Gmc Ekm Renovation Works In Casualty Block The Estimate Is Prepared For Converting The Ground Floor Of Casualty Block To Surgical Casualty The First Floor Of This Block To Operation Theatre And The Connected Facilities
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jan 2021
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalamassery → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Gmc Ekm Renovation Works In Casualty Block The Estimate Is Prepared For Converting The Ground Floor Of Casualty Block To Surgical Casualty The First Floor Of This Block To Operation Theatre And The Connected Facilities
BOQ
| Work Name:GMC EKM: Renovation works in Casualty Block. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | works | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | 15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001114 | 323.738 | sqm |
| 3 | 1.02 | 15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | BI01010001010000000000000515BI0100001115 | 0.25 | cum |
| 4 | 1.03 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | BI01010001010000000000000515BI0100001116 | 12.215 | cum |
| 5 | 1.04 | 15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001117 | 20 | each |
| 6 | 1.05 | 15.12.2 : Of area beyond 3 sq. metresOf area beyond 3 sq. metres | BI01010001010000000000000515BI0100001118 | 2 | each |
| 7 | 1.06 | 15.17.1 : Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:R.S. Joists | BI01010001010000000000000515BI0100001119 | 800 | kg |
| 8 | 1.07 | 15.44.2 : Dismantling G.I. pipes ( external work) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer- in- Charges:Above 40 mm nominal bore | BI01010001010000000000000515BI0100001120 | 100 | metre |
| 9 | 1.08 | 15.45.1 : Dismantling C.I pipes including excavation and refilling trenches after taking out the pipes, manually / by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer - in- Charge:Up to 150 mm diameter | BI01010001010000000000000515BI0100001121 | 128 | metre |
| 10 | 1.09 | 50.14.1.1 : Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001122 | 30 | each |
| 11 | 1.1 | 15.18 : Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | BI01010001010000000000000515BI0100001123 | 750 | kg |
| 12 | 1.11 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001124 | 11.438 | cum |
| 13 | 1.12 | 10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001125 | 250 | kilogram |
| 14 | 1.13 | od53088/2020_2021 : Providing decking G.S. sheet slab of 300 mm profile pitch with 75 mm profile depth including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with including sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\r0.80 mm thick with zinc coating less than 275 gm/m2 | BI01010001010000000000000515BI0100001126 | 31.08 | sqm |
| 15 | 1.14 | 16.70.1 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm | BI01010001010000000000000515BI0100001127 | 31.08 | sqm |
| 16 | 1.15 | 5.8 : Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1 cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1 cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001128 | 1.999 | cum |
| 17 | 1.16 | 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001129 | 1.78 | cum |
| 18 | 1.17 | 50.6.6.3 : Hollow block masonry using pre cast solid blocks ( Factory made ) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure above floor two level upto floor five level for 10cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand ) including cost of scaffolding etc complete | BI01010001010000000000000515BI0100001130 | 1.205 | cum |
| 19 | 1.18 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001131 | 28.21 | sqm |
| 20 | 1.19 | 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | BI01010001010000000000000515BI0100001132 | 7.2 | sqm |
| 21 | 1.2 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001133 | 35.41 | sqm |
| 22 | 1.21 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001134 | 18.36 | sqm |
| 23 | 1.22 | 14.65.1 : Finishing walls with textured exterior paint of required shade:Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm | BI01010001010000000000000515BI0100001135 | 1200 | sqm |
| 24 | 1.23 | od53262/2020_2021 : Re-polishing Stone work rubbing and polishing complete. Kota stone slabs exposed face dressed and rubbed.\rany thick | BI01010001010000000000000515BI0100001136 | 24.75 | sqm |
| 25 | 1.24 | 14.59.1 : Polishing on wood work with ready made wax polish of approved brand and manufacture:Old work | BI01010001010000000000000515BI0100001137 | 210 | sqm |
| 26 | 1.25 | 50.9.15.5 : Providing and fixing iron hooks and eyes: 100 mm | BI01010001010000000000000515BI0100001138 | 15 | no |
| 27 | 1.26 | 50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | BI01010001010000000000000515BI0100001139 | 15 | metre |
| 28 | 1.27 | 50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | BI01010001010000000000000515BI0100001140 | 8 | metre |
| 29 | 1.28 | 50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow | BI01010001010000000000000515BI0100001141 | 5 | no |
| 30 | 1.29 | 50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl | BI01010001010000000000000515BI0100001142 | 2 | no |
| 31 | 1.3 | 50.18.9.22.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap | BI01010001010000000000000515BI0100001143 | 50 | no |
| 32 | 1.31 | 18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001144 | 84 | metre |
| 33 | 1.32 | 50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | BI01010001010000000000000515BI0100001145 | 56 | metre |
| 34 | 1.33 | 50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | BI01010001010000000000000515BI0100001146 | 24 | metre |
| 35 | 1.34 | 50.18.8.9.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 | BI01010001010000000000000515BI0100001147 | 18 | metre |
| 36 | 1.35 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001148 | 30 | metre |
| 37 | 1.36 | 50.18.9.20.3 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow | BI01010001010000000000000515BI0100001149 | 12 | no |
| 38 | 1.37 | 50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend | BI01010001010000000000000515BI0100001150 | 12 | no |
| 39 | 1.38 | 50.18.9.20.6 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee | BI01010001010000000000000515BI0100001151 | 12 | no |
| 40 | 1.39 | 50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer | BI01010001010000000000000515BI0100001152 | 12 | no |
| 41 | 1.4 | 50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow | BI01010001010000000000000515BI0100001153 | 12 | no |
| 42 | 1.41 | 50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001154 | 4 | no |
| 43 | 1.42 | 50.18.78 : Making chases up to 12.5x12.5 cm in walls including making good and finishing with matching surface after housing pipe etc. | BI01010001010000000000000515BI0100001155 | 2.7 | metre |
| 44 | 1.43 | 18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001156 | 20 | metre |
| 45 | 1.44 | 18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore | BI01010001010000000000000515BI0100001157 | 20 | each |
| 46 | 1.45 | 18.33.1 : Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001158 | 2 | each |
| 47 | 1.46 | 18.49.1 : Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore | BI01010001010000000000000515BI0100001159 | 79 | each |
| 48 | 1.47 | 50.18.9.22.11 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling | BI01010001010000000000000515BI0100001160 | 24 | no |
| 49 | 1.48 | 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001161 | 20 | each |
| 50 | 1.49 | 17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001162 | 20 | each |
| 51 | 1.5 | 50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop | BI01010001010000000000000515BI0100001163 | 10 | no |
| 52 | 1.51 | 50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001164 | 15 | no |
| 53 | 1.52 | 50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | BI01010001010000000000000515BI0100001165 | 7 | no |
| 54 | 1.53 | 50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001166 | 12 | no |
| 55 | 1.54 | 14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001167 | 3069.06 | sqm |
| 56 | 1.55 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001168 | 2902.56 | sqm |
| 57 | 1.56 | 13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001169 | 28.21 | sqm |
| 58 | 1.57 | 13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work | BI01010001010000000000000515BI0100001170 | 152.64 | sqm |
| 59 | 1.58 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001171 | 126.735 | sqm |
| 60 | 1.59 | 11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001172 | 43 | sqm |
| 61 | 1.6 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001173 | 473.972 | sqm |
| 62 | 1.61 | od51643/2020_2021 : Proving and fixing PVC door shutter(80*210cm )30mmthickness with frame including all fittings etc. | BI01010001010000000000000515BI0100001174 | 10 | each |
| 63 | 1.62 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001175 | 51.75 | sqm |
| 64 | 1.63 | 14.6.1 : Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001176 | 3.4 | sqm |
| 65 | 1.64 | 9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | BI01010001010000000000000515BI0100001177 | 265.776 | kg |
| 66 | 1.65 | 21.1.1.2 : For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001178 | 908.002 | kg |
| 67 | 1.66 | 21.1.2.1 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001179 | 374.425 | kg |
| 68 | 1.67 | 21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001180 | 113.2 | sqm |
| 69 | 1.68 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001181 | 113.2 | sqm |
| 70 | 1.69 | 21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness | BI01010001010000000000000515BI0100001182 | 20 | each |
| 71 | 1.7 | 21.17 : Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | BI01010001010000000000000515BI0100001183 | 8.4 | kg |
| 72 | 1.71 | 21.19.2 : Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/\nBrick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural\nnon sag elastomeric PU sealant over backer rod of approved quality as per\narchitectural drawings and direction of Engineer-in-charge complete,\ncomplying to ASTM C920, DIN 18540-F & ISO 11600Upto 10 mm depth and 10 mm width | BI01010001010000000000000515BI0100001184 | 20 | metre |
| 73 | 1.72 | od53533/2020_2021 : Providing and Fixing 15 mm densified eco friendly light weight gypsum board false ceiling sheet of approved texture in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, at 600 mm centre to centre to form a grid of 600x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges gypsum board of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 600mm centre to centre along for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. humidity resistance and also having thermal conductivity < 0.043 w/m 0 KC. | BI01010001010000000000000515BI0100001185 | 72 | sqm |
| 74 | 1.73 | 25.1 : Providing and supplying aluminium extruded tubular and other aluminium sections\nas per the architectural drawings and approved shop drawings , the aluminium\nquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder\ncoating of 60-80 microns conforming to AAMA 2604 of required colour and shade\nas approved by the Engineer-in-Charge. ( The item includes cost of material such\nas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium\nframe work. Nothing extra shall be paid on this account).Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account). | BI01010001010000000000000515BI0100001186 | 124 | kg |
| 75 | 1.74 | 25.2 : Designing, fabricating, testing, protection, installing and fixing in position semi\n(grid) unitized system of structural glazing (with open joints) for linear as well as\ncurvilinear portions of the building for all heights and all levels, including:\na) Structural analysis & design and preparation of shop drawings for the specified\ndesign loads conforming to IS 875 part III (the system must passed the proof test\nat 1.5 times design wind pressure without any failure), including functional design\nof the aluminum sections for fixing glazing panels of various thicknesses, aluminium\ncleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps\netc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke\nseals, microwave cured EPDM gaskets for water tightness, pressure\nequalisation & drainage and protection against fire hazard including:\nb) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of\n6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3\nDimentional movement for achieving perfect verticality and fixing structural glazing\nsystem rigidly to the RCC/ masonry/structural steel framework of building structure\nusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic\ncontacts with nuts and washers etc. of stainless steel grade 316, of the required\ncapacity and in required numbers.\nc) Providing and filling, two part pump filled, structural silicone sealant and one\npart weather silicone sealant compatible with the structural silicone sealant of\nrequired bite size in a clean and controlled factory / work shop environment ,\nincluding double sided spacer tape, setting blocks and backer rod, all of approved\ngrade, brand and manufacture, as per the approved sealant design, within and all\naround the perimeter for holding glass.\nd) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick\nand of sizes, shapes and profiles, as required as per the site conditions, to seal the\ngap between the building structure and all its interfaces with curtain glazing to\nmake it watertight.\ne) Making provision for drainage of moisture/ water that enters the curtain glazing\nsystem to make it watertight, by incorporating principles of pressure equalization,\nproviding suitable gutter profiles at bottom (if required), making necessary holes\nof required sizes and of required numbers etc. complete. This item includes cost\nof all inputs of designing, labour for fabricating and installation of aluminium grid,\ninstallation of glazed units, T&P, scaffolding and other incidental charges including\nwastages etc., enabling temporary structures and services, cranes or cradles etc.\nas described above and as specified. The item includes the cost of getting all the\nstructural and functional design including shop drawings checked by a structural\ndesigner, dully approved by Engineer-in-charge.\nThe item also includes the cost of all mock ups at site, cost of all samples of the\nindividual components for testing in an approved laboratory, field tests on the\nassembled working structural glazing as specified, cleaning and protection till the\nhanding over of the building for occupation. In the end, the Contractor shall provide\na water tight structural glazing having all the performance characteristics etc. all\ncomplete as required, as per the Architectural drawings, as per item description,\nas specified, as per the approved shop drawings and as directed by the Engineerin-\nCharge.\nNote:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded\naluminium section capping for fixing in the grooves of the curtain glazing and\nvermin proof stainless steel wire mesh shall be paid for separately under relevant\nitems under this sub-head. However, for the purpose of payment, only the actual\narea of structural glazing (including width of grooves ) on the external face shall\nbe measured in sqm. up to two decimal places.\nNote:-2. The following performance test are to be conducted on structural glazing\nsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratories\naccreditated by NABL(National Accreditation Board for Testing and Calibration\nLaboratories), Department of Science & Technologies, India. Cost of testing is\npayable separately. The NIT approving authority will decide the necessity of testing\non the basis of cost of the work, cost of the test and importance of the work.\nPerformance Testing of Structural glazing system\nTests to be conducted in the NBL Certified laboratories\n1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to\n+300pa) as per\nASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”\n2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing\nmethod for a range up to 2000 ml.”\n3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing\nmethod for a range upto 2000 ml”\n4. Structural Performance Deflection and deformation by static air pressure test\n(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing\nmethod for a range upto 50 mm”\n5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for\nQualitative test” Tests to be conducted on site\n6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)\nupto 2000ml”Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade 316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board for Testing and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml” | BI01010001010000000000000515BI0100001187 | 71.8 | sqm |
| 76 | 1.75 | 14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . | BI01010001010000000000000515BI0100001188 | 96 | sqm |
| 77 | 1.76 | 10.3 : Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer .Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer . | BI01010001010000000000000515BI0100001189 | 15.5 | sqm |
| 78 | 1.77 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001190 | 147 | kg |
| 79 | 1.78 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001191 | 72 | kg |
| 80 | 1.79 | 12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001192 | 30 | sqm |
| 81 | 1.8 | 2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil | BI01010001010000000000000515BI0100001193 | 0.162 | sqm |
| 82 | 1.81 | 16.13.2 : Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.Water bound macadam | BI01010001010000000000000515BI0100001194 | 0.54 | cum |
| 83 | 1.82 | 17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001195 | 2 | each |
| 84 | 1.83 | 17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001196 | 5 | each |
| 85 | 1.84 | 17.5.1 : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern | BI01010001010000000000000515BI0100001197 | 2 | each |
| 86 | 1.85 | 17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001198 | 8 | each |
| 87 | 1.86 | 17.29 : Providing and fixing 100 mm sand cast Iron grating for gully trap.Providing and fixing 100 mm sand cast Iron grating for gully trap. | BI01010001010000000000000515BI0100001199 | 12 | each |
| 88 | 1.87 | 17.32.3 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions) | BI01010001010000000000000515BI0100001200 | 8 | each |
| 89 | 1.88 | od53539/2020_2021 : Providing and fixing SS grating 150 mm square | BI01010001010000000000000515BI0100001201 | 9 | each |
| 90 | 1.89 | od53540/2020_2021 : Providing and fixing CP short body 15 mm nominal bore, weighing not less than 85 gms | BI01010001010000000000000515BI0100001202 | 9 | each |
| 91 | 1.9 | od53541/2020_2021 : Providing and fixing CP long body 15 mm nominal bore, weighing not less than 85 gms | BI01010001010000000000000515BI0100001203 | 10 | each |
| 92 | 1.91 | 18.22.1 : Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter | BI01010001010000000000000515BI0100001204 | 8 | each |
| 93 | 1.92 | od53623/2020_2021 : Engaging Plumber for making necessary arrangements for different works | BI01010001010000000000000515BI0100001205 | 2 | each |
| 94 | 1.93 | od53618/2020_2021 : Engaging Scavenger for cleaning drains and other works | BI01010001010000000000000515BI0100001206 | 2 | each |
| 95 | 1.94 | od53619/2020_2021 : Engaging Man mazdooe for different kind of works and and assist skilled labor | BI01010001010000000000000515BI0100001207 | 10 | each |
| 96 | 1.95 | od53620/2020_2021 : Engaging fitter grade labor for different type of works | BI01010001010000000000000515BI0100001208 | 2 | each |
AI Tender Summary
Tender Timeline
Jan 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender