Department Of Industries And Commerce has published Procurement Of Advanced Toolkits For Handicraft And Furniture Making ( Package 1 ) . Submission Date for this Tender is 08-02-2021. Cutting Crimping and Punching Tools Tenders in Bamunimaidam Ghy Assam. Bidders can get complete Tender details and download the document.
Name of Work: Procurement of Advanced Toolkits for Handicraft & furniture making (Package 1) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | ADVANCED TOOLKIT SET FOR BAMBOO FURNITURE- Bevel / Square Chisel ½ inch &1 inch\nSpecifiction: Single Bevel Sweep Straight Chisel, Sqaure Tang Handle, Cr-Vd Steel, Hand Sharpened, 12mm & 25 mm | item1 | 350 | Nos |
2 | 2 | Wood handle hacksaw with extra blades\nSpecification: 300 mm Wood handled hacksaw with one extra blades | item2 | 350 | Nos |
3 | 3 | Ball peen Hammer 250 Gm. With Wood Handle 12 inches\nSpecification: Forged from High Grade Carbon Steel, Handle of seasoned hard wood, Head is Powder Coated & Lacquer polished, Handle is Laquer Coated, Handle Lenth 12", weight: 9 OZ | item3 | 350 | Nos |
4 | 4 | Measuring Tape 3 meters\nSpecification: Length of tape: 3mtr, width: 16 mm, Accuracy at 20 degrre Centigrade and tension of 50N, Compact Size | item4 | 350 | Nos |
5 | 5 | Steel Scale 12 inches & 24 inches\nSpecification: Stainless steel 202 grade sacle ruler 30 cm & 60 cm, with inside edges polished and grinded,Front edge 1/2 mm, Bottom edge 1/16ths,1/32nd,1/64ths, width 25 mm,Reverse side : conversion table ,Inch to mm | item5 | 350 | Nos |
6 | 6 | Triangular File for sharpening Saw Blade, Length 6 inches, Width 4 mm\nSpecification: Three sqaure 2nd Cut File with handle, Size: 150 mm | item6 | 350 | Nos |
7 | 7 | Tri-square 6 inches\nSpecifiction: Try Square, weight : 170 gm, length: 150 mm, Stainless steel blade 202 grade | item7 | 350 | Nos |
8 | 8 | Angle finder – Arm rule \nSpecification: The Protractor has easy etched reading graduations from 0-180 degrees on opposite direction , Angle Finder Arm has graduations with the range of 0 to 140 mm , Made of Stainless Steel, Elegant Design ,Accurate Graduation and Polished finish. | item8 | 350 | Nos |
9 | 9 | Bamboo Splitting knife ( Dau) \nSpecification: Steel DAU ,local made with wooden Handle | item9 | 350 | Nos |
10 | 10 | Combination Stone 150 mm x50 mm x 20 mm Specification: Grit 120/c240/WA600, Size: 6" x 2" x 1", High strength, smooth surface, | item10 | 350 | Nos |
11 | 11 | Cutting pliers \nSpecification: 200 mm, Made from Cr-vd material | item11 | 350 | Nos |
12 | 12 | Screw driver set \nSpecification: Kit Comprising of 5 pcs with neon bulb | item12 | 350 | Nos |
13 | 13 | Hand plainer (small) \nSpecification: 125mm or 5", Hand Block Planer | item13 | 350 | Nos |
14 | 14 | Power drill \nSpecification: 10 mm Impact Drill Machine\n\nRated Input Power-450 Watts, No Load Speed- 0-2600 RPM, Power Output- 250 Watts, Weight- 2.5 Kg, Power Outpur-250 Watts, Weight according to EPTA Procedure 01:2014 should be <=1.5 Kg, Drill Spindle Connecting Thread- 3/8”-24 UNF, Chuck Capacity-1 -10mm, width- 69mm, lenth-262 mm, height- 180mm, Impact Rate-0-41,600 bpm. \nDrill capacity- brickwall/light density concrete- 10mm, sheet metal- 8mm, wood- 20mm. It should include a cloth wrapper for ergonomic holding of necessary accessories.\nAccessories set includes- 4 concrete, wood and metal drill bits, 10 screwdriver bits, 30 screws and nylon plugs\n | item14 | 350 | Nos |
15 | 15 | Hand held angle grinder 4 inch \nSpecification: 100mm Angle Grinder\n\nAngle Grinder 100 mm having Rated Input Power-660 Watts of No-Load Speed- 11,000 rpm, output power-405 Watts, Grinding Spindle Thread-M10, Length- 270 mm, Height-80 mm, Weight according to EPTA Procedure 01:2014 with standard auxillary handle should be <=1.7 Kg with double insulation and durable on-off back switch. Testing standard for the tool should be according to (EN 55014-1,2, A1,A2), (61000 3-2, 3-3), (CISPR 14-1,2,A1,A2), (IEC 61000 3-2, 3-3).\nAccessories- protection guard, clamping flange, locking nut, wrench\n | item15 | 350 | Nos |
16 | 16 | Hot Air Gun \nSpecification: Variable Airflow: 350, 350, 550 lt/min , corresponding temperature at nozzle outlet- 60, 350, 550 degree celcius: , Power input 1800 watt with overheat protection, Voltage 230V, weight according to EPTA Procedure 01:2014 should be <= 0.75 kg. Width-83 mm, Length-238 mm and Height- 244 mm, Sound Pressure should be less than 70 db, should have a flat surface at the back for keeping the tool on the ground in idle condition, Accessories- Reduction Nozzle | item16 | 350 | Nos |
17 | 17 | Drill bit set \nSpecification: Twist Drill Bit set 10 pcs, Hi Speed Steel Drill Bit Set Range 1mm - 10 mm, Metal Drill Bits with A-Tip with 135 degree tip angle | item17 | 350 | Nos |
18 | 18 | Gas blow torch complete set ready to use Specification: Butane Gas Blow Torch,125 gm, | item18 | 350 | Set |
19 | 19 | Fastener drill bet set \nSpecification:chisel head drill bit set | item19 | 350 | Nos |
20 | 20 | Bag for tools\nSpecification: High Grade waterproof material, Size: 450mm x 230 mm x 300 mm or Big Size , tool bag to keep all tools of this package | item20 | 350 | Nos |
21 | 21 | IMPROVED TOOLKIT SET FOR HANDICRAFTS ACCESORY PRODUCTS-- Bevel / Square Chisel 1/2 inch & 1inch Specification:Single Bevel Sweep Straight Chisel, Sqaure Tang Handle, Cr-Vd Steel, Hand Sharpened, 12mm & 25 mm | item21 | 422 | Nos |
22 | 22 | Wood handle hacksaw with extra blades Specification: 300 mm Wood handled hacksaw with one extra blades | item22 | 422 | Nos |
23 | 23 | Fret saw (hack saw – small) \nSpecification:A Flat bar Frame with dura Steel Pins, Hi Speed Steel Blade | item23 | 422 | Nos |
24 | 24 | Ball peen Hammer 250 Gm. With Wood Handle 12 inches \nSpecification:Forged from High Grade Carbon Steel, Handle of seasoned hard wood, Head is Powder Coated & Lacquer polished, Handle is Laquer Coated, Handle Lenth 12", weight: 9 OZ | item24 | 422 | Nos |
25 | 25 | Measuring Tape 3 meters \nSpecifcation:Length of tape: 3mtr, width: 16 mm, Accuracy at 20 degrre Centigrade and tension of 50N, Compact Size | item25 | 422 | Nos |
26 | 26 | Steel Scale 12 inches \nSpecification:Stainless steel 202 grade sacle ruler 30 cm, with inside edges polished and grinded Front edge 1/2 mm, Bottom edge 1/16ths,1/32nd,1/64ths, width 25 mm, Reverse side : conversion table ,Inch to mm | item26 | 422 | Nos |
27 | 27 | Triangular File for sharpening Saw Blade, Length 6 inches, Width 4 mm \nSpecification:Three sqaure 2nd Cut File with handle, Size: 150 mm | item27 | 422 | Nos |
28 | 28 | Tri-square 6 inches\nSpecification: Try Square, length: 150 mm, Stainless steel blade 202 grade | item28 | 422 | Nos |
29 | 29 | Angle finder – Arm rule \nSpecification:The Protractor has easy etched reading graduations from 0-180 degrees on opposite direction , Angle Finder Arm has graduations with the range of 0 to 140 mm , Made of Stainless Steel, Elegant Design ,Accurate Graduation and Polished finish. | item29 | 422 | Nos |
30 | 30 | Bamboo Splitting knife ( Dau) \nSpecification: Steel DAU ,local made with wooden Handle | item30 | 422 | Nos |
31 | 31 | Combination Stone 150 mm x50 mm x 20 mm Specification: Grit 120/c240/WA600, Size: 6" x 2" x 1", High strength, smooth surface, | item31 | 422 | Nos |
32 | 32 | Cutting pliers \nSpecification: 200 mm, Made from Cr-vd material | item32 | 422 | Nos |
33 | 33 | Screw driver set \nSpecification: Kit Comprising of 5 pcs with neon bulb | item33 | 422 | Nos |
34 | 34 | Hand planner (small) \nSpecification: 125mm or 5", Hand Block Planer | item34 | 422 | Nos |
35 | 35 | Hand held Power Drill\nSpecification: 10 mm Impact Drill Machine\n\nRated Input Power-450 Watts, No Load Speed- 0-2600 RPM, Power Output- 250 Watts, Weight- 2.5 Kg, Power Outpur-250 Watts, Weight according to EPTA Procedure 01:2014 should be <=1.5 Kg, Drill Spindle Connecting Thread- 3/8”-24 UNF, Chuck Capacity-1 -10mm, width- 69mm, lenth-262 mm, height- 180mm, Impact Rate-0-41,600 bpm. \nDrill capacity- brickwall/light density concrete- 10mm, sheet metal- 8mm, wood- 20mm. It should include a cloth wrapper for ergonomic holding of necessary accessories.\nAccessories set includes- 4 concrete, wood and metal drill bits, 10 screwdriver bits, 30 screws and nylon plugs\n | item35 | 422 | Nos |
36 | 36 | Hand held angle grinder 4 inch \nSpecification: 100mm Angle Grinder\n\nAngle Grinder 100 mm having Rated Input Power 660 Watts of No-Load Speed- 11,000 rpm, output power-405 Watts, Grinding Spindle Thread-M10, Length- 270 mm, Height-80 mm, Weight according to EPTA Procedure 01:2014 with standard auxillary handle should be <=1.7 Kg with double insulation and durable on-off back switch. Testing standard for the tool should be according to (EN 55014-1,2, A1,A2), (61000 3-2, 3-3), (CISPR 14-1,2,A1,A2), (IEC 61000 3-2, 3-3).\nAccessories- protection guard, clamping flange, locking nut, wrench\n | item36 | 422 | Nos |
37 | 37 | Drill bit set \nSpecification:Twist Drill Bit set 10 pcs, Hi Speed Steel Drill Bit Set Range 1mm - 10 mm, Metal Drill Bits with A-Tip with 135 degree tip angle | item37 | 422 | Nos |
38 | 38 | Bag for the tools \nSpecification: High Grade waterproof material, Size: 450mm x 230 mm x 300 mm or Big Size , tool bag to keep all tools of this package | item38 | 422 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail