Military Engineer Services-MES has published Provision Of Chain Link Fencing Around Bldg No A 76 ( Csd ) And A 77 ( Single Jco Living Accn ) Including 02 X Iron Gate At Signal Unit And Certain Revenue And Minor Work At Happy Valley Under Ge Shillong .. Submission Date for this Tender is 01-02-2021. Wire Fencing Tenders in GE SHILLONG. Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-02-2021 |
| Name of Work: PROVN OF CHAIN LINK FENCING AROUND BLDG NO A-76(CSD) AND A-77(SINGLE JCO LIVING ACCN) INCLUDING 02X IRON GATE AT SIGNAL UNIT AND CERTAIN REVENUE AND MINOR WORK AT HAPPY VALLEY UNDER GE SHILLONG. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Surface dressing n.exc 30 cm deep and averaging 15 cm deep in soft / loose soil etc complete all as specified and as directed by Engineer-in-Charge.\n | 345.92 | SQM | |
| 2 | 2 | Excavation in trenches in soft / loose soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out etc complete all as specified and directed by Engineer in Charge. | 105.94 | CUM | |
| 3 | 3 | Excavation in trenches in hard / dense soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out etc complete all as specified and directed by Engineer in Charge. | 4 | CUM | |
| 4 | 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in soft/loose soil etc complete all as specified and as directed by Engineer in Charge. | 16.68 | CUM | |
| 5 | 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in hard/dense soil etc complete all as specified and as directed by Engineer in Charge. | 4.08 | CUM | |
| 6 | 6 | Removing excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge. | 80.02 | CUM | |
| 7 | 7 | M&L for Hardcore of crushed stone, gauge n exc 63mm, deposited, spread and levelled well in layers n exc 15cm thick, watered and rammed to a true surface etc complete all as specified and as directed by Engineer-in-Charge.\n | 13.68 | CUM | |
| 8 | 8 | Excavation in post holes not exceeding 0.5 cum, getting out in soft / loose soil , returning, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exceeding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 m and making good to disturbed surface etc complete all as specified and as directed by Engineer in Charge. | 109 | EACH JOB | |
| 9 | 9 | M&L for PCC (1:3:6) type B1 using 20 mm graded stone aggregate as in fixing of RCC/PCC/Steel post or similar type of works etc complete all as specified and as directed by Engineer-in-Charge.\n | 4.36 | CUM | |
| 10 | 10 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor , foundation filling and mass concrete etc complete all as specified and directed by Engineer in Charge. | 43.92 | CUM | |
| 11 | 11 | M&L for PCC ( 1:2:4 ) type B-2 ( using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concrete etc complete all as specified and as directed by Engineer-in-Charge.\n | 0.24 | CUM | |
| 12 | 12 | M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.\n | 64.36 | CUM | |
| 13 | 13 | M&L for Plain cement concrete ( 1:2:4 ) type B-0 ( using 12.5 mm graded crushed stone aggregate) as in coping works including necessary formwork etc complete all as specified and as directed by Engineer-in-Charge.\n | 2.08 | CUM | |
| 14 | 14 | M&L for Rendering 10mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.\n | 257.76 | SQM | |
| 15 | 15 | M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc complete all as specified and as directed by Engineer-in-Charge.\nNote WPC shall be measured and paid separately. | 104.3 | SQM | |
| 16 | 16 | Supply only water proofing compound complete all as specified and as directed by Engineer-in-Charge.\n | 12 | Kg | |
| 17 | 17 | M & L for rendering 5mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed . | 2.89 | SQM | |
| 18 | 18 | S&F Anodised aluminium window and ventilator shutters, powder coating of any colour (Thickness of powder coating not less than 50 micron). side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100 mm long (2 no.) suitable handle (1no.) complete all as specified complete all as specified and as directed by Engineer-in-Charge.\n | 0.5 | SQM | |
| 19 | 19 | S&F Anodised aluminium frame Powder Coating (minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc etc complete all as specified and as directed by Engineer-in-Charge.\n | 0.3 | KG | |
| 20 | 20 | S&F PVC door frame, solid, of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed by Engineer-in-Charge.\n | 14.05 | RM | |
| 21 | 21 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.\n | 3.82 | SQM | |
| 22 | 22 | S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and as directed by Engineer-in-Charge.\n | 9 | EACH | |
| 23 | 23 | S&F handles , Aluminium anodized, cast type 150 mm size, complete all as specified and directed by Engineer-in-Charge.\n | 4 | EACH | |
| 24 | 24 | S & F 150mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. complete all as specified and directed by Engineer-in-Charge.\n | 2 | EACH | |
| 25 | 25 | S&F Aluminium anodised, barrel tower bolts of extruded section 150 mm length complete all as specified and as directed. | 6 | EACH | |
| 26 | 26 | S & F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded\nsections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all ass specified and as directed by Engr-In-Charge. | 1 | EACH | |
| 27 | 27 | S&F 3mm thick frosted sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane ground or obscured or frosted, on one side complete all as specified and directed by Engineer-in-Charge.\n | 0.5 | SQM | |
| 28 | 28 | M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , joint free , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 ,set and jointed in neat cement slurry and pointed in white / coloured cement to match complete all as specified and directed by Engineer-in-Charge.\n | 45.32 | SQM | |
| 29 | 29 | M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , joint free , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 ,set and jointed in neat cement slurry and pointed in white / coloured cement to match and roughening surfaces of old concrete by picking,sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engineer-in-Charge.\n | 15.96 | SQM | |
| 30 | 30 | M&L for Glazed ceramic colour tiles of size 300x200x7/450 x 300 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed by Engineer-in-Charge.\n | 106.5 | SQM | |
| 31 | 31 | M&L for Glazed ceramic colour tiles of size 450 x 300 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including removing old lime wash(if any) hacking for key,raking out joints of old brick work or stone work built in cement or lime mortar:not previously plastered: and scrubbing down with watre etc to receive plaster complete all as specified and directed by Engineer-in-Charge.\n | 70 | SQM | |
| 32 | 32 | M&L for 100 mm thick PCC type D-2 , (1:4:8, using 40 mm graded stone aggregates) as in sub base of floor , finishing the cement concrete surfaces even etc complete all as specified and directed by Engineer-in-Charge.\n | 43.32 | SQM | |
| 33 | 33 | M&L for machine pressed pre polished factory made rubber moulded pavement chequered cement concrete tiles of size 300 X 300 X 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed in cement sand mortar (1:4) complete all as specified and directed by Engineer-in-Charge.\n | 64.32 | Sqm | |
| 34 | 34 | S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. | 12.5 | RM | |
| 35 | 35 | S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. | 3.5 | RM | |
| 36 | 36 | S&F 75 mm bore PVC (SWR) bend of any radius complete all as specified and directed by Engineer-in-Charge.\n | 2 | EACH | |
| 37 | 37 | S&F 110 mm bore PVC (SWR) bend with access door of any radius complete all as specified and directed by Engineer-in-Charge.\n | 1 | EACH | |
| 38 | 38 | S&F 75 mm bore PVC (SWR) bend with access door of any radius complete all as specified and directed by Engineer-in-Charge.\n | 2 | EACH | |
| 39 | 39 | S&F PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and directed by Engineer-in-Charge. | 1 | EACH | |
| 40 | 40 | S&F PVC (SWR) vent cowl 110mm dia complete all specified and directed. | 1 | EACH | |
| 41 | 41 | S&F Vitreous China Urinal ( Top inlet ) with fixing accessories set of size 345 x 320 x 610 mm etc complete all as specified and directed by Engineer-in-Charge.\nMake:- Jaquar Cat part No URS-WHT-13257 or equivalent make in / Cera / Hindware / Parryware. | 4 | EACH | |
| 42 | 42 | S & F 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed by Engineer-in-Charge.\n | 5 | EACH | |
| 43 | 43 | S&F 15mm bore stop cock PTMT , screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-Charge.\n Make:- Prayag / Hindware. | 4 | EACH | |
| 44 | 44 | S&F waste coupling of PTMT suitable for urinal (min weight 32-45 gms) complete all as specified and directed by Engineer-in-Charge.\n | 4 | EACH | |
| 45 | 45 | S&F 450mm bore reinforced concrete pipes, class NP2(ISI Marked) embosing with date of manufacturing, laid and jointed with CM (1:3) complete all as specified and directed by Engineer-in-Charge.\n | 15 | RM | |
| 46 | 46 | S&F GI tubing 15 mm dia medium grade with all fittings, concealed in wall, ceiling or floor with necessary GI clamp or hook including necessary water connection etc complete all as specified and directed by Engineer-in-Charge.\n | 16 | RM | |
| 47 | 47 | S&F GI tubing 20 mm dia medium grade with all fittings, concealed in wall, ceiling or floor with necessary GI clamp or hook including necessary water connection etc complete all as specified and directed by Engineer-in-Charge.\n | 60 | RM | |
| 48 | 48 | M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapet and railings up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer in Charge. | 0.14 | CUM | |
| 49 | 49 | M&L for RCC 1:2:4 type B-1 ( nominal mix) ( using 20mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.\n | 0.8 | CUM | |
| 50 | 50 | M&L for RCC 1:2:4 type B-1 ( nominal mix) ( using 20mm graded crushed stone aggregates) as in Slabs supported on walls,\nbeams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.\n | 0.88 | CUM | |
| 51 | 51 | Formwork to sides and soffits in rough finished flat surfaces of floor or roof beams,beam haunchings,girders,bressumers,lintels,cantilevers,shelves including support,overhangs etc also splays between floors and beams complete all as specified and as directed by Engineer in Charge. | 5.21 | SQM | |
| 52 | 52 | Formwork to soffits of suspended slabs such as roof slabs, floor\nslabs, landings and similar work not exceeding 200mm thick\n(Horizontal or sloping) in rough finished flat surfaces of concrete complete all as specified and as directed by Engineer in Charge. | 5.95 | SQM | |
| 53 | 53 | M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed by Engineer in Charge. | 656 | KG | |
| 54 | 54 | M&L for Mild steel TMT deformed bars, 6 to 8 mm dia, cut to length bent to shape required, bending including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed by Engineer in Charge. | 22 | KG | |
| 55 | 55 | M&L for Mild steel TMT deformed bars, 5 mm dia and over and upto 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed by Engineer in Charge. | 226 | KG | |
| 56 | 56 | M&L for PCC( 1:3:6) type C2 (using 40 mm graded stone aggregate) as in surface channel and drains including necessary form work complete all as specified and directed by Engineer-in-Charge.\n | 1.27 | Cum | |
| 57 | 57 | M & L for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 10 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work etc complete all as specified and as directed by Engineer in Charge | 48 | RM | |
| 58 | 58 | M&L for 40 mm thick PCC in cement concrete ( 1:2:4 ) type B-1 (using 20 mm graded coarse aggregate) as in floor/path finished even and smooth without using extra cement and spike rolling to surface or making impression of expanded metal whilst the concrete is green complete all as specified and directed by Engineer-in-Charge.\n | 109.2 | SQM | |
| 59 | 59 | M&L for 75 mm thick PCC in cement concrete ( 1:2:4 ) type B2 , ( using 40 mm graded coarse aggregate) as in floor finished even and smooth without using extra cement including necessary formwork etc complete all as specified and directed by Engineer-in-Charge.\n | 10.52 | SQM | |
| 60 | 60 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed by Engineer-in-Charge.\n | 145.2 | RM | |
| 61 | 61 | S&F mild steel works such as Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.\n | 600 | KG | |
| 62 | 62 | S&F 1.60 mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingmor turning up, mitred angles, etc.complete all as specified and directed by Engineer-in-Charge.\n | 8.4 | Sqm | |
| 63 | 63 | S&F Mild Steel work in tubular trusses including special shaped, washers etc including cutting welding, bending in shape etc using ERW or induction butt welded tubes confirming to IS.1161-1979 grade St-240 complete all as specified and directed by Engineer-in-Charge.\n | 655.52 | KG | |
| 64 | 64 | S&F 5 mm thick Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc conforming to Fe 410-W (Gde-E- 250) quality-A etc complete all as specified and directed by Engineer-in-Charge.\n | 16.96 | KG | |
| 65 | 65 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.\n | 48.51 | SQM | |
| 66 | 66 | S&F 0.63 mm thick Galvanised Corrugated Iron (CGI) sheeting with two corrugation side lap sheets having Zinc coating @120 gram per sqm inclusive both sides, fixed with 'J' type hook or 'L' type hook and washers as in roof covering etc complete all as specified and directed by Engineer-in-Charge.\n | 36.16 | Sqm | |
| 67 | 67 | S&F 0.63 mm thick Plain Galvanised Iron (PGI) sheetss having Zinc coating @120 gram per sqm inclusive of both sides as in ridge, hips valley gutter, drip and straight flashing etc, fixed in any pattern complete all as specified and directed by Engineer-in-Charge.\n | 11.52 | Sqm | |
| 68 | 68 | M&L for Synthetic enamel paint two coats over a coat of red oxide primer on new or previously untreated steel surfaces exc.10 Cm width or girth including necessary preparation of steel surfaces etc complete all as specified and directed by Engineer-in-Charge.\n | 194.6 | SQM | |
| 69 | 69 | M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint over a coat of wall primer complete all as specified and directed by Engineer-in-Charge.\n | 178.5 | SQM | |
| 70 | 70 | M&L for RCC 1;2:4 type-B1(nominal mix) ( using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed by Engineer in Charge. | 2.7 | CUM | |
| 71 | 71 | M&L for RCC 1;2:4 type-B1(nominal mix) ( using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engineer in Charge. | 3.52 | CUM | |
| 72 | 72 | Formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engineer in Charge. | 8.5 | SQM | |
