| 1 | 1.1 | Schedule-A | | | |
|---|
| 2 | 2 | XLPE insulated ( heavy duty ) armoured electric cable of size 3 core x 6 sqmm. With allumium conductor for use in 3 phase system in working voltage up to 1100 volt at 50 HZ confirming to IS 7098 part -I- 1988 & as per the particulars mentioned . | | 475 | mtr |
|---|
| 3 | 3 | ISI marked high density polyethylene ( HDPE pipe ) for water supply as per IS -4984 / 1995 ( reaffirmed to 2002 )with amendement No.1,2,3,4, & 5 of material grade PE 80 pressure rating PN 6.0 and nominal dia of 63mm with CIPET testing. | | 570 | mtr |
|---|
| 4 | 4 | 200mm dia Tube well well cap | | 19 | no |
|---|
| 5 | 5 | 8 mm Steel Wire Rope with PVC coated | | 665 | mtr |
|---|
| 6 | 6 | 50 mm dia G.I Bend with Socket confirming to lS No.1239 (Pt-II/1992) | | 19 | no |
|---|
| 7 | 7 | 50 mm dia Stainless Steel threaded nipple of 15 Cm long confirming to lS 1239 - Pt-II/1992 | | 38 | NO |
|---|
| 8 | 8 | \" U \" clamp for fixing the submersible cable and wire rope with pipe | | 19 | set |
|---|
| 9 | 9 | Installation of submersible pump inside the bore well fitting of HDPE pipe, tying the pump set with wire rope, connecting the supply line and submersible cable with starter, fixing the pannel board completing all the electrical installation, charging the | | 19 | no |
|---|
| 10 | 10 | Empty pannel board of size ( 110cmx45 cmx25cm) made out of 20 gage CR sahet with stand made of MS angle of 20mm size with 4 nos. of legs of 30cm. Size painting in Navy Blue colour with inscription of OLIC | | 19 | no |
|---|
| 11 | 11 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. | | 7.695 | cum |
|---|
| 12 | 12 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. | | 1.634 | cum |
|---|
| 13 | 13 | Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P requir | | 2.147 | cum |
|---|
| 14 | 14 | Brick work with K.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. | | 7.866 | cum |
|---|
| 15 | 15 | Cement concrete (1:2:4) with 12mm size black C.B. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P r | | 0.4788 | cum |
|---|
| 16 | 16 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required fo | | 51.984 | sqm |
|---|
| 17 | 17 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. | | 7.695 | cum |
|---|
| 18 | 18 | 5.0HP/ 3.75 KW submersible BEE star rated energy efficient pump set coupled with tottally enclosed squirrel cage induction motor bearing model no. VSH-62-n/5 with bronze impeller, stainless steel shaft delivery discharge 5.00 LPS at 40mtrs. Head with cable clip, support clamp etc. suitable for operation at 415+6%,-15%, 3phase, 50HZ, AC power supply as per the particular mentioned in schedule-\"A\" enclosed. | | 19 | no |
|---|
| 19 | 19 | Cost of Control pannel with stater sheet steel enclosure suitable for operation of squirrel cage induction motors up to 5.0HP having maximum full load current 10.0Amps. At415V+6%, 3phase, 50HZ AC supply with over load rlay range) 5.5-8.0Amps to 7.0-10.0 Amps. and no volt coil suitable for operation at voltage range of 350-440V. The control panel should provide with dependable protection against over load, single phasing and short circuit. | | 19 | no |
|---|
| 20 | 20 | Writing of display board in synthetic paint as per direction of the site Enineer in Charge. | | 3 | No |
|---|
| 21 | 21 | 3 core 1.5 sqmm submersible Flat Cable with bunched copper conductor insulated and sheathed with PVC for submersible pump motor with voltage up to 1100volt confirming to IS 694/1990 | | 665 | mtr |
|---|
| 22 | 22 | Schedule-B | | | |
|---|
| 23 | 23 | Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with 300 Kg. 9 Mtr. Long PSC pole support in 60 Mtr. Span.55sqmm AAA Conductor with double disc arrangement,11KV \"V\" cross arm with required nos. of 11 KV B & S disc. Insul | | 1.2 | Km |
|---|
| 24 | 24 | Installation of 63 KVA,11/.4 KV Pole mounted Sub-Station using 9 Mtr long PSC pole with (AI) BIS Energy Level - Stare Ratted Transformer as per the specification & estimate of DISCOM | | 3 | No |
|---|
| 25 | 25 | Barbed Fencing (Size 15'X 10') with construction of retaining wall, erection of RCC fencing post, sand filling and metals spreading fixing of iron grill gate etc. as per CESU specification. | | 3 | NO |
|---|
| 26 | 26 | Construction of 3 phase L.T. Line with supports of 200 kg PSC pole of 8 mtrs. Long of span length 40 mtrs. With 3x35+1x25 mm2 XLPE A.B. Cable with required materials, piercing connector, Pannel, etc. including cost of materials, labour, transportation e | | 3.2 | Km |
|---|
| 27 | 27 | Pipe earthing with No.8 GI wire using required quantity of common salt, charcoal , GI nut bolt including digging the earth pit of size 1.2mtr. X 1.2mtr.x3mtr. And digging the wire trench and refilling after completion of earthing including supply of all | | 3 | set (2nos) |
|---|
