Irrigation and Waterways Department has published Replacement Of 6 No Vertical Gates Of Size W1 . 68Mtr 1 Mtr And 3 Nos Verticale Gatee Size H3m W 2M Each Alongwith All Embeded Parts And Few Components Of Hoisting Systems , Trestle Bridge At Ch 1096 Of Gbc And Escape Gate . . . .. Submission Date for this Tender is 05-02-2021. Bridge Work Tenders in Garhbeta West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: :Replacement of 6 (Six) no vertical gates of size (W=1.68mtr x 1 mtr) and 3 nos verticale gatee size ( h=3Mx W= 2M) each alongwith all embeded parts and few components of hoisting systems ,trestle bridge at Ch 1096 of GBC and escape gate of LBFC at bantila respectively under KRP Project in Block Garbeta, and bkhatra Dist- Paschim Medinipur and Bankura | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Testing charges of structural steel material according to IS 2062 - 1999 & Testing charges of rubber according to IS : 18555 - 1986 Before fitting fixing of all material to be placed before E.I.C for inspection.All test certificate should be submitted by the firm berore fitting fixing test will be made by Govt approved Lab. | 1 | 3 | Job |
| 2 | 2 | Replacing skinplate,channels,angles etc.onlyofdraw/flap shutter including cutting the old skin plate, channels,angles etc. as necessary in required shape and replacing the old one by new plate, channels, angles etc. including runing welding and tag welding where necessary including removing rust from existing frame by chipping,emery clothing the surface and painting with two coats of red lead primer as per direction of the Engineer-in-charge complete. | 11 | 5935.59 | Kg |
| 3 | 3 | Cost for supply fitting and fixing of new bottom seal path for cross regulator at main canal gate of required section of half cut ISMB 250, bottom stiffener of required section of 300x100 mm 10 mm tk plate including cutting assembling,welding erection with the help of required machinery including deployment of required infrastructure to facilitate installation ,overhead cost, handling charges complete as per approved drawing and direction of E.I.C Steel materials are required to be of approved brand. | 12 | 422 | Kg |
| 4 | 4 | Cost for supply and delivery of lifting wheel of Dia=570mm,made from 25mm rod,3nos spoke of each length 200mm. With M.S.hub and G.M. internal 2 TPI square thread bush of OD=63.5MM,ID=36mm x L=75mm,with lock pin fixing into the wheel body centre and wheel base fitted with thrust bearing completed by M.S.wheel , G.M nut &thrust plate as per sample or drawing. up to the satisfaction of E.I.C. As per sample. | 13 | 9 | Nos |
| 5 | 5 | Cost for supplying screw rod of bright steel (EN-8) round of 50 mm dia and of required length threaded by 2 TPI and providing with a drilling hole of required dia on the other and after flattened and supplying with one no bolt and nut of required size and all other components as required including painting by one coat of red oxide primer as per sample or drawing up to the satisfaction of E.I.C. length 2.24mtr per screw rod Appropriate fitted with abive lifting wheel L=2.24mtr/Each . | 14 | 20.16 | Mtr |
| 6 | 6 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. above 150 mm. Thick | 15 | 2.7 | CUM |
| 7 | 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. With local hard blackstone variety chips (crusher broken) | 16 | 2.7 | CUM |
| 8 | 8 | Cost of transportation for shifting the scrap materials to the khatra workshop including loading and unloading at both end etc to complete the job at site as per direction of E.I.C | 17 | 190 | KM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