| 73 | 73 | Formwork in rough finished surfaces of of rectangular, square or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer in Charge. | 34.96 | SQM | |
| 74 | 74 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of new GI binding wire etc complete all as specified and as directed. | 540 | SQM | |
| 75 | 75 | Supply only Chain link MS galvanised fencing, any size or type etc complete all as specified and as directed.Note:- The unit weight of chain link shall not be less than 4 kg per sqm. | 2268 | KG | |
| 76 | 76 | S&F mild steel works such as Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed. | 2447.31 | KG | |
| 77 | 77 | S&F mild steel flat iron / angle iron fixed to posts to hold chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed. | 492.37 | KG | |
| 78 | 78 | S&F Mild steel 16 to 20 mm dia screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but n.exc. 22.5 cm long etc complete all as specified and as directed. | 75 | KG | |
| 79 | 79 | S&FGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. | 16 | 100 RM | |
| 80 | 80 | M&L for mild steel round bar upto & including 10 mm dia cut to length bent to shape required including bending, hookings as in chain link fencing fixed with bent to shape required including bending, hookings as in chain link fencing fixed with nut &bolt or securing with clips quality conforming to Fe-410-S etc complete all as specified and as directed. | 592.32 | KG | |
| 81 | 81 | M&L for Concertina coil, made out of hard drawn, steel wire fabric with 14mm blade clips, 05 Nos in each spiral, tape thickness 0.50mm , GI stripping core wire 2.60mm thick and spiral turns per roll is 52 Nos including securing with 'Y' shaped angle iron with available size complete all as specified and directed.`\nNote: One role concertina coil should extend upto 10Rm. | 24 | X RM | |
| 82 | 82 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core,\netc.. to store and rubbish not exc. 50m built in cement or cement lime mortar complete all as specified and as directed by Engr-In-Charge. | 0.315 | Cum | |
| 83 | 83 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-In-Charge. | 0.58 | Cum | |
| 84 | 84 | M&L for 75mm thick PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregates) as in plinth protection including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-In-Charge. | 5.11 | Sqm | |
| 85 | 85 | M&L for applying two coats of oil bound distemper on new ceiling surface including preparation of surfaces over and including 01mm thick Birla putty complete all as specified and as directed. | 2.89 | SQM | |
| 86 | 86 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:-\n (i) Screed bed or bedding layer of mortar 1:4 in 15 mm thick for laying as in roof slab with mixing of WPC and surface finished fare and even without using extra cement. (Note: WPC shall be measured and paid for under separate items)\n(ii) Preparation of plastered roof surface and applying one coat of cold bituminous primer @ 0.25 ltr /Sqm conforming to IS:3384-1986.\n(iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied by torch application over bituminous primer as specified. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.\n(iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. \nNote:-The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer. Contractor shall submit documentary evidence on support of applicator engaged for approval of GE. | 7.05 | SQm | |
| 87 | 87 | Supply and Fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-In-Charge. | 0.3 | SQM | |
| 88 | 88 | M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete allas specified and as directed by Engr-In-Charge. | 1 | Each | |
| 89 | 89 | S&F 15 mm size bib tap long body, fancy type chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-In-Charge. | 1 | Each | |
| 90 | 90 | S&F 15 mm size Angular stop cock complete all as specified and directed. Make : Jaquar CatPart No : CON -059KN or equivalent series in KOHLER/Roca/Hindware. complete all as specified and as directed by Engr-In-Charge. | 5 | Each | |
| 91 | 91 | S&F 15 mm bore CP centre hole basin mixer with pop up waste system with 450 mm long braided hoses etc complete all as sspecified and as directed. Make:- Jaquar Continental series Cat part No CON-169-KNB or equivalent make in / Cera / Hindware / Parryware. | 1 | Each | |
| 92 | 92 | S&F Vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Cera / Hindware. | 1 | Each | |
| 93 | 93 | S & F Vitreous china wash hand under counter oval shaped basin with fixing acessories set, white coloured of size 595 mm x 420mmx200mm mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia complete all as specified and as directed by Engineer-in-Charge.' Make : Jaquar Cap Pat No : CNS-WHT-705 or equivalent series in KOHLER/Roca/Hindware. | 1 | Each | |
| 94 | 94 | M & for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 0.6 | Sqm | |
| 95 | 95 | M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation. | 8.08 | RM | |
| 96 | 96 | S&F 40 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kgf / cm2 fixed complete to wallsc.ceilings or in floors etc complete all as specified and directed. | 1 | RM | |
| 97 | 97 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and as directed. | 5 | RM | |
| 98 | 98 | S&F PVC (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and directed. | 2 | Each | |
| 99 | 99 | S F Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in wall complete all as specified and as directed. | 1 | Each | |
| 100 | 100 | S&F Bevelled edge mirror, of size 600mm x 450mm x5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed . | 1 | Each | |
| 101 | 101 | S&F Toilet roll holder Vitreous China Coloured box type fixed to wall with Chromium plated brass screws etc complete all as speicifed and as drected. Make:-Prayag / Cera / Hindware / Parryware. | 1 | Each | |
| 102 | 102 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. | 1 | Each | |
| 103 | 103 | S&F PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag / Pearl/ Hindware. | 1 | EACH | |
| 104 | 104 | S&F Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed. | 1 | Each | |
| 105 | 105 | M&L 15 to 18mm thick Green marble machine cut bedded, jointed with neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match in risers/Treads of steps over 15mm thick screed bed in CM 1:6 including cutting and polishing all as specified and directed. | 5 | Sqm | |
| 106 | 106 | S&F stainless steel sink with draining board made out of 1.00 mm thick sheet with waste fitting,cast iron cantilever brackets,cvonnecting union overall szie 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed by Engr-In-charge. | 4 | Each | |
| 107 | 107 | M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed by Engr-In-Charge.\n | 54 | Sqm | |
| 108 | 108 | Material and labour for Concealed Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories,cassing capping concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / bell point controlled by one switch etc complete all as specified and as directed. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III .Note (All chases will be cut by chase cutter machine only)\n\n | 4 | Per Point | |
| 109 | 109 | All as per Item No. 107.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.\n\n | 1 | Per Point | |
| 110 | 110 | Supply and fix Switch piano flush type 5 Amps single pole one way complete one light/fan point comntrolled by one switch all as specified and directed. \n\n | 4 | Each | |
| 111 | 111 | Supply and fix Switch socket combinationISI marked) 2/3 pin and 15 Amps,flush type,240 volts complete all as specified as and directed. \n\n | 1 | Each | |
| 112 | 112 | S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. | 4 | EACH | |
| 113 | 113 | S&F Decorative wall mounted LED batten fittings with all accessories, 1X18 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make Havells Cat part No. LHEXBQP71N1W018 / CROMPTON Cat Part No. LCTL 18 CDL. / Philips cat part no. DX UJJWAL. | 2 | EACH | |
| 114 | 114 | S&F Decorative wall mounted LED batten fittings with all accessories, 1X10 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make Havells Cat part No. LHEXACP7INW010 / CROMPTON Cat Part No. LCTL 10 CDL. or equivalent in Philips. | 1 | EACH | |
| 115 | 115 | S & F Exhaust fan 230 volts , 250mm sweep ,Plastic body including making all electric connection including cutting of hole on brick or block wall and making good disturbed to disturbed surface of wall with cement sand plaster (1:4) and painted / colour wash to match the existing to the true satisfaction of Engineer in charge, necessary and outer wooden box for fan fix on wall etc complete all as specified and as directed. Make :- Havells cat part no. ventil air DX White or equivalent make of Bajaj / Philips. | 1 | EACH | |
| 116 | 116 | Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old unserviceable one complete all as specified and directed, .(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga. | 15 | RM | |
| 117 | 117 | Supply and fix MCB Distribution board , 240 volts single pole and neutral ,single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. | 1 | EACH | |
| 118 | 118 | Supply and fix MCB, single pole and neutral ,32 Amps , 240 volts 'C' series , 10 kA rupturing capacity , 50 Hz etc complete all as specified and as directed.Make : Havells Cat Part No DHMGCSNF006-32/L&T Cat Part No.BB20320C / Schneider / Indoasian / Legrand | 1 | EACH | |
| 119 | 119 | Supply and fix MCB, single pole ,6-32 Amps , 240 volts 'C' series , 10 kA rupturing capacity , 50 Hz etc complete all as specified and as directed.Make : Havells Cat Part No DHMGCSPF006-32L&T / Schneider / Indoasian / Legrand | 1 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
