}

Infrastructure And Amenities Fund_2020_21_Community Toilet With Water Supply Arrangements At Theni-Kumuli Main Road In Veerapandi Town Panchayat, Veerapandi Town Limit, Theni District-Tamil Nadu

Town Panchayats-TP has published Infrastructure And Amenities Fund_2020_21_Community Toilet With Water Supply Arrangements At Theni-Kumuli Main Road In Veerapandi Town Panchayat. Submission Date for this Tender is 29-01-2021. Toilet Bathroom Tenders in Veerapandi Town Limit, Theni District Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

26643702
Infrastructure And Amenities Fund_2020_21_Community Toilet With Water Supply Arrangements At Theni-Kumuli Main Road In Veerapandi Town Panchayat
Open Tender
Indian
Tamil Nadu
Veerapandi Town Limit, Theni District
29-01-2021

Tender Details

Infrastructure And Amenities Fund_2020_21_Community Toilet With Water Supply Arrangements At Theni-Kumuli Main Road In Veerapandi Town Panchayat

Key Value

Document Fees
Refer document
EMD
INR 11000.0 /-
Tender Value
INR 11 Lakhs /-

BOQ Items

Name of Work: Construction of Community Toilet with watersupply Arrangements at Theni-Kumuli Main road in Veerapandi Town Panchayat
Sl. No. Item Description Item Code / Make Quantity Units
1 1.01 Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B). 80 M3
2 2.01 Supplying and Filing in foundation and basement with Filling Sand in layers of not more than 15cm thick well rammed,watered consolidated including cost and conveyance of materials and labour charges etc., complete as per Standard Specification and as directed by departmental Engineers(TNBP No.24&25) 2.5 M3
3 3.01 Supplying and filling in foudation and basement with Good gritty Gravel in layers of not more than 15cm thick including well rammed watered and consolidated including cost and conveyance of sand to work site from approved sources and including labour charges for all lead, Gravel lift, filling, laying, levelling, watering and compacting including all other incidental charges etc., complete complying with standard specifications(TNBP No.24&25). 10 M3
4 4.01 Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28). 10 M3
5 5.01 Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30
6 5.02 For Grade Beam 49 M2
7 5.03 For Lintel,Beam&Slab 71 M2
8 5.04 For Coloumn,Sunshade 51 M2
9 6.01 Cement concrete 1:1 1/2:3 (One cement, one and half sand and Three aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30) 22 M3
10 7.01 Providing RCC Precast Jally of 50mm Tk in Cement concrete 1:1 1/2:3 (One cement, one and half sand and Three aggregate) using 20mm ISS HBG Metal including cost of Metal,Reinforcement and conveyance charges and Vibrator including all labour charges and all other incidential charges etc., complete as per standard specification and as directed by the departmental officers.TNBP No.30 3 M2
11 8.01 Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30 2200 Kgs
12 9.01 Brick Work in CM 1:5 (One part of cement & five parts of sand) mix using Third Class Country Brick Kiln Burnt bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31
13 9.02 a)Foundation and Basement 18 M3
14 9.03 b)For Ground Floor 16 M3
15 10.01 Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57 31 M2
16 11.01 Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57 279 M2
17 12.01 Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc.complete complying with standard specification as directed by the departmental officers. - 10 m2 TNBP No:44-I 31 M2
18 13.01 Supplying, fabricating and fixing in position of mild steel door with Double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, fully covered with M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffners and one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete. (TWAD SOR 2018-2019 Item No:20,Sl.No:(IV)) 2.6 M2
19 14.01 Supplying, fabricating and fixing in position ofPVC Panelled door shutters hollow type-200mm X 20mm Panels with1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using M.S.Angle/Flat including cost of Aluminium hinges and other furniture fittings etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the Door shutter should be got approved by Dept.Officers before use on works) 14 M2
20 15.01 Laying with first quality design ceramic tiles of all colours new ceramic tiles 305 x 305x 6mm tk for flooring and set in Cement Mortar 1:3 (one part of cement & three parts of sand)20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special 30 M2
21 16.01 Daddoing with first quality colour glazed tiles of 150 mm x 150 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2 (One Cement and Two Sand) and pointing with white cement neatly including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special 52 M2
22 17.01 Supply and fixing of Indian water closet with new glazed earthern ware Indian water closet of 22” Oriya type of approved quality & approved colour with “P” or “S” trap with sand cushion and forming flooring around the water closet using 40mm size broken brick jelly in cement concrete 1:2:4 of 4” thick and plastering with cement motar 1:3 20mm thick using river sand including fixing the water closet in position and giving necessary connection to CI stacks etc. complete including cost and conveyance of all materials and all labour charges etc.complete complying with standard specification and as directed by the departmental officer etc. complete. TNBP No. 100,102 & 103 8 Nos
23 18.01 Supply and position colour Glazed European water closet best quality and approved make with 100 mm P or S trap with Double flapped rigit PVC sheet cover with C.P brass hinches with 10 litres capacity PVC low level flushing tank with all internal fittings etc complete.including cost and conveyance of all materials and all labour charges etc.complete complying with standard specification and as directed by the departmental officer etc. complete. TNBP No.100,102 & 103 2 Nos
24 19.01 Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A 182 M2
25 20.01 Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A 6 M2
26 21.01 Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)(SD-26) 18 pts
27 22.01 Supply and fixing of Crystal Glass LED Tube Light of 4' X 18W.(PWD SOR 18-19 Annexure VII-5) 8 Nos
28 23.01 Supply and fixing of 9 Watts PL Lamp(Like OSRAM,PHILIPS Etc) Including all charges as Directed by the Departmental Officers Etc,Complete,(Rate as Per PWD SOR 18-19 Annexure -VII- 3a) 10 Nos
29 24.01 Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(PWD Electrical Standard data 2018-2019 No.SD. 64). 15 Rm
30 25.01 Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm did (B Class) G.I.Pipe suitably bend at both ends with necessary angle iron upright and end support for main.(PWD Electrical Standard data 2018-2019 No.SD. 69). 2 Rm
31 26.01 Supply and delivery and fixing of 1000 Liter Capacity PVC Water tank including loading,unloading, transportation and labourcharges for fixing charges etc.,(Rate as Per TWAD SOR 18-19) 2 Nos
32 27.01 Supplying and fixing in position best quality PVC soil / waste pipes of 110mmdia having 6 kg / sq.cm. pressure BIS mark etc., complete complying with standard specifications. (PWD SOR 2018-19 Item 213-j) 15 Rm
33 28.01 Supplying and fixing in position best quality PVC pipes of 25mmdia having 10 kg / sq.cm. pressure BIS mark etc., complete complying with standard specifications. (PWD SOR 2018-19 Item 213-c) 20 Rm
34 29.01 Supplying and fixing in position best quality PVC pipes of 20mmdia having 10 kg / sq.cm. pressure BIS mark etc., complete complying with standard specifications. (PWD SOR 2018-19 Item 213-b) 22 Rm
35 30.01 Supply and delivery of 15 mm Dia heavy type screw down tap Including all charges as Directed by the Departmental Officers Etc,Complete,(Rate as Per PWD SOR 18-19 Annexure -VI- 218) 10 Nos
36 31.01 Supplying and fixing of 16Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.141) 1 No
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail