Annual Repair And Maintenance Of Type-Ii Qtrs Of 109 Bn Bsf Under Shq Bsf Gandhinagar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Jan 2021
0 days left
EMD
19998
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dantiwada → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repair And Maintenance Of Type-Ii Qtrs Of 109 Bn Bsf Under Shq Bsf Gandhinagar
BOQ
| Name of Work:Annual repair and maintenance of Type-II Qtrs of 109 Bn BSF under SHQ BSF Gandhinagar. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001113 | 47.25 | Sqm |
| 2 | 2 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm | BI01010001010000000000000515BI0100001114 | 36 | each |
| 3 | 3 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm | BI01010001010000000000000515BI0100001115 | 40 | each |
| 4 | 4 | Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001116 | 22.5 | Sqm |
| 5 | 5 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm | BI01010001010000000000000515BI0100001117 | 87.8 | Sqm |
| 6 | 6 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001118 | 84 | Sqm |
| 7 | 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001119 | 97.5 | Sqm |
| 8 | 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. | BI01010001010000000000000515BI0100001120 | 1707.4 | Sqm |
| 9 | 9 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. As per manufacturer’s specification. One or more coats on old work. | BI01010001010000000000000515BI0100001121 | 4243.5 | Sqm |
| 10 | 10 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight\nnot less than 10kg/sqm) | BI01010001010000000000000515BI0100001122 | 12.89 | Sqm |
| 11 | 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).\n | BI01010001010000000000000515BI0100001123 | 6030.42 | Sqm |
| 12 | 12 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter | BI01010001010000000000000515BI0100001125 | 10 | each |
| 13 | 13 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore | BI01010001010000000000000515BI0100001126 | 30 | each |
| 14 | 14 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | BI01010001010000000000000515BI0100001127 | 20 | each |
AI Tender Summary
Tender Timeline
Jan 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJan 25, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender