Public Works Department-PWD has published Sitc Of Unitized Substation And Control Panel In Govt College At Kariayavattom , Thiruvananthapuram. Submission Date for this Tender is 30-01-2021. Control Panel Tenders in Thiruvananthapuram Kerala. Bidders can get complete Tender details and download the document.
| Work Name : SITC of Unitized Substation and Control Panel in Govt:College at kariayavattom,Thiruvananthapuram | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART I ELECTRIFICATION | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | od114939/2020_2021 : Supply, conveyance, installation, testing and commissioning of 200 KVA out door unitised sub station comprising of H.T.panel trunked with cast resin Transformer with load break switch/ Air break switch on H.T.side and manually operated, with bottom / top entry cable box as per technical details furnished below. H.T. Portion H.T. Portion consists of (1) 1 No 11K.V, 630A, 26.30 K.A Air break/Load break switch suitable for 3 phase,3wire,50 HZ system with 15 A H.R.C. fuses with earth inter lock with main switch and mechanical ON/OFF indication,(2)shunt trip coil for the remote operation of the the load break switch, (3)1No, 0-12 K.V (or nearest range) voltmeter with selector switch,(4) Cast resin type P.T for consumer metering. Transformer PortionSupply of 315 K.V.A , 11 K.V, 50 HZ, Delta/Star connected cast resin insulated copper wound transformer. The core shall be made of high grade laser scribed core shall be protected against corrosion by epoxy resin finish. Class 'F' insulation level shall be maintained. OFF load tap changing facility shall be incorporated so as to achieve tap position of 2.5% x 4. Temperature scanner with trip annunciator, Blower for cooling to be provided. The transformer shall confirm to IEC 726 and I.S 11171/1985 reaffirmed in 1991 . L.T.Portion The LT portion shall be provided with 1No 320 A 4 pole 35/36 KA MCCB with thermal magnetic setting over current earth fault relay, suitable ratio NCT, Shunt trip in MCCB, as required. All inter connection from HT load break switch to transformer and to LT breaker shall be given using Aluminium bus bars and support insulators. All internal earth connections are to be given as per standards. Necessary protection shall be made for giving cable connections on the HT side as well as LT side. Phase barriers and shrouding as per rules has to be given. The enclosure shall comply to IP 54 standards made of 2 mm GI sheet and shall powder coating the assembly after subjecting to 7 tank process, air ventilation arrangement etc as required. The USS shall be installed as per the directions at site. | BI01010001010000000000000515BI0100001114 | 1 | each |
| 3 | 1.02 | od92193/2020_2021 : Supply installation testing and commissioning of both sides extensible C type Add on unit motorised Scada compatible outdoor front cable entry with additional canopy CT for metering in C limb 1 No SF6 insulated arc quenching load break switch with SF 6 breaker suitable for 11KV/433V Transformer. Add on shall be with terminal protectors protection relays with all materials complete conforming to relevant IS/ IEC standards with 3 years maintenance from date of commissioning | BI01010001010000000000000515BI0100001115 | 1 | each |
| 4 | 1.03 | od89375/2020_2021 : Supply, installation, testing and commissioning of outdoor HT metering cubicle consists of the following;A) Resin cast CT 3Nos., ratio; - /5 or -/ 1 A, 15 VA Class 0.2SB) Resin cast PT 1No., 11kV/110V, 15VA, Class 0.2SC) Test terminal block for TOD meter D)3 Phase, 4 wire, 110 V (L-L), -/1 A CT or -/5A CT, accuracy class 0.2S, TOD meter as per KSEB Standards E) The enclosure shall fabricated using 2mm MS sheet and shall comply with IP 65 standards with dust and vermin proof outdoor type and shall be powder coated after seven tank processing and phosphatising. 11 KV bus bar arrangement with insulator, HT cable termination, Locking facility etc as required. | BI01010001010000000000000515BI0100001116 | 1 | each |
| 5 | 1.04 | od177913/2018_2019 : Supply, laying and clamping of 1 no: 3 core 300 sqm 11 kV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments using clamps fabricated from 20x3 mm MS flat spacing of clamps not exceeding 60 cm, making good the damages, colour washing etc and giving connection as required. | BI01010001010000000000000515BI0100001117 | 30 | metre |
| 6 | 1.05 | od177917/2018_2019 : Supply and laying 3 core 300 sqm 11 kV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments in existing DWC Pipe and giving connection as required. | BI01010001010000000000000515BI0100001118 | 250 | metre |
| 7 | 1.06 | 90.12.12.10 : Supply & laying of DWC pipe in ordinary soil 1.2 m below ground level including excavation160/135 mm or nearest size | BI01010001010000000000000515BI0100001119 | 270 | metre |
| 8 | 1.07 | 5.3 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. | BI01010001010000000000000515BI0100001120 | 2 | set |
| 9 | 1.08 | 10.5.4 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm | BI01010001010000000000000515BI0100001121 | 3 | each |
| 10 | 1.09 | 10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm | BI01010001010000000000000515BI0100001122 | 1 | each |
| 11 | 1.1 | od114566/2018_2019 : Supply and providing plate earthing as per IS 3043 with 1200x1200x12 mm GI/CI earth plate, 50 mm GI watering pipe fixed to the earth plate with 25 x 3mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 450 x 450 x 450 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil) | BI01010001010000000000000515BI0100001123 | 8 | each |
| 12 | 1.11 | 90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip | BI01010001010000000000000515BI0100001124 | 120 | metre |
| 13 | 1.12 | 90.12.5.29 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 50 sq mm | BI01010001010000000000000515BI0100001125 | 70 | metre |
| 14 | 1.13 | 90.12.5.32 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 120 sq mm | BI01010001010000000000000515BI0100001126 | 90 | metre |
| 15 | 1.14 | 90.12.5.33 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 150 sq mm | BI01010001010000000000000515BI0100001127 | 250 | metre |
| 16 | 1.15 | 90.12.5.36 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 300 sq mm | BI01010001010000000000000515BI0100001128 | 20 | metre |
| 17 | 1.16 | 90.12.7.2 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp | BI01010001010000000000000515BI0100001129 | 6 | metre |
| 18 | 1.17 | 90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp | BI01010001010000000000000515BI0100001130 | 8 | metre |
| 19 | 1.18 | 90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp | BI01010001010000000000000515BI0100001131 | 20 | metre |
| 20 | 1.19 | 90.12.7.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm | BI01010001010000000000000515BI0100001132 | 20 | metre |
| 21 | 1.2 | 90.12.7.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 150 sq mm | BI01010001010000000000000515BI0100001133 | 20 | metre |
| 22 | 1.21 | 90.12.7.36 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 300 sq mm | BI01010001010000000000000515BI0100001134 | 20 | metre |
| 23 | 1.22 | 90.12.10.4 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation77/63 mm or nearest size | BI01010001010000000000000515BI0100001135 | 70 | metre |
| 24 | 1.23 | 90.12.10.7 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation120/102.5 mm or nearest size | BI01010001010000000000000515BI0100001136 | 90 | metre |
| 25 | 1.24 | 90.12.10.9 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation145/123 mm or nearest size | BI01010001010000000000000515BI0100001137 | 250 | metre |
| 26 | 1.25 | 9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) | BI01010001010000000000000515BI0100001138 | 2 | set |
| 27 | 1.26 | 9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) | BI01010001010000000000000515BI0100001139 | 2 | set |
| 28 | 1.27 | 9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm) | BI01010001010000000000000515BI0100001140 | 2 | set |
| 29 | 1.28 | 9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm) | BI01010001010000000000000515BI0100001141 | 2 | set |
| 30 | 1.29 | 9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm) | BI01010001010000000000000515BI0100001142 | 2 | set |
| 31 | 1.3 | 9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm) | BI01010001010000000000000515BI0100001143 | 2 | set |
| 32 | 1.31 | 90.12.41.1 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 4 sq mm with factory made clamp | BI01010001010000000000000515BI0100001144 | 20 | metre |
| 33 | 1.32 | od114963/2020_2021 : Supply, providing and giving connection of Surge protection Device 3P+N, 100 KA protection against direct and indirect lighting surges as required. | BI01010001010000000000000515BI0100001145 | 1 | each |
| 34 | 1.33 | od114965/2020_2021 : Supply and providing Panel mounting 12 way brass connector on Bakelite base as required | BI01010001010000000000000515BI0100001146 | 1 | each |
| 35 | 1.34 | od114967/2020_2021 : Supply and providing Panel mounting fresh air fan150 mm as required | BI01010001010000000000000515BI0100001147 | 1 | each |
| 36 | 1.35 | od90061/2020_2021 : Supply and providing Red, Green, Black, Yellow, Orange colours LED indicators, AC/DC 22.5mm cut out dia | BI01010001010000000000000515BI0100001148 | 3 | each |
| 37 | 1.36 | od90063/2020_2021 : Supply and providing 300/5 A, 5 VA, accuracy class 0.5 resin cast metering CT | BI01010001010000000000000515BI0100001149 | 4 | each |
| 38 | 1.37 | od114961/2020_2021 : Supply, providing and giving connection of Multi function meter to read: V, A, F, 3 phase accuracy class 1 etc as required. | BI01010001010000000000000515BI0100001150 | 1 | each |
| 39 | 1.38 | od114997/2020_2021 : Supply and providing APFC controller of 1 CT input 8 step, 415 V giving connection commissioning etc as required. | BI01010001010000000000000515BI0100001151 | 1 | each |
| 40 | 1.39 | od114999/2020_2021 : Supply, installation and giving connection of 230 V Emergency push button station / manual call points (Brake Glass type) with hammer and chain. | BI01010001010000000000000515BI0100001152 | 1 | each |
| 41 | 1.4 | 7.9 : Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X50 cm at the top with a thickness of 10cm including inscription duly engraved as required. | BI01010001010000000000000515BI0100001153 | 20 | each |
| 42 | 1.41 | 90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | BI01010001010000000000000515BI0100001154 | 25 | sqm |
| 43 | 1.42 | 90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | BI01010001010000000000000515BI0100001155 | 6 | sqm |
| 44 | 1.43 | 90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet | BI01010001010000000000000515BI0100001156 | 90 | metre |
| 45 | 1.44 | 90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | BI01010001010000000000000515BI0100001157 | 10 | metre |
| 46 | 1.45 | 90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | BI01010001010000000000000515BI0100001158 | 100 | kg |
| 47 | 1.46 | 90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. | BI01010001010000000000000515BI0100001159 | 15000 | Cum cm |
| 48 | 1.47 | 90.14.7 : Supply and providing copper earth bus in the panel board | BI01010001010000000000000515BI0100001160 | 1200 | Cum cm |
| 49 | 1.48 | 90.14.24.55 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel with block reactor. | BI01010001010000000000000515BI0100001161 | 2 | each |
| 50 | 1.49 | 90.14.24.58 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.10 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel with block reactor. | BI01010001010000000000000515BI0100001162 | 1 | each |
| 51 | 1.5 | 90.14.24.61 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.20 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel with block reactor. | BI01010001010000000000000515BI0100001163 | 1 | each |
| 52 | 1.51 | od89975/2020_2021 : Supply and providing Block Reactor Transformers, Copper wound 400 V suitable for 20 KVAR 460 V, suitable for filtering harmonics upto 7% THD on existing panel board and giving connection. | BI01010001010000000000000515BI0100001164 | 1 | no |
| 53 | 1.52 | od89744/2020_2021 : Supply and providing Block Reactor Transformers, 400 V suitable for 10 KVAR 460 V, suitable for filtering harmonics upto 7% THD on existing panel board and giving connection. | BI01010001010000000000000515BI0100001165 | 1 | no |
| 54 | 1.53 | od89746/2020_2021 : Supply and providing Block Reactor Transformers, Copper wound,400 V suitable for 5 KVAR 460 V, suitable for filtering harmonics upto 7% THD on existing panel board and giving connection. | BI01010001010000000000000515BI0100001166 | 2 | no |
| 55 | 1.54 | od89981/2020_2021 : Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 20 kVAR with AC Coil, in the existing panel board and giving connection. | BI01010001010000000000000515BI0100001167 | 1 | each |
| 56 | 1.55 | od89750/2020_2021 : Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 4 - 7 kVAR with AC Coil, in the existing panel board and giving connection. | BI01010001010000000000000515BI0100001168 | 1 | each |
| 57 | 1.56 | od89752/2020_2021 : Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 7.5 - 10 kVAR with AC Coil, in the existing panel board and giving connection. | BI01010001010000000000000515BI0100001169 | 1 | each |
| 58 | 1.57 | od89754/2020_2021 : Supply and providing Illuminated Flush head Actuator - Red with legend 'OFF', (Contact - 1 NC) in the existing panel board and giving connection. | BI01010001010000000000000515BI0100001170 | 5 | each |
| 59 | 1.58 | od89756/2020_2021 : Supply and providing Illuminated Flush head Actuator - Green with legend 'ON', (Contact - 1 NO) in the existing panel board and giving connection. | BI01010001010000000000000515BI0100001171 | 5 | each |
| 60 | 1.59 | od89762/2020_2021 : Supply and providing Danger 415 V, 150 x 100 mm aluminium anodised legend plates in the existing panel board as required. | BI01010001010000000000000515BI0100001172 | 3 | each |
| 61 | 1.6 | od89764/2020_2021 : Supply and providing Danger 415 V, 200 x 150 mm aluminium anodised legend plates in the existing panel board as required. | BI01010001010000000000000515BI0100001173 | 3 | each |
| 62 | 1.61 | od89766/2020_2021 : Painting letters or figures of the 2.5 cm, 4 cm or 5 cm height sizes with enamel paint as identification mark to SB, DB, Panel board as required. | BI01010001010000000000000515BI0100001174 | 200 | each |
| 63 | 1.62 | 2.1.3 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N | BI01010001010000000000000515BI0100001175 | 1 | each |
| 64 | 1.63 | 2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N | BI01010001010000000000000515BI0100001176 | 2 | each |
| 65 | 1.64 | 2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N | BI01010001010000000000000515BI0100001177 | 1 | each |
| 66 | 1.65 | 2.1.5 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N | BI01010001010000000000000515BI0100001178 | 1 | each |
| 67 | 1.66 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | BI01010001010000000000000515BI0100001179 | 5 | each |
| 68 | 1.67 | od115003/2020_2021 : Supply and fixing 25 to 100 A, 36 kA (Ics=100%Icu), 4 pole, Microprocessor release MCCB having adjustable over load, short circuit, earth fault & time setting with extended terminal | BI01010001010000000000000515BI0100001180 | 2 | each |
| 69 | 1.68 | od115005/2020_2021 : Supply and fixing 125 to 160 A, 36 kA (Ics=100%Icu), 4 pole, Microprocessor release MCCB having adjustable over load, short circuit, earth fault & time setting with extended terminal | BI01010001010000000000000515BI0100001181 | 5 | each |
| 70 | 1.69 | od115007/2020_2021 : Supply and fixing 320 to 400 A, 50 kA (Ics=100%Icu), 4 pole, Microprocessor release MCCB having adjustable over load, short circuit, earth fault & time setting with extended terminal | BI01010001010000000000000515BI0100001182 | 1 | each |
| 71 | 1.7 | 90.14.11.13 : MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A | BI01010001010000000000000515BI0100001183 | 8 | no |
| 72 | 1.71 | 90.14.11.16 : MCCB AccessoriesSupply and fixing rotary handle, Direct type (including BUC handle with door interlock ) in the existing MCCB of rating up to 630A. | BI01010001010000000000000515BI0100001184 | 1 | no |
| 73 | 1.72 | od106316/2018_2019 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required. | BI01010001010000000000000515BI0100001185 | 5 | each |
| 74 | 1.73 | od106318/2018_2019 : Supply and providing 6Kg ABC Fire Extinguisher with hose and clamps including fixing it to wall as required. | BI01010001010000000000000515BI0100001186 | 4 | each |
| 75 | 1.74 | od109153/2018_2019 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision. | BI01010001010000000000000515BI0100001187 | 3 | each |
| 76 | 1.75 | od109155/2018_2019 : Supply and providing 2.5mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 11kv dielectric strength including fixing with suitable synthetic adhesive. | BI01010001010000000000000515BI0100001188 | 5 | per metre |
| 77 | 1.76 | od106394/2018_2019 : Charges for the preparation ofelectrical schematic diagram per A3sheet first copy | BI01010001010000000000000515BI0100001189 | 8 | each |
| 78 | 1.77 | od106396/2018_2019 : Charges for the preparation of additional copy Schematic diagram per A3 sheet. | BI01010001010000000000000515BI0100001190 | 48 | each |
| 79 | 1.78 | 14.12.1 : Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels. | BI01010001010000000000000515BI0100001191 | 30 | sqm |
| 80 | 1.79 | 90.2.1.1 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point | BI01010001010000000000000515BI0100001192 | 4 | point |
| 81 | 1.8 | 90.2.1.4 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point | BI01010001010000000000000515BI0100001193 | 1 | point |
| 82 | 1.81 | 90.2.1.6 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points | BI01010001010000000000000515BI0100001194 | 1 | each |
| 83 | 1.82 | 90.3.20.3 : Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture | BI01010001010000000000000515BI0100001195 | 2 | each |
| 84 | 1.83 | 90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. | BI01010001010000000000000515BI0100001196 | 1 | each |
| 85 | 1.84 | 90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C | BI01010001010000000000000515BI0100001197 | 1 | each |
| 86 | 1.85 | 90.4.8 : Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. | BI01010001010000000000000515BI0100001198 | 2 | each |
| 87 | 1.86 | od90379/2020_2021 : Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS.305 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C | BI01010001010000000000000515BI0100001199 | 1 | each |
| 88 | 1.87 | 90.6.10.1 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm | BI01010001010000000000000515BI0100001200 | 15 | metre |
| 89 | 1.88 | 90.6.10.2 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm | BI01010001010000000000000515BI0100001201 | 10 | metre |
| 90 | 1.89 | 90.6.4.1 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 1 Run | BI01010001010000000000000515BI0100001202 | 15 | metre |
| 91 | 1.9 | 1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm | BI01010001010000000000000515BI0100001203 | 20 | metre |
| 92 | 1.91 | 1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm | BI01010001010000000000000515BI0100001204 | 15 | metre |
| 93 | 1.92 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | BI01010001010000000000000515BI0100001205 | 1 | each |
| 94 | 1.93 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | BI01010001010000000000000515BI0100001206 | 1 | each |
| 95 | 1.94 | 1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) | BI01010001010000000000000515BI0100001207 | 1 | each |
| 96 | 1.95 | 2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door | BI01010001010000000000000515BI0100001208 | 1 | each |
| 97 | 1.96 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | BI01010001010000000000000515BI0100001209 | 11 | each |
| 98 | 1.97 | od115001/2020_2021 : Supply fixing and giving connection of 40 A to 63 A 10 KA C curve TP MCB | BI01010001010000000000000515BI0100001210 | 1 | each |
| 99 | 1.98 | od90385/2020_2021 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | BI01010001010000000000000515BI0100001211 | 1 | each |
| 100 | 1.99 | 2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | BI01010001010000000000000515BI0100001212 | 1 | each |
| 101 | 2 | 90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) | BI01010001010000000000000515BI0100001213 | 1 | each |
| 102 | 2.01 | 90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL | BI01010001010000000000000515BI0100001214 | 1 | no |
| 103 | 2.02 | 90.15.4.1 : Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | BI01010001010000000000000515BI0100001215 | 1 | each |
| 104 | 2.03 | 90.3.18.1 : Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps | BI01010001010000000000000515BI0100001216 | 1 | metre |
| 105 | 2.04 | 90.16.1.1 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) | BI01010001010000000000000515BI0100001217 | 10 | metre |
| 106 | 2.05 | 90.16.5.1 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) | BI01010001010000000000000515BI0100001218 | 10 | each |
| 107 | 2.06 | 90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) | BI01010001010000000000000515BI0100001219 | 10 | each |
| 108 | 2.07 | 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) | BI01010001010000000000000515BI0100001220 | 20 | metre |
| 109 | 2.08 | 14.2 : Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. | BI01010001010000000000000515BI0100001221 | 5 | cum |
| 110 | 2.09 | 14.9 : Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required. | BI01010001010000000000000515BI0100001222 | 1 | cum |
| 111 | 2.1 | od114995/2020_2021 : Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel as required. | BI01010001010000000000000515BI0100001223 | 100 | per kg |
| 112 | 2.11 | 14.10 : Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). | BI01010001010000000000000515BI0100001224 | 5 | cum |
| 113 | 2.12 | 14.11 : Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. | BI01010001010000000000000515BI0100001225 | 5 | cum |
| 114 | 2.13 | od114941/2020_2021 : 5.9.5.Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only) | BI01010001010000000000000515BI0100001226 | 5 | sqm |
| 115 | 2.14 | od114943/2020_2021 : 13.62.1.Painting with one or more coat of aluminium paint of approved brand and manufacturer to give an even shade.of aluminium paint of approved brand and manufacturer to give an even shade. | BI01010001010000000000000515BI0100001227 | 15 | sqm |
| 116 | 2.15 | od114945/2020_2021 : 12.4.2.Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63mm | BI01010001010000000000000515BI0100001228 | 7 | metre |
| 117 | 2.16 | od114947/2020_2021 : 12.1.3.Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm | BI01010001010000000000000515BI0100001229 | 25 | sqm |
| 118 | 2.17 | od114949/2020_2021 : 10.16.1. Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | BI01010001010000000000000515BI0100001230 | 175 | kg |
| 119 | 2.18 | od114951/2020_2021 : 50.10.2. Steel work for Purline/Single Section with GI Pipe (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.33 mm dia | BI01010001010000000000000515BI0100001231 | 35 | kg |
| 120 | 2.19 | od114957/2020_2021 : LS provision for KSEB Ltd / Inspectorate / Fire & Rescue Dept fee / Charges { Actual amount will be reimbursed on production of original documents. Tender deviation is not applicable for this item } | BI01010001010000000000000515BI0100001232 | 1 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
