Different Roads Under Buniadpur Highway Sub-Division Jurisdiction , Installation Of Road Furniture And Retro-Reflectorised Traffic Sinage Under Dakshin Dinajpur Highway Division , In The District Of Dakshin Dinajpur , During The Year 2020-21 .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Feb 2021
0 days left
EMD
31893
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Buniadpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Different Roads Under Buniadpur Highway Sub-Division Jurisdiction , Installation Of Road Furniture And Retro-Reflectorised Traffic Sinage Under Dakshin Dinajpur Highway Division , In The District Of Dakshin Dinajpur , During The Year 2020-21 .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jan-2021 | 1st Corrigendum | Date | 22-Feb-2021 |
BOQ
| Name of Work:- Different Roads under Buniadpur Highway Sub-Division Jurisdiction, Installation of road Furniture and Retro-reflectorised Traffic Sinage under Dakshin Dinajpur Highway Division, in the District of Dakshin Dinajpur, during the year 2020-21. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Retro-Reflectorised Traffic Signs\nProviding and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).\n90 cm equilateral triangle | Item1 | 65 | each |
| 2 | 1.01 | 60 cm circular | Item1 | 69 | each |
| 3 | 1.02 | 80 mm x 60 mm rectangular | Item1 | 34 | each |
| 4 | 1.03 | 60 cm x 45 cm rectangular\n | Item1 | 32 | each |
| 5 | 1.04 | 90 cm high octagon | Item1 | 18 | each |
| 6 | 2 | Direction and Place Identification Signs with size\nmore than 0.9 sqm size Board.\nProviding and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). | Item1 | 30.24 | sqm |
| 7 | 3 | Direction and Place Identification Signs upto 0.9 sqm\nSize Board.\nProviding and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved\ndrawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).. | Item1 | 15.12 | sqm |
| 8 | 4 | Supplying & fixing of Raised Pavement Markers / Road Studs / Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to clause no 804 of MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sq.cm. on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based\nadhesive as per manufacturer's recommendation including site clearance etc. and complete as directed by the Engineer in Charge .The contractor will have to provide a test certificate from a reputable national/international laboratory conforming the above specifications. | Item1 | 300 | each |
| 9 | 5 | Add GST @ 12% | Item2 | 1.40971e+06 | % |
| 10 | 6 | Add Labour Welfare Cess @ 1% | Item3 | 1.57887e+06 | % |
AI Tender Summary
Tender Timeline
Jan 29, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 22, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender