Repairs To Joinery , Plumbing , Plastering And Roof Treatment To Certain Buildings At Sqae ( A ) , Nai And Ptl Under Ge ( I ) ( P ) Fy Kirkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Feb 2021
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kirkee → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Joinery , Plumbing , Plastering And Roof Treatment To Certain Buildings At Sqae ( A ) , Nai And Ptl Under Ge ( I ) ( P ) Fy Kirkee
BOQ
| Name of Work : REPAIRS TO JOINERY, PLUMBING, PLASTERING AND ROOF TREATMENT TO CERTAIN BUILDINGS AT SQAE(A), NAI AND PTL UNDER GE(I) (P) FY KIRKEE | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down door/window chowkhats or frames with shutters any type (without taking off shutters from the frame) area exceeding 1.5 sq. m but n exc 4 sq. m of each including builders hardware and making good the disturbed surfaces complete all as specified and directed | 6 | Each job | |
| 2 | 2 | Taking down door/window chowkhats or frames with shutters any type (without taking off shutters from the frame) area exceeding 1.5 sq. m but n exc 4 sq. m of each including builders hardware including refixing in the same opening and making good the disturbed surfaces complete all as specified and directed | 2 | Each job | |
| 3 | 3 | Taking down shutters of any description area exceeding 1.0 sq. m but n exc 2 sq. m of each including builders hardware complete all as specified and directed | 8 | Each job | |
| 4 | 4 | Taking down shutters of any description area exceeding 1.0 sq. m but n exc 2 sq. m of each including builders hardware including refixing in the same opening complete all as specified and directed | 6 | Each job | |
| 5 | 5 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed | 9.15 | cum | |
| 6 | 6 | Material and labour for providing precast reinforced cement concrete 1:2:4 type B1(using 20mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces set in cement mortar (1:6) including necessary steel forms complete all as specified and directed\nNOTES: \n(a) Reinforcement shall be measured and paid separately.\n(b) Quoted rates are deemed to include cost of demolition of old cover slabs.\n(c) Credit for steel shall be accounted separately | 0.15 | cum | |
| 7 | 7 | Material and labour for providing TMT steel bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. | 40 | kg | |
| 8 | 8 | Taking up or down steel tubing and connections, 15mm bore of pipe including cleaning and refixing in in new or old position all as specified and directed | 50 | RM | |
| 9 | 9 | Taking up or down steel tubing and connections, 20mm bore of pipe including cleaning and refixing in in new or old position all as specified and directed | 30 | RM | |
| 10 | 10 | Material & Labour for taking down cement plaster on brick/concrete walls including raking out joints, hacking for key, scrubbing down with water, etc including rendering 10mm thick in cement mortar 1:6 finished even & smooth without using extra cement all as specified and directed.\n | 130 | sqm | |
| 11 | 11 | Material & Labour for taking down cement plaster on brick/concrete walls including raking out joints, hacking for key, scrubbing down with water, etc including rendering 15mm thick in cement mortar 1:4 finished even & fair mixed with integral water proofing compound(as per manufacturers instructions) all as specified and directed.\nNOTE Supply only integral water proofing compound shall be measured and paid separaely | 100 | sqm | |
| 12 | 12 | Material & Labour for taking down cement plaster from ceilings including raking out joints, hacking for key, scrubbing down with water, etc including rendering 5mm thick in cement mortar 1:3 finished even & smooth without using extra cement all as specified and directed. | 120 | sqm | |
| 13 | 13 | Supply only integral water proofing compound (ISI marked) all as specified and directed | 120.54 | kg | |
| 14 | 14 | Material and labour for providing 25mm thick Cement concrete 1:3:6 type C0 (using 12.5mm graded stone aggregates) in sub base all as specified and directed | 50 | sqm | |
| 15 | 15 | Material and labour for providing 75mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) in sub base to receive floor finishes all as specified and directed | 70 | sqm | |
| 16 | 16 | Material and labour for providing Cement concrete 1:3:6 type C2 (using 40mm graded stone aggregates) as in filling of sunken potion , foundation filling and mass concrete mixed with integral water proofing compound(as per manufacturers instructions) all as specified and directed\nNOTE Supply only integral water proofing compound shall be measured and paid separaely | 5.4 | cum | |
| 17 | 17 | Material and labour for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in cement mortar 1:6 and including demolition of old tiles including screed bed all as specified and directed | 50 | sqm | |
| 18 | 18 | Material & Labour for providing Glazed ceramic coloured tiles 450 mm x 300 mm x 7 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match fixed over and including 10 mm thick rendering in cement mortar 1:4 including demolition of old tiles including back coat complete all as specified. | 90 | sqm | |
| 19 | 19 | Material & Labour for providing 60 mm thick M-35 grade machine pressed precast concrete interlocking paver blocks confirming to IS 15658-2006 with grey cement and pigment any shape and size laid over and including 30mm thick crushed stone sand cushioning including demolition of old blocks with cushioning all as specified and directed | 70 | sqm | |
| 20 | 20 | Material and labour for providing plain cement concrete type C-2 1:3:6 using (40 mm graded stone aggregates) 75 mm thick as in plinth protection/hardstanding of building broom finished surfaces including necessary construction joint not exc 3.0m centre to centre, filling with mastic complete all as specified and directed. | 50 | sqm | |
| 21 | 21 | Material and labour for providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating and use and watse of steel formwork, all as specified and directed | 0.2 | cum | |
| 22 | 22 | Supply and fix mild steel sections in Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling of old wrought iron or mild steel work all as specified and directed | 230 | kg | |
| 23 | 23 | Supply and fix factory made Pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc all as specified and directed | 9.7 | RM | |
| 24 | 24 | Supply and fix factory made 30mm thick Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including both faces covered with decorative face veneer with lipping/frame to match with provision of suitable blocks for taking mortice locks, latches, or other fittings all as specified and directed | 6.84 | sqm | |
| 25 | 25 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed | 4.56 | sqm | |
| 26 | 26 | Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheets complete as specified and directed | 50 | sqm | |
| 27 | 27 | Fixing only in repairs pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with new/old self tapping screws complete as specified and directed | 50 | sqm | |
| 28 | 28 | Supply and fix prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheets complete as specified and directed | 7 | sqm | |
| 29 | 29 | Material and labour for Welding in repairs n. exc 2.5cm in length,thickness of metal to be welded not exceeding 6mm complete as specified and directed | 30 | Each | |
| 30 | 30 | Supply and fix in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified and directed | 40 | sqm | |
| 31 | 31 | Supply and fix in repairs 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete as specified and directed | 20 | sqm | |
| 32 | 32 | Supply and fix 4.0mm thick Sheet glass,light shade exceeding 0.5sqm in each pane, cut to required size fixed with neoprene/PVC gasket etc as in windows/doors complete as specified and directed | 5 | sqm | |
| 33 | 33 | Supply and fix in repairs Floor door stopper of brass body and tongue with hard drawn steel spring, overall length of cover plate 150mm complete as specified and directed | 3 | Each | |
| 34 | 34 | Supply and fix in repairs aluminium die cast body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete as specified and directed | 6 | Each | |
| 35 | 35 | Supply and fix in repairs aluminium curtain rod 20mm dia complete as specified and directed | 10.5 | RM | |
| 36 | 36 | Supply and fix in repairs aluminium brackets for curtain rod of approved pattern complete as specified and directed | 14 | Per Pair | |
| 37 | 37 | Supply and fix in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete as specified and directed | 4 | Each | |
| 38 | 38 | Supply and fix butt hinge of size 100mm,medium weight, cold rolled mild steel,complete as specified and directed | 24 | Each | |
| 39 | 39 | Supply and fix in repairs butt hinge of size 100mm,medium weight, cold rolled mild steel,complete as specified and directed | 24 | Each | |
| 40 | 40 | Supply and fix in repairs mild steel barrel tower\nbolts, length of bolt 150mm stove enamelled black, with bright bolt complete as specified and directed | 20 | Each | |
| 41 | 41 | Supply and fix in repairs Aluminium anodised,barrel tower bolts of extruded section,length of bolt 150mm complete as specified and directed | 20 | Each | |
| 42 | 42 | Supply and fix Aluminium anodised,barrel tower bolts of extruded section,length of bolt 150mm complete as specified and directed | 8 | Each | |
| 43 | 43 | Supply and fix ,Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) length of bolt 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete as specified and directed | 6 | Each | |
| 44 | 44 | Supply and fix in repairs mild steel sliding door bolts,length of bolt 300mm,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete as specified and directed | 12 | Each | |
| 45 | 45 | Supply and fix in repairs Aluminium handle of size 150mm, cast type,anodised of pattern/design as approved complete as specified and directed | 20 | Each | |
| 46 | 46 | Supply and fix Aluminium handle of size 150mm, cast type,anodised of pattern/design as approved complete as specified and directed | 8 | Each | |
| 47 | 47 | Supply and fix in repairs mild steel pressed handle of size 150mm, oval type,stove enamelled black of pattern/design as approved complete as specified and directed | 16 | Each | |
| 48 | 48 | Supply and fix mild steel pressed handle of size 150mm, oval type,stove enamelled black of pattern/design as approved complete as specified and directed | 12 | Each | |
| 49 | 49 | Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed | 10 | RM | |
| 50 | 50 | Supply, lay connect and test 15mm bore of tube steel water tubing medium grade, galvanised with and including all fittings like tees, bends, unions(compulsory for every branch), connector pieces etc with screwed socket joints & fixed complete to walls and ceilings or laid in floors including taking up or down old tubing and including necessary cutting chases in brick/concrete walls/ceilings/floors and making good the disturbed surfaces in cement mortar 1:4 all as specified and directed.\n | 40 | RM | |
| 51 | 51 | Supply, lay connect and test 20mm bore of tube steel water tubing medium grade, galvanised with and including all fittings like tees, bends, unions(compulsory for every branch), connector pieces etc with screwed socket joints & fixed complete to walls and ceilings or laid in floors including taking up or down old tubing and including necessary cutting chases in brick/concrete walls/ceilings/floors and making good the disturbed surfaces in cement mortar 1:4 all as specified and directed.\n | 60 | RM | |
| 52 | 52 | Supply and fix in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup all as specified and directed.\n | 6 | Each | |
| 53 | 53 | Supply and fix in repairs 15mm bore dia of pipe fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.\n | 20 | Each | |
| 54 | 54 | Supply and fix in repairs 15mm bore dia of pipe fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe all as specified and directed.\n | 6 | Each | |
| 55 | 55 | Supply and fix in repairs 15mm bore dia of pipe fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions all as specified and directed. | 20 | Each | |
| 56 | 56 | Supply and fix in repairs 15mm bore dia of pipe Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) all as specified and directed. | 15 | Each | |
| 57 | 57 | Supply and fix in repairs Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) all as specified and directed. | 8 | Each | |
| 58 | 58 | Supply & Fix in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests,including connection to trap and to flushing pipe, anti-syphonage pipe, etc,including lime concrete bedding as specified in SSR part II and including 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern PTMT nuts 600mm complete all as specified and directed. | 2 | Each | |
| 59 | 59 | Supply & Fix in repairs 10 litres capacity PVC valveless,syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. | 3 | Each | |
| 60 | 60 | Supply & Fix in repairs vitreous china wash basin, white, angle back of size 600 x 480mm excluding waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste pipe 32mm dia 750mm long and including 15mm bore dia of pipe pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed | 6 | Each | |
| 61 | 61 | Supply & Fix in repairs Vitreous China wash down water closet pan ( pedestal pattern ),white including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern and providing PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. | 3 | Each | |
| 62 | 62 | Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. | 10 | Each | |
| 63 | 63 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. | 20 | Each | |
| 64 | 64 | Supply and fix in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes with fittings complete all as specified and directed. | 35 | RM | |
| 65 | 65 | Supply and fix in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes with fittings complete all as specified and directed. | 25 | RM | |
| 66 | 66 | Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. | 8 | Each | |
| 67 | 67 | Supply and fix PVC (SWR) floor trap,diameter of outlet 75 mm plain with stainless steel grating including jointing with solvent cement complete all as specified and directed. | 8 | Each | |
| 68 | 68 | Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. | 4 | Each | |
| 69 | 69 | Supply and fix 110mm bore PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified and directed. | 12 | Each | |
| 70 | 70 | Supply and fix 75mm bore PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified and directed. | 8 | Each | |
| 71 | 71 | Supply and fix 110mm bore PVC vent cowl complete all as specified and directed. | 4 | Each | |
| 72 | 72 | Material and labour for preparation of new plastered surfaces of walls, and applying two coats of oil bound distemper (any tint) over a coat of chalk whitening primer prior to distempering all as specified and directed | 100 | sqm | |
| 73 | 73 | Material and labour for preparation of complete removal of existing treatment from surfaces of walls,applying 3mm thick wall care putty and applying two coats of oil bound distemper (any tint) over a primer coat of alkali resistant priming paint including preparing surfaces all as specified and directed | 200 | sqm | |
| 74 | 74 | Material and labour for preparation of old treated surfaces of walls, and applying one coat of oil bound distemper (any tint) all as specified and directed | 1000 | sqm | |
| 75 | 75 | Material and labour for preparation of new plastered surfaces of ceilings and applying three coats of white wash all as specified and directed | 120 | sqm | |
| 76 | 76 | Material and labour for preparation of old treated surfaces of ceilings and applying one coat of white wash all as specified and directed | 150 | sqm | |
| 77 | 77 | Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash all as specified and directed | 30 | sqm | |
| 78 | 78 | Material and labour for preparation of old treated surfaces of walls and applying one coat of white wash all as specified and directed | 50 | sqm | |
| 79 | 79 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion (weather proof Apex) paint over a coat of primer complete all as specified and as directed and as per manufacturers instructions including necesary scaffolds all as specified and directed | 100 | sqm | |
| 80 | 80 | Material and labour for complete removal of existing treatment from external surfaces of walls and applying two coats of exterior emulsion (weather proof Apex) paint over a coat of primer complete all as specified and as directed and as per manufacturers instructions including necesary scaffolds all as specified and directed | 400 | sqm | |
| 81 | 81 | Material and labour for preparation of new or previously untreated surfaces of steel of any description, not otherwise described, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed | 20 | sqm | |
| 82 | 82 | Material and labour for preparation of old/previously treated surfaces of steel of any description, not otherwise described, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed | 120 | sqm | |
| 83 | 83 | Material and labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed | 17.78 | sqm | |
| 84 | 84 | Material and labour for preparation of old/previously treated wooden surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed | 70 | sqm | |
| 85 | 85 | Supply and fix in repairs chromium plated health faucet with 8mm dia with 1.2m long flexible tube and wall hook including bib tap(two way) fancy type chromium plated 15mm bore dia of pipe cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brasss ferrule all as specified and directed.\n | 6 | Each | |
| 86 | 86 | Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium sections as in frames and shutters for doors,windows, ventilators any type with one or more rebates including joining cleat for fixing glazing clips, ruber neoprene packing,handles,hinges and other builders hardware,anodised aluminum snap beading screws etc. complete all as specified and directed.\nNOTE The rate quoted is deemed to be inclusive of all fixtures and fittings,powder coating but not inclusive of glass and wire cloth which shall be measured and paid separately. However for measurement purpose the `kg' will be worked out as per the weight of aluminium section actually incorporated at site and the element of fittings and fixtures is deemed to be included in the rate quoted per kg. | 100 | kg | |
| 87 | 87 | Material & Labour for providing APP based polymeric membrane minimum weight not less than 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150gms/sqm) by torch application( sealed by flame) with over lap of 7.5cm longitudinally and 10 cm transversely including priming surfaces with bituminous primer polymerised primer oil based @ 0.20 kg / sqm prior to application of membrane and finally finished with a coat of solar reflective aluminum paint @ 0.100 Kg/sqm as per manufacturers instructions including taking down of existing water proofing treatment including screed bed and removal from site complete all as specified and directed. | 90 | sqm | |
| 88 | 88 | Material and labour for screed bed 15mm thick on concrete surfaces as in roof in cement mortar 1:4 finished even and fair mixed with water proofing compound at 2% by weight of cement or as per manufacturers instructions whichever is more all as specified and directed.\nNOTE: Supply only integral water proofing compound shall be measured and paid separately | 90 | sqm | |
| 89 | 89 | Supply and fix in repairs 20mm bore dia of pipe Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe all as specified and directed.\n | 12 | each | |
| 90 | 90 | Disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres(including 1000 litres tank), setting aside (or lowering if required) for repairs and including cleaning and removing all scale and dirt, etc, by brooming down completely the sides, top and bottom surfaces of the tank removing fungus scale dirt sludge etc and washing the tank with caustic soda bleaching powder etc to make it free from all foreign matter and from mouths of circulating pipes and hoisting reconnecting and re-fixing in position and removal of the sludge dirt etc outside MD landetc all as specified and as directed. | 12 | Each job | |
| 91 | 91 | Supply and fix 5.5mm thick Sheet glass,light shade fixed with neoprene/PVC gasket etc as in doors complete as specified and directed | 2.75 | sqm | |
| 92 | 92 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed | 2 | sqm | |
| 93 | 93 | Taking down door/window chowkhats or frames with shutters any type (without taking off shutters from the frame) area not exceeding 1.5 sq. m of each including builders hardware and making good the disturbed surfaces complete all as specified and directed | 2 | Each job | |
| 94 | 94 | Material and labour for Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint all as specified and directed | 10 | PER 10 Nos. (PER CM of height) |
AI Tender Summary
Tender Timeline
Jan 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender