Proposed Construction Of Compound Wall And Beautification Work At Geetai Nagar Lad Gaon Road Open Space
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jan 2021
0 days left
EMD
69251
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vaijapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Construction Of Compound Wall And Beautification Work At Geetai Nagar Lad Gaon Road Open Space
BOQ
| Name of Work: Proposed Construction of Compound Wall and Beautification Work at Geetai Nagar Lad Gaon Road Open Space. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Proposed Construction of Compound Wall and Beautification Work at Geetai Nagar Lad Gaon Road Open Space. | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | PART - A Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.5 m.) By Mechanical Means | BI01010001010000000000000515BI0100001113 | 295.55 | Cubic Metre |
| 3 | 3 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. | BI01010001010000000000000515BI0100001114 | 102.9 | Cubic Metre |
| 4 | 4 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. | BI01010001010000000000000515BI0100001115 | 102.9 | Cubic Metre |
| 5 | 5 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete | BI01010001010000000000000515BI0100001116 | 161.11 | Cubic Metre |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting , roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001117 | 7.06 | Cubic Metre |
| 7 | 7 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC WITH SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed / Crushed Sand ) | BI01010001010000000000000515BI0100001118 | 12.58 | Cubic Metre |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITH SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed / Crushed Sand ) | BI01010001010000000000000515BI0100001119 | 10.419 | Cubic Metre |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITH SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed / Crushed Sand ) | BI01010001010000000000000515BI0100001120 | 10.18 | Cubic Metre |
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying /pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete .(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001121 | 0.19 | Cubic Metre |
| 11 | 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete | BI01010001010000000000000515BI0100001122 | 3.003 | M.T |
| 12 | 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete | BI01010001010000000000000515BI0100001123 | 77.651 | Cubic Metre |
| 13 | 13 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.. | BI01010001010000000000000515BI0100001124 | 687.613 | Square Metre |
| 14 | 14 | Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding\nand curing etc. complete.\n | BI01010001010000000000000515BI0100001125 | 310 | Square Metre |
| 15 | 15 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ Cubic Metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete | BI01010001010000000000000515BI0100001126 | 73.5 | Cubic Metre |
| 16 | 16 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete | BI01010001010000000000000515BI0100001127 | 980 | Square Metre |
| 17 | 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite /quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) | BI01010001010000000000000515BI0100001128 | 2.56 | Cubic Metre |
| 18 | 18 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges,locking arrangements and painting in three coats of oil paint of approved colour and shade etc.complete.(weight 18 Kilogram. to 20 Kilogram. Per Square Metre.) Spec.Number: As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001129 | 13.12 | Square Metre |
| 19 | 19 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. | BI01010001010000000000000515BI0100001130 | 687.613 | Square Metre |
| 20 | 20 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. | BI01010001010000000000000515BI0100001131 | 687.613 | Square Metre |
| 21 | 21 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.Spec.No. As directed by Engineer in Charge | BI01010001010000000000000515BI0100001132 | 1 | Number |
| 22 | 22 | PART - B ITEM NO. : 2 Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. | BI01010001010000000000000515BI0100001133 | 1 | Number |
| 23 | 23 | ITEM NO. : 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes). | BI01010001010000000000000515BI0100001134 | 4 | Number |
| 24 | 24 | ITEM NO. : 4 BASIC TEST OF AGGREGATE. Sieve Analysis.. | BI01010001010000000000000515BI0100001135 | 1 | Number |
| 25 | 25 | ITEM NO. : 5 FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ), Silt & Clay Content | BI01010001010000000000000515BI0100001136 | 1 | Number |
| 26 | 26 | ITEM NO. : 6 FINE AGGREGATES. Chloride & Sulphate Content. | BI01010001010000000000000515BI0100001137 | 1 | Number |
| 27 | 27 | ITEM NO. : 7 FINE AGGREGATES. Silt Factor.... | BI01010001010000000000000515BI0100001138 | 1 | Number |
| 28 | 28 | ITEM NO. : 8 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).. | BI01010001010000000000000515BI0100001139 | 1 | Number |
| 29 | 29 | Royalty Charges for NATURAL SAND. Rate Inclusive of surcharge of 2% (141.34 + 2.82 + 14.13 = 158.29). | BI01010001010000000000000515BI0100001140 | 31.8 | Cubic Metre |
| 30 | 30 | Royalty Charges for HARD MURUM , SOLING STONE , METAL . Rate Inclusive of surcharge of 2% (141.34 + 2.82 = 144.16, Say 144.15) | BI01010001010000000000000515BI0100001141 | 264 | Cubic Metre |
| 31 | 31 | PART - C Electrical Work | BI01010001010000000000000515BI0100001142 | 1 | Work |
| 32 | 32 | PART - D Electrical Work | BI01010001010000000000000515BI0100001143 | 1 | work |
AI Tender Summary
Tender Timeline
Jan 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 02, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender