| 1 | 1 | Material and labour for preparation of previously treated plastered surface of wall and applying one coat of white wash on wall complete all as specified and directed. | | 60 | Sqm |
|---|
| 2 | 2 | Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed. | | 50 | Sqm |
|---|
| 3 | 3 | Material and labour for preparation of old distempered surface of wall incl washing down and stoping of distempered surface and appliying one coat of distemper oil emulsion all as specified and directed | | 80 | Sqm |
|---|
| 4 | 4 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. | | 3800 | Sqm |
|---|
| 5 | 5 | Material and labour for applying one coat of anti corrosive roof paint (corrugal) including preparation of old steel surface. | | 1200 | Sqm |
|---|
| 6 | 6 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 3800 | Sqm |
|---|
| 7 | 7 | Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. | | 50 | Sqm |
|---|
| 8 | 8 | Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even & smooth W/O using extra cement. | | 30 | Sqm |
|---|
| 9 | 9 | Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces with WPC @ 3% by weight of cement or as per manufacturers instructions.\nNote : WPC shall be measured and paid separately. | | 20 | Sqm |
|---|
| 10 | 10 | Supply only Integral water proofing compound ISI Marked. | | 6 | Kg |
|---|
| 11 | 11 | Preparing newly plastered surfaces of walls and applying three coats of white wash. | | 30 | Sqm |
|---|
| 12 | 12 | Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of chalk whiting primer all as specified and directed. | | 20 | Sqm |
|---|
| 13 | 13 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thick (below or above GL) including removing rubbish off the premises complete all as specified and directed. | | 2 | Cum |
|---|
| 14 | 14 | M & L for 50 mm thick PCC 1:3:6 type C-1 using (20mm graded aggregate) as in plinth protection/path,floor sub-base etc. including finishing the surface even and smooth without using extra cement laid in alternate panels. | | 32 | Sqm |
|---|
| 15 | 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises | | 244 | Sqm |
|---|
| 16 | 16 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate finished rough as in subbase for laying of floor tiles. | | 150 | Sqm |
|---|
| 17 | 17 | M&L for 15 mm thick screed bed in CM 1:4 finished rough for laying floor tiles. | | 100 | Sqm |
|---|
| 18 | 18 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. | | 100 | Sqm |
|---|
| 19 | 19 | M&L for 10mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces for fixing of tiles on wall, skirting/dado finished rough complete all as specified and directed. | | 50 | Sqm |
|---|
| 20 | 20 | M&L for vitrified ceramic tiles 9 to 10 mm thick dark shade tiles (square/rectangular) area of each tile exceeding 0.36sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match. | | 20 | Sqm |
|---|
| 21 | 21 | M&L for glazed ceremic tiles 200x300x7 mm in dado set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles. | | 50 | Sqm |
|---|
| 22 | 22 | M&L for 40 mm thick PCC type B-1, 1:2:4 (using 20mm graded aggregate) for rectifying tiles. | | 50 | Sqm |
|---|
| 23 | 23 | M&L for screed bed or bedding layer of 20mm thick for laying floor finish in CM 1:4.complete all as specified & directed. | | 50 | Sqm |
|---|
| 24 | 24 | M&L for coloured Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified & directed. | | 50 | Sqm |
|---|
| 25 | 25 | M&L for Sand filling under floors in foundations including watering and consolidation.\nNote : Only Punned down thickness shall be measured and paid. | | 2.5 | Cum |
|---|
| 26 | 26 | M&L for machine pressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment. | | 50 | Sqm |
|---|
| 27 | 27 | M&L for Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges including necessary formwork. | | 1.5 | Cum |
|---|
| 28 | 28 | S&F 20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl taking down old unsv one. | | 4 | Sqm |
|---|
| 29 | 29 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl taking down old unsv one. | | 20 | Sqm |
|---|
| 30 | 30 | Dismantling framed work timber scantlings 40 sq. cm and over in section, in any position. | | 0.5 | Cum |
|---|
| 31 | 31 | M&L for clean swan Second class hard-wood scantlings with framed work. | | 0.5 | Cum |
|---|
| 32 | 32 | Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil etc complete. | | 15 | Sqm |
|---|
| 33 | 33 | Dismantling of wall and ceiling boards or insulation boards any thickness, including cover fillets. | | 200 | Sqm |
|---|
| 34 | 34 | Supply and fixed 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls etc complete all as specified and directed. | | 100 | Sqm |
|---|
| 35 | 35 | Supply and fixed 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. | | 100 | Sqm |
|---|
| 36 | 36 | M&L for preparation of ply wood and wood based materials over 10 Cm width and girth and applying two coats of synthetic enamel paint over a coat of pink primer. | | 200 | Sqm |
|---|
| 37 | 37 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section exc 3 but not exc 6 sqcm , wrought secured with nails or brads. | | 100 | RM |
|---|
| 38 | 38 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings. | | 100 | Sqm |
|---|
| 39 | 39 | S&F 0.63 mm thick galvanised corrugated steel sheeting with two corrugation side lap fixed with L type or J type or cranked hooks, bolts with grade of zinc coating 275 complete all as specified. | | 80 | Sqm |
|---|
| 40 | 40 | S&F plain galvanised MS sheet sheeting 0.5 mm thick in ridges ,valley gutters, hips with grade of zinc coating 275.(Make:TATA/Sail/ Jindal) | | 20 | Sqm |
|---|
| 41 | 41 | M&L for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of red oxide roof paint( using Corrugal) over 10 cm width or girth on steel surfaces. | | 120 | Sqm |
|---|
| 42 | 42 | Taking up or down 3-layer 16mm dia PP-R Polypropylene random copolymer pipes and connections, including cleaning for re-fixing or removal to store. | | 50 | RM |
|---|
| 43 | 43 | Taking up or down 3-layer 20mm dia PP-R Polypropylene random copolymer pipes and connections, including cleaning for re-fixing or removal to store. | | 50 | RM |
|---|
| 44 | 44 | Taking up or down 3-layer 25mm dia PP-R Polypropylene random copolymer pipes and connections, including cleaning for re-fixing or removal to store. | | 20 | RM |
|---|
| 45 | 45 | S & F in repairs 3-layer 16mm dia PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.\nMake : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC | | 50 | RM |
|---|
| 46 | 46 | S & F in repairs 3-layer 20mm dia PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.\nMake : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC | | 50 | RM |
|---|
| 47 | 47 | S & Fin repairs 3-layer 25mm dia PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.\nMake : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC | | 20 | RM |
|---|
| 48 | 48 | S&F in repair for 20mm PP-R Gate valves (brass insert) as per requirement of the site.\nMake : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC\n | | 20 | Each |
|---|
| 49 | 49 | S&F in repair for 25mm PP-R Gate valves (brass insert) as per requirement of the site.\nMake : DUTRON/ FINOLEX/ TIRUPATHI/ SFMC | | 20 | Each |
|---|
| 50 | 50 | Taking down steel tubing and connections ,including cleaning for refixing or removal to store 15mm dia pipes. | | 20 | RM |
|---|
| 51 | 51 | Taking down steel tubing and connections ,including cleaning for refixing or removal to store 20mm dia pipes. | | 20 | RM |
|---|
| 52 | 52 | S&F 15mm dia tube light grade galvanised,with all fittings laid in trenches. \nNote : Earthwork shall be measured and paid separayely. | | 20 | RM |
|---|
| 53 | 53 | S&F 20mm dia tube light grade galvanised,with all fittings laid in trenches. \nNote : Earthwork shall be measured and paid separayely. | | 20 | RM |
|---|
| 54 | 54 | S & F in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest including lime concrete bedding. | | 5 | Each |
|---|
| 55 | 55 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) | | 7 | Each |
|---|
| 56 | 56 | S&F for PVC connections 15mm size with PTMT nuts of length 600mm. | | 120 | Each |
|---|
| 57 | 57 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers | | 5 | Each |
|---|
| 58 | 58 | S&F in repair PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. | | 5 | Each |
|---|
| 59 | 59 | Demolition and breaking up drain pipes 150mm SWG pipe, set in cement mortar. | | 30 | RM |
|---|
| 60 | 60 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors. | | 15 | RM |
|---|
| 61 | 61 | S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors. | | 15 | RM |
|---|
| 62 | 62 | S&F PVC (SWR) bend 110 mm dia. | | 10 | Each |
|---|
| 63 | 63 | S&F PVC (SWR) bend 75 mm dia. | | 10 | Each |
|---|
| 64 | 64 | S&F in repair Brass chromium plated tubular towel rail ,20mm dia, D type, 60cm long between flanges. | | 10 | Each |
|---|
| 65 | 65 | S & F vitreous china wash basin white flat back of size 550mm x 400mm including 15mm dia PTMT pillar tap, PTMT waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete in repairs all as specified and directed by Engineer-in-Charge | | 5 | Each |
|---|
| 66 | 66 | S&F in repair vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed. | | 5 | Each |
|---|
| 67 | 67 | S&F in repair, pillar taps, CP 15mm dia cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe. | | 20 | Each |
|---|
| 68 | 68 | S&F in repair fancy type chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore. | | 40 | Each |
|---|
| 69 | 69 | S&F in repair bib tap standard of PTMT any colour high pressure screwed for 15mm bore iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms). | | 50 | Each |
|---|
| 70 | 70 | S&F in repair stop valve, fancy type, chromium plated of brass with long shank and cup, concealed type, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed of 15mm bore . | | 20 | Each |
|---|
| 71 | 71 | S&F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm. | | 3 | Each |
|---|
| 72 | 72 | S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) | | 20 | Each |
|---|
| 73 | 73 | Dismantling of water tanks exc 500 ltr but not exc 1000 ltrs capacity and removing to store. | | 10 | Each |
|---|
| 74 | 74 | S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified . | | 5 | Each |
|---|
| 75 | 75 | S & F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified . | | 5 | Each |
|---|
| 76 | 76 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed with following dia of 20mm. | | 20 | Each |
|---|
| 77 | 77 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed with following dia of 25mm. | | 5 | Each |
|---|
| 78 | 78 | M&L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks n.exc. 500 Ltrs. | | 25 | Each |
|---|
| 79 | 79 | M&L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks exc. 500 Ltrs but n. exc. 1000 Ltrs. | | 25 | Each |
|---|
| 80 | 80 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. | | 15 | Each |
|---|
| 81 | 81 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 Sqm. | | 12 | Each |
|---|
| 82 | 82 | S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | | 0.32 | Cum |
|---|
| 83 | 83 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick complete all as specified. | | 24 | Sqm |
|---|
| 84 | 84 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc. | | 13.2 | Sqm |
|---|
| 85 | 85 | Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed.\n | | 45 | Each |
|---|
| 86 | 86 | Supply and fix MS butt hinges medium weight, cold rolled 75 mm size complete all as specified and directed.\n | | 48 | Each |
|---|
| 87 | 87 | Supply & fix Aluminium anodised barrel tower bolt 150 mm long of extruded section etc complete all as specified and directed.\n | | 30 | Each |
|---|
| 88 | 88 | Supply & fix Aluminium anodised barrel tower bolt 100 mm long of extruded section etc complete all as specified and directed.\n | | 48 | Each |
|---|
| 89 | 89 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed.\n | | 30 | Each |
|---|
| 90 | 90 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed.\n | | 48 | Each |
|---|
| 91 | 91 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed. | | 15 | Each |
|---|
| 92 | 92 | S&F in repair GI wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm dia and fixd with stainless steel wire staples. | | 10 | Sqm |
|---|
| 93 | 93 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips. | | 9 | Sqm |
|---|
| 94 | 94 | S & F sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane. | | 9 | Sqm |
|---|
| 95 | 95 | S&F figured glass 4mm thick,pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane. | | 2 | Sqm |
|---|
| 96 | 96 | Refixing of bib tap/stop cock/pillar taps and sanitary fittings incl necessary requirement in ground etc complete all as specified and directed. | | 50 | Each |
|---|
| 97 | 97 | Refixing of old steel tubing and connections in new or old position with all fittings to floor,wall or ceiling as directed, for 15 mm bore GI tubing. | | 20 | RM |
|---|
| 98 | 98 | Refixing of old steel tubing and connections in new or old position with all fittings to floor,wall or ceiling as directed, for 20 mm bore GI tubing. | | 20 | RM |
|---|
| 99 | 99 | S&F in repair aluminium anodised curtain rails 20 mm dia complete all as specified and directed. | | 45 | RM |
|---|
| 100 | 100 | Cleaning of septic tank chamber by removing effluent water and sludge and buried the same in excavated pits, by digging pits in hard/dense soil including removing surplus earth to a distance not exceeding 50 mtr from starting point and filling up the top portion of pit by excavated soil and sprinkling bleaching powder @ 0.5 Kg/Sqm on excavated areas including forming temporary baricades complete all as specified. | | 550 | Cum |
|---|
| 101 | 101 | Cleaning of manholes n.exc. 1.5m deep including desludging and dewatering either by mechanical pump or manually and taking out solids/semi solids, well flushing with water, removing to a distance exc. 100m but n.exc. 250m and depositing in ditches including necessary excavation and earth work in soft/lose soil for making ditches over after the sludge are deposited spreading and levelling of excavated soil in the ditches over the sludge and removing surplus soil to a distance exc. 50m and sprinkling bleaching powder (including supply of bleaching powder) in a periphery of one metre around manhole complete all as specified. | | 50 | Each |
|---|
| 102 | 102 | Cleaning of 150mm dia SWG/PVC sewage pipe line including manholes after removing the cover (Cast Iron or RCC covers) and placing the same after cleaning the manholes/sewage line complete all as specified. | | 1420 | RM |
|---|
| 103 | 103 | Demolition and breaking up drain pipes 150mm SWG pipe, set in cement mortar. | | 100 | RM |
|---|
| 104 | 104 | Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified. | | 100 | RM |
|---|
| 105 | 105 | M&L for 160mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches excluding earthwork if any or in floors complete all as specified.\n\n | | 100 | RM |
|---|
| 106 | 106 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition). | | 0.2 | Cum |
|---|
| 107 | 107 | Material and labour for providing pre-cast RCC (1:2:4) type 'B-1' as in cover slabs of manholes and similar location (using 20mm graded crushed stone aggregates) including necessary formwork and set in cement mortar (1:4).\nNote : Reinforcement shall be measured and paid separately. | | 0.2 | Cum |
|---|
| 108 | 108 | Supply and fix Mild steel TMT bars 8mm dia and over (confirming to Fe-410-S or Fe-410-0) cut to length, bent to shape required including cranking & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified. | | 25 | Kg |
|---|
| 109 | 109 | Demolition of pre-cast cement concrete block walling built in cement mortar complet all as directed. | | 1 | Cum |
|---|
| 110 | 110 | Material and labour for providing precast cement concrete block of PCC (1:3:6) type-C1 (using 20mm graded aggregates) in masonry with solid blocks, exceeding 10cm in width & set in cement mortar (1:4) including necessary formwork complete all as specified. | | 1 | Cum |
|---|
| 111 | 111 | Material and labour for rendering 10mm thick in cement mortar (1:4) on fair faces of concerete surfaces finished even and smooth without using extra cement. | | 5 | Sqm |
|---|
| 112 | 112 | Taking down plaster on brick, stone/concrete surface etc including racking out joints hacking for key scrubbing down with water, etc built in cement mortar. | | 10 | Sqm |
|---|
| 113 | 113 | Material and labour for 15mm thick rendering in cement mortar (1:4) on conerete surface of wall and using WPC @ 3% by weight of cement. \nNote :(WPC shall be measured and paid seperately) | | 10 | Sqm |
|---|
| 114 | 114 | Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping/benching or similar etc complete including necessary formwork complete all as specified and directed. | | 0.1 | Cum |
|---|
| 115 | 115 | Supply only Integral water proofing compound ISI marked | | 3 | Kg |
|---|
| 116 | 116 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thick (below or above GL) including removing rubbish off the premises complete all as specified. | | 25 | Cum |
|---|
| 117 | 117 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in drain wall etc including necessary formwork complete all as specified. | | 20 | Cum |
|---|
| 118 | 118 | M&L for PCC (1:2:4) type B1, (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified. | | 5 | Cum |
|---|
| 119 | 119 | M&L for 10mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces for fixing of tiles on wall, skirting/dado finished rough complete all as specified and directed. | | 20 | Sqm |
|---|
| 120 | 120 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. | | 30 | Sqm |
|---|
| 121 | 121 | Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc. | | 80 | RM |
|---|
| 122 | 122 | Use and waste of flat formwork to vertical faces of drain and similar work. | | 60 | Sqm |
|---|
| 123 | 123 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. | | 3 | Qtl |
|---|
| 124 | 124 | Dismantling fencing wire mesh any type complete all as directed. | | 100 | Sqm |
|---|
| 125 | 125 | Dismantling posts or struts (wood ,steel or RCC) any section including taking out embedded portion from concrete,masonry etc. and making good disturbed ground complete all as specified. | | 20 | Each |
|---|
| 126 | 126 | Material and labour for Plain cement concrete type C2 , 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation filling of post or struts complete all as specified. | | 1 | Cum |
|---|
| 127 | 127 | Supply and fix mild steel angle post and struts in fencing including cutting tops to shape as swan neck drilling holes notching for wire etc and flate iron fillets for securing wire mesh etc including all necessary drilling,bolting or riveting etc and similar work conforming to gde Fe 410 or Fe 310 complete all as specified. | | 300 | Kg |
|---|
| 128 | 128 | Supply and fix mild steel screw bolts (machine made )with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square diameter of neck 11 to 15 mm length of bolt exc 10cm and nexc 15cm long complete all as specified. | | 40 | Kg |
|---|
| 129 | 129 | Supply and fix in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanished mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified. | | 3 | Per 100 RM |
|---|
| 130 | 130 | Supply only chain link MS galvanished fencing of mesh size 100 x100 mm , made from 4mm diameter wire complete all as specified. | | 300 | Kg |
|---|
| 131 | 131 | Fixing only chain link fencing including line wires any mesh size and type to any type of standared rails,straining bolts etc including provision of binding wire complete all as specified. | | 100 | Sqm |
|---|
| 132 | 132 | Supply and fix Mild Steel Round bars 10mm dia and over (confirming to Fe-410-S or Fe-410-0) cut to length, bent to shape as required including cranking as in TIE bars of fencing etc.complete all as specified. | | 200 | Kg |
|---|
| 133 | 133 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described n.exc 10cm width or girth and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified. | | 25 | Per 10 RM |
|---|
| 134 | 134 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thick (below or above GL) including removing rubbish off the premises complete all as specified and directed. | | 15 | Cum |
|---|
| 135 | 135 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate ) as in foundation bed concrete complete all as specified. | | 15 | Cum |
|---|
| 136 | 136 | Demolition of stone/boulder masonry , built in cement mortar including all quoins,arches,pillars etc ,but excluding ashlar facings dressed stone work and precast concrete articles completed all as specified and directed . | | 30 | Cum |
|---|
| 137 | 137 | Material and labour for walling of random, rubble, uncoursed, well bonded bedded and solidly hearted built in CM(1:6) with PCC (1:3:6) type C1 bond stone and set in CM(1:6), complete, all as specified. \nNOTE: Precast PCC bond stone shall be measured and paid under respective item mentioned here-in-after. | | 25 | Cum |
|---|
| 138 | 138 | Labour only for walling of random, rubble, uncoursed, well bonded bedded and solidly hearted built in CM(1:6) with PCC (1:3:6) type C1 bond stone and set in CM(1:6), complete all as specified.\nNOTE: Precast PCC bond stone shall be measured and paid under respective item mentioned here-in-after. | | 5 | Cum |
|---|
| 139 | 139 | Extra over stone for hammer dressing with maximum depression on face of stone wall and dressing of face bed and joints , as specified , RR walling and uncoarsed or brought up to course. | | 44 | Sqm |
|---|
| 140 | 140 | M&L for hand packing with broken stone/ boulderbehind backing of retaining wall,in layers etc complete. | | 3 | Cum |
|---|
| 141 | 141 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping including necessary formwork complete all as specified. | | 1 | Cum |
|---|
| 142 | 142 | M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bond stone etc complete all as specified. | | 1 | Cum |
|---|
| 143 | 143 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. | | 30 | Rm |
|---|
| 144 | 144 | M&L for raised pointing to random rubble masonry , uncoursed or brought upto courses in CM 1:4. | | 4 | 10 Sqm |
|---|
| 145 | 145 | M&L for PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in path, foundation filling and mass concrete all as specified and directed . | | 4 | Cum |
|---|