| 1 | 1 | DEVELOPMENT WORKS AT BEKAL BEACH PARK | | | |
|---|
| 2 | 1.01 | 2.32) Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | | 180 | m2 |
|---|
| 3 | 1.02 | 2.8.1) Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | | 73.45 | m3 |
|---|
| 4 | 1.03 | 4.1.8) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | | 10.45 | m3 |
|---|
| 5 | 1.04 | od140713/2020_2021) Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | | 56.41 | m3 |
|---|
| 6 | 1.05 | 50.2.25.1) Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | | 23.17 | m3 |
|---|
| 7 | 1.06 | od142241/2020_2021) Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | | 28.99 | m3 |
|---|
| 8 | 1.07 | 50.6.3.2) Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | | 3.52 | m3 |
|---|
| 9 | 1.08 | 50.9.1.1) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | | 0.37 | m3 |
|---|
| 10 | 1.09 | 9.53) Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | | 72 | no |
|---|
| 11 | 1.1 | 9.48.2) Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc. | | 115.2 | Kg |
|---|
| 12 | 1.11 | 5.3) Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | | 13.38 | m3 |
|---|
| 13 | 1.12 | 5.9.5) Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers | | 21.06 | m2 |
|---|
| 14 | 1.13 | 5.9.3) Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform | | 130.08 | m2 |
|---|
| 15 | 1.14 | 5.22.A.6) Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | | 1545.92 | Kg |
|---|
| 16 | 1.15 | 13.1.1) 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand) | | 405.36 | m2 |
|---|
| 17 | 1.16 | 13.16.1) 6 mm cement plaster of mix: 1:3 ( 1 cement : 3 fine sand) | | 114.38 | m2 |
|---|
| 18 | 1.17 | 13.5.2) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 ( 1 cement : 6 coarse sand) | | 86.24 | m2 |
|---|
| 19 | 1.18 | 11.36) Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | | 146.43 | m2 |
|---|
| 20 | 1.19 | 11.37) Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | | 14.08 | m2 |
|---|
| 21 | 1.2 | 11.41.2) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. | | 39.26 | m2 |
|---|
| 22 | 1.21 | 8.2.2.2) Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm | | 8.09 | m2 |
|---|
| 23 | 1.22 | 8.3.2) Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work | | 36 | m |
|---|
| 24 | 1.23 | 11.20.4) Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment | | 66.64 | m2 |
|---|
| 25 | 1.24 | 12.48) Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (cement motar reeper to be paid separately) | | 86.24 | m2 |
|---|
| 26 | 1.25 | 12.49) Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (cement motar reeper to be paid separately ). | | 19.9 | m |
|---|
| 27 | 1.26 | 13.43.1) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer. | | 519.74 | m2 |
|---|
| 28 | 1.27 | 13.60.1) Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work. | | 205.53 | m2 |
|---|
| 29 | 1.28 | 13.46.1) Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | | 254.03 | m2 |
|---|
| 30 | 1.29 | 50.9.2.1) Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge. using Anjili/ Jack wood | | 9.41 | m2 |
|---|
| 31 | 1.3 | 9.71.2) Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:100x60x2.50 mm | | 9 | no |
|---|
| 32 | 1.31 | 9.71.3) Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:75x50x2.50 mm | | 8 | no |
|---|
| 33 | 1.32 | 9.70.4) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:50x37x1.50 mm | | 8 | no |
|---|
| 34 | 1.33 | 50.9.15.2) Supplying and fixing 300 mm Aluminium aldrop | | 8 | no |
|---|
| 35 | 1.34 | 9.97.5) Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm | | 16 | no |
|---|
| 36 | 1.35 | 9.103) Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete. | | 3 | no |
|---|
| 37 | 1.36 | 9.100.1) Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm | | 16 | no |
|---|
| 38 | 1.37 | 50.9.15.5) Providing and fixing iron hooks and eyes: 100 mm | | 16 | no |
|---|
| 39 | 1.38 | 13.52.1) Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | | 6.4 | m2 |
|---|
| 40 | 1.39 | 13.61.1) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | | 19.16 | m2 |
|---|
| 41 | 1.4 | 9.121) Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | | 26 | m |
|---|
| 42 | 1.41 | 9.122.2) Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge. | | 6.94 | m2 |
|---|
| 43 | 1.42 | 50.18.9.9.1)Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2. | | 16 | m |
|---|
| 44 | 1.43 | 50.18.9.6.2) Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 | | 13 | m |
|---|
| 45 | 1.44 | 50.18.9.5.2) Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2 | | 46 | m |
|---|
| 46 | 1.45 | 50.18.8.9.2) Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2. | | 5 | m |
|---|
| 47 | 1.46 | 50.18.8.6.2) Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | | 16 | m |
|---|
| 48 | 1.47 | 50.18.8.4.2) Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 | | 18 | m |
|---|
| 49 | 1.48 | 50.18.8.3.2) Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | | 5 | m |
|---|
| 50 | 1.49 | Providing and fixing PVC Valve of approved quality: 32 mm nominal size. | | 4 | no |
|---|
| 51 | 1.5 | Providing and fixing PVC Valve of approved quality: 40 mm nominal size. | | 2 | no |
|---|
| 52 | 1.51 | 18.18) Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | | 2000 | Litre |
|---|
| 53 | 1.52 | 18.32.1) Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5 | | 2 | no |
|---|
| 54 | 1.53 | 17.3.1) Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | | 5 | no |
|---|
| 55 | 1.54 | 17.7.2) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap | | 2 | no |
|---|
| 56 | 1.55 | 17.5.1) Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern | | 5 | no |
|---|
| 57 | 1.56 | 50.17.1.4) Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | | 5 | no |
|---|
| 58 | 1.57 | 17.31) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | | 2 | no |
|---|
| 59 | 1.58 | 50.17.1.3) Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | | 5 | no |
|---|
| 60 | 1.59 | od143155/2020_2021) Providing and fixing floor trap of PVC,110mm outer dia (multi trap) including CP coakroach free floor grating with cup etc including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels | | 9 | no |
|---|
| 61 | 1.6 | 18.49.1) Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore | | 5 | no |
|---|
| 62 | 1.61 | od143176/2020_2021) Providing and fixing premium quality CP brass overhead shower 4\" and wall flange of approved make and modern including cost of all materials,labour etc.,complete as directed by the Engineer in charge at all levels. ( The purchase price considered including all accessories is RS 900/- including all accessories any deviation plus or minus in the purchase price will be adjusted in the price quoted ) | | 2 | no |
|---|
