Construction Of Road From Khejur Kuatol Road From Khejur Kuatol To Saheb Bandh Via Sati Mandir Bandh Within Rangatanr Mouza Of Bhalubasa Gram Panchayat Under Manbazar-I Block In The District Of Purulia Length 0 . 800 Km
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Feb 2021
0 days left
EMD
3.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MANBAZAR-I → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road From Khejur Kuatol Road From Khejur Kuatol To Saheb Bandh Via Sati Mandir Bandh Within Rangatanr Mouza Of Bhalubasa Gram Panchayat Under Manbazar-I Block In The District Of Purulia Length 0 . 800 Km
BOQ
| Name of Work: ROAD FROM KHEJUR KUATOL TO SAHEB BANDH VIA SATI MANDIR BANDH WITHIN RANGATANR MOUZA OF BHALUBASA GRAM PANCHAYAT UNDER MANBAZAR-I BLOCK IN THE DISTRICT OF PURULIA (LENGTH: 0.800 KM) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | ROAD PAVEMENT WORK (CC) [L=0.8 KM]\n\nClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201 for Rural Roads of MORD. By Manual Means- In area of non-thorny jungle | BI01010001010000000000000515BI0100001112 | 0.13 | hact |
| 2 | 2 | Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary. \nfor depth upto 300mm | BI01010001010000000000000515BI0100001113 | ||
| 3 | 2.01 | For depth up to 150 mm. | BI01010001010000000000000515BI0100001114 | 4400 | SQM |
| 4 | 2.02 | For Depth of 150mm to 300 mm | BI01010001010000000000000515BI0100001115 | 4400 | SQM |
| 5 | 3 | Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD. (Borrow pit /pre work post work measurement) | BI01010001010000000000000515BI0100001116 | 420 | CUM |
| 6 | 4 | Supplying, spreading and consolidating Moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification. | BI01010001010000000000000515BI0100001117 | 105 | CUM |
| 7 | 5 | GSB : Granular Sub-base with Graded Material - By Mix in Place Method \nConstruction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).\nGSB: Grading – II (75mm thk.). Using Pakur Variety stone aggregators. \nNote: When the width of laying is not adequate for mechanical operation or in case of small sized jobs, suitable mixing and spreading equipment capable of mixing the material to the desired degree and spreading the mixed materials uniformly according to required line and level to the satisfaction of E-in-C may be approved by the Engineer-in-charge, but the rate of the item is to be reduced by Rs. 30.00/cum | BI01010001010000000000000515BI0100001118 | 330.48 | CUM |
| 8 | 6 | Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works.\nM-25 Grade Using concrete mixer. Stone Aggregate of Pakur Variety | BI01010001010000000000000515BI0100001119 | 612 | CUM |
| 9 | 7 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. | BI01010001010000000000000515BI0100001120 | 3060 | SQM |
| 10 | 8 | SHUTTERING WORK WITH STEEL SHEET PLATE/ 12MM THK. PLY\nHire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.\n(a) Where staging is not required. | BI01010001010000000000000515BI0100001121 | 355.6 | SQM |
| 11 | 9 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight | BI01010001010000000000000515BI0100001122 | 667.5 | Metre |
| 12 | 10 | TRAFFIC SIGN & ROAD SAFETY WORK\nKilometre Stone\nReinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. \nOrdinary kilometer stone (precast) | BI01010001010000000000000515BI0100001123 | 1 | EACH |
| 13 | 11 | Retro-Reflectorised Traffic Signs\nProviding and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). \nThe retro reflective sheeting used on the signs shall consist of white or coloured sheeting having a smooth outer surface which has the property of retro reflection over its entire surface. It shall be weather resistant and exhibit colour fastness | BI01010001010000000000000515BI0100001124 | ||
| 14 | 11.01 | 60 cm equilateral triangle : for Cautionary/Warning Signs | BI01010001010000000000000515BI0100001125 | 10 | EACH |
| 15 | 11.02 | 60 cm Circular : for Mandatory/ Regulatory Signs | BI01010001010000000000000515BI0100001126 | 4 | EACH |
| 16 | 11.03 | 90 cm high Octagon : Mandatory/ Regulatory Signs | BI01010001010000000000000515BI0100001127 | 2 | EACH |
| 17 | 11.04 | 60 cm x 45 cm rectangular : for Informatory/Guide Signs\nFacility Information: symbol within a rectangular board with blue background.\nFor Direction and Place Identification signs: used with destination names and distances with arrows indicating the direction. White Background with Black Arrows/Border/Letters | BI01010001010000000000000515BI0100001128 | 2 | EACH |
| 18 | 12 | R.C. Guard post\nSupplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mending good damages if any during striking off shuttering, making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect.\nWith Pakur variety stone chips | BI01010001010000000000000515BI0100001129 | 80 | EACH |
| 19 | 13 | Citizen's information Board\nProviding and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).\nDirection and Place Identification Signs with size more than 0.9 sqm size : for Citizen's information Board .\n2 nos. (1500x1200) Board at both end of the road | BI01010001010000000000000515BI0100001130 | 3.6 | SQM |
| 20 | 14 | CROSS DRAINAGE WORK: \n2 NOS. 1V-600MM DIA NP3 PIPE CULVERT\n\nEXCAVATION FOR STRUCTURES\nEarthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. | BI01010001010000000000000515BI0100001131 | 38.02 | CUM |
| 21 | 15 | Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. | BI01010001010000000000000515BI0100001132 | ||
| 22 | 15.01 | M-15 Grade Using concrete mixer. PAKUR VARIETY | BI01010001010000000000000515BI0100001133 | 7.42 | CUM |
| 23 | 15.02 | M-20 Grade Using concrete mixer.PAKUR VARIETY | BI01010001010000000000000515BI0100001134 | 20.54 | CUM |
| 24 | 16 | Bedding for Pipe\nType A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) for Rural Roads of MORD Pakur Variety.\n M-15 Grade Using concrete mixer. PAKUR VARIETY | BI01010001010000000000000515BI0100001135 | 2.32 | CUM |
| 25 | 17 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Boulder Laid Dry Without Wire Crates. \nPakur Variety stone boulders of size: 30/45 Kg. | BI01010001010000000000000515BI0100001136 | 11.12 | CUM |
| 26 | 18 | Providing and laying reinforced cement concrete pipe NP3 as per design in single row\nProviding and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD. \n600 mm dia NP3 | BI01010001010000000000000515BI0100001137 | 15 | Metre |
| 27 | 19 | Supplying, spreading and compacting Sand to required thickness, in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction, including lighting, guarding, barricading and making adequate earthen bundh where necessary, curing with water as per direction, mending cracks and depressions by ramming wherever necessary. | BI01010001010000000000000515BI0100001138 | 4.82 | CUM |
| 28 | 20 | Providing and laying Cement concrete Wearing coat M-30 grade with graded stone chips 19mm down including screening and cleaning approved stone chips and sand as necessary laying, finishing complete to camber and grade, curing with water, including cost and carriage of all materials and hire charges for form work including reinforcement complete as per drawing and Technical Specifications vide clause no. 2702 of MoRT&H’s Specification for Road & Bridge Works. | BI01010001010000000000000515BI0100001139 | 0.8 | CUM |
| 29 | 21 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. Where staging is not required. | BI01010001010000000000000515BI0100001140 | 106.46 | SQM |
| 30 | 22 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight | BI01010001010000000000000515BI0100001141 | 9 | metre |
| 31 | 23 | Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. | BI01010001010000000000000515BI0100001142 | 16 | each |
| 32 | 24 | Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint. b) Two Coats | BI01010001010000000000000515BI0100001143 | 16.32 | SQM |
| 33 | 25 | CROSS DRAINAGE WORK: \nDOUBLE CELL RCC BOX-CULVERT [2/33/0]\n\nEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001144 | ||
| 34 | 25.01 | In all sorts of soil excluding marshy soil & rocks (soft or hard) By mechanical means (using excavator of suitable capacity). \nfor depth upto 3m \nWith pumping out water | BI01010001010000000000000515BI0100001145 | 74.15 | Cum |
| 35 | 25.02 | In ordinary rock (not requiring blasting) By mechanical means (using excavator of suitable capacity). (i) With pumping out water. | BI01010001010000000000000515BI0100001146 | 49.44 | CUM |
| 36 | 26 | Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works.\nM-15 Grade Using concrete mixer. Pakur Variety | BI01010001010000000000000515BI0100001147 | 14.76 | CUM |
| 37 | 27 | RCC WORK INCLUDING COST OF FORM WORK | BI01010001010000000000000515BI0100001148 | ||
| 38 | 27.01 | RCC M20 FOR FOUNDATION \nPlain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. RCC Grade M20\nI) Using concrete mixer Pakur Variety | BI01010001010000000000000515BI0100001149 | 40.74 | CUM |
| 39 | 27.02 | RCC M25 FOR SUB-STRUCTURE\nPlain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications.\nRCC Grade M25. Height upto 5m. Using concrete Mixer. (Stone Aggregate of Pakur Variety) | BI01010001010000000000000515BI0100001150 | 46.82 | CUM |
| 40 | 27.03 | RCC M25 FOR SUPER STRUCTURE\nFurnishing and Placing Reinforced / Pre-stressed Cement concrete in Super-structure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technical specifications. \nRCC Grade M25. Using Concrete Mixer. (Stone Aggregate of Pakur Variety) \n(i) For solid slab super-structure. Height upto 5m | BI01010001010000000000000515BI0100001151 | 26.53 | CUM |
| 41 | 28 | Providing and laying Cement concrete Wearing coat M-30 grade with graded stone chips 19mm down including screening and cleaning approved stone chips and sand as necessary laying, finishing complete to camber and grade, curing with water, including cost and carriage of all materials and hire charges for form work including reinforcement complete as per drawing and Technical Specifications vide clause no. 2702 of MoRT&H’s Specification for Road & Bridge Works. | BI01010001010000000000000515BI0100001152 | 2.7 | CUM |
| 42 | 29 | REINFORCEMENT WORK (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001153 | ||
| 43 | 29.01 | REINFORCEMENT WORK FOR BRIDGE FOUNDATION\nSupplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. \nSAIL/ TATA/ RINL | BI01010001010000000000000515BI0100001154 | 3.84 | MT |
| 44 | 29.02 | REINFORCEMENT WORK FOR BRIDGE SUB-STRUCTURE \nSupplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.\nSAIL/ TATA/ RINL | BI01010001010000000000000515BI0100001155 | 5.51 | MT |
| 45 | 29.03 | REINFORCEMENT WORK FOR BRIDGE SUPER STRUCTURE\nSupplying, fitting and placing HYSD bar reinforcement in Bridge Super-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications.\nSAIL/ TATA/ RINL | BI01010001010000000000000515BI0100001156 | 2.5 | MT |
| 46 | 30 | SHUTTERING WORK WITH STEEL SHEET PLATE/ 12MM THK. PLY\nHire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.\n(a) Where staging is not required. | BI01010001010000000000000515BI0100001157 | 18.53 | SQM |
| 47 | 31 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Boulder Laid Dry Without Wire Crates. | BI01010001010000000000000515BI0100001158 | 12.14 | CUM |
| 48 | 32 | FILLER JOINT\nProviding and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. | BI01010001010000000000000515BI0100001159 | 17.4 | metre |
| 49 | 33 | iv) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight | BI01010001010000000000000515BI0100001160 | 9.6 | metre |
| 50 | 34 | WEEP HOLES\nProviding weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. | BI01010001010000000000000515BI0100001161 | 40 | each |
| 51 | 35 | Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint. \nTwo Coats | BI01010001010000000000000515BI0100001162 | 26.2 | SQM |
| 52 | 36 | PROTECTIVE WORK: RCC RETAINING WALL\n\nEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001163 | ||
| 53 | 36.01 | In all sorts of soil excluding marshy soil & rocks (soft or hard) By mechanical means (using excavator of suitable capacity). \nfor depth upto 3m \nWithout pumping out water | BI01010001010000000000000515BI0100001164 | 594 | Cum |
| 54 | 36.02 | III. In ordinary rock (not requiring blasting) By mechanical means (using excavator of\nsuitable capacity). (i) Without pumping out water. | BI01010001010000000000000515BI0100001165 | 396 | CUM |
| 55 | 37 | Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works.\nM-15 Grade Using concrete mixer. Pakur Variety | BI01010001010000000000000515BI0100001166 | 90 | CUM |
| 56 | 38 | RCC WORK INCLUDING COST OF FORM WORK | BI01010001010000000000000515BI0100001167 | ||
| 57 | 38.01 | RCC M20 FOR FOUNDATION \nPlain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. RCC Grade M20\nI) Using concrete mixer Pakur Variety | BI01010001010000000000000515BI0100001168 | 252 | CUM |
| 58 | 38.02 | RCC M25 FOR SUB-STRUCTURE\nPlain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications.\nRCC Grade M25. Height upto 5m. Using concrete Mixer. (Stone Aggregate of Pakur Variety) | BI01010001010000000000000515BI0100001169 | 364.5 | CUM |
| 59 | 39 | REINFORCEMENT WORK (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001170 | ||
| 60 | 39.01 | REINFORCEMENT WORK FOR BRIDGE FOUNDATION\nSupplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.\nSAIL/TATA/RINL | BI01010001010000000000000515BI0100001171 | 25.72 | MT |
| 61 | 39.02 | REINFORCEMENT WORK FOR BRIDGE SUB-STRUCTURE \nSupplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.\nSAIL/ TATA/ RINL | BI01010001010000000000000515BI0100001172 | 42.92 | MT |
| 62 | 40 | SHUTTERING WORK WITH STEEL SHEET PLATE/ 12MM THK. PLY\nHire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.\n(a) Where staging is not required. | BI01010001010000000000000515BI0100001173 | 72.72 | SQM |
| 63 | 41 | FILLER JOINT\nProviding and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. | BI01010001010000000000000515BI0100001174 | 30 | Metre |
| 64 | 42 | iv) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight | BI01010001010000000000000515BI0100001175 | 78.3 | Metre |
| 65 | 43 | WEEP HOLES\nProviding weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. | BI01010001010000000000000515BI0100001176 | 600 | each |
| 66 | 44 | Add: GST @12% on Total Cost of Civil Work | BI01010001010000000000000515BI0100001177 | 1.39784e+07 | Rs. |
| 67 | 45 | Add: Labour Walfare Cess @1% on Total Cost of (Civil Work + GST) | BI01010001010000000000000515BI0100001178 | 1.56558e+07 | Rs. |
AI Tender Summary
Tender Timeline
Jan 14, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender