 | 1 | Each |
| 179 | 179 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET, Single Phase with steel cable rope and submersible cable complete as directed and specified by the deptt. 39.6.5 Single phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 1 HP STAGE 5 to 18 with control panel. | item179 | 1 | Each |
| 180 | 180 | Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item180 | 3 | Each |
| 181 | 181 | Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item181 | 5 | Each |
| 182 | 182 | Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item182 | 15 | Each |
| 183 | 183 | Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item183 | 5 | Each |
| 184 | 184 | Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item184 | 119 | Each |
| 185 | 185 | Supplying with fitting fixing of 6/10 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item185 | 2 | Each |
| 186 | 186 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. SB. 8.13.1 1- 2 module type Metal | item186 | 12 | Each |
| 187 | 187 | 3 module type Metal | item187 | 7 | Each |
| 188 | 188 | 4 module type Metal | item188 | 4 | Each |
| 189 | 189 | 6 module type Metal 2 Each 184.00 368.00 | item189 | 2 | Each |
| 190 | 190 | 8 module type Metal | item190 | 6 | Each |
| 191 | 191 | 9 module type Metal | item191 | 6 | Each |
| 192 | 192 | 12 module type Metal | item192 | 1 | Each |
| 193 | 193 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. SB. 8.14.22 module | item193 | 12 | Each |
| 194 | 194 | 8.14.3 3 module | item194 | 9 | Each |
| 195 | 195 | 4 module | item195 | 4 | Each |
| 196 | 196 | 6 module | item196 | 2 | Each |
| 197 | 197 | 8 module 6 Each 244.00 1464.00 | item197 | 6 | Each |
| 198 | 198 | 9 module 6 Each 264.00 1584.00 | item198 | 6 | Each |
| 199 | 199 | 12 module 2 Each 273.00 546.00 | item199 | 2 | Each |
| 200 | 200 | Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item200 | 2 | Each |
| 201 | 201 | Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item201 | 3 | Each |
| 202 | 202 | Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item202 | 3 | Each |
| 203 | 203 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item203 | 16 | Each |
| 204 | 204 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. SB.8.21.1 100 watt electronic modular 4 step speed control 2 - module type | item204 | 14 | Each |
| 205 | 205 | Supplying, installation, connection, testing and commissioning of the LED bulkhead luminaires complete with all accessories on wall by providing necessary arrangement and connection with 1.5sq. mm PVC insulated S.C copper conductor as required and directed by the Deptt. 17/NEW/1 Philips 10 w, Model WT 202 WLED 65CW PSU SIPC or equivalent as approved by the Deptt | item205 | 8 | Each |
| 206 | 206 | Supplying, fitting & fixing of LED Bulb non- dimmable in the existing batten/angle holder as required and directed by the Deptt. ( Jaquar or eqvt. Make ) ( C.E approved rate ) C. Prima series Bulb 9w | item206 | 16 | Each |
| 207 | 207 | Supplying, fitting & fixing of LED Batten tube high quality aluminimum extraded with decorative end caps connection with 1.5 sq.mm 1core PVC insulated round copper conductor as required and directed by the Deptt. ( C.E approved rate ) b BN021C LED 20 SPSU CW GR S2 | item207 | 16 | Each |
| 208 | 208 | Supplying with installation 5 STAR rating inverter air conditioner machine of the following capacity Complete ( C.E approved rate ) 1.5 Ton capacity Blue Star make 1 Each 58080.00 58080.00 | item208 | 1 | Each |
| 209 | 209 | Cost of meter security & 3phase service connection charges to be deposited to the ASEB authority ( approved rate of ASEB including GST ) | item209 | 1 | Job |
| 210 | 210 | Supplying and installation of 3( three ) phase energy meterincluding testing fees ( ASEB approved rate including GST ) (Trivector Meter) | item210 | 1 | Each |
| 211 | 211 | Payment to APDCL authority for load security as per present prevailing norms of APDCL ( including GST ) ( As per APDCL Rate) | item211 | 17 | KW |
AI Tender Summary
Tender Timeline
Jan 21, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender