Ghangala Village Estimate For Augmentation Of Water Works And Laying Of Pipe Line Under Jjm Category Ii Construction Of Brick Lining 1 No . Ss Tank , Rcc 1 No . Hlt , 1 No . Filter Bed , 1 No . Cwt , Supply And Erection Of Pumping Machinery And Lay
Tender Value
45.54 Lakhs
Estimated cost
Bid Submission
03 Feb 2021
0 days left
EMD
91200
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Reverse Auction
Location / State
SIWANI → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Ghangala Village Estimate For Augmentation Of Water Works And Laying Of Pipe Line Under Jjm Category Ii Construction Of Brick Lining 1 No . Ss Tank , Rcc 1 No . Hlt , 1 No . Filter Bed , 1 No . Cwt , Supply And Erection Of Pumping Machinery And Laying Of Pipe
BOQ
| Name of Work | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description NS Item | Item Code / Make | Quantity | Units | |
| 1 | 1.1 | Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. \n(A) Clear water pump set (At W/W )\n700 LPM, 45 mtrs head 12 BHP\n\n | 1 | Job | |
| 2 | 1.2 | Supply, erection, testing and commissioning Wall mounted (B) Raw water pump set (At W/W ) \n700 LPM 12 mtrs head 5 BHP\n\n\n | 1 | Each | |
| 3 | 1.3 | Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pumpset 700LPM 45 mtr Head.\na) Main switch 63 Amp. 2 No. (L&T Siemens, ABB)\nb) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T)\nc) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T)\nd) CT 100/3 Nos. (AE/KAPPA/L&T)\ne) VSS & ASS 1 No. each of approved make \nf) SPP 1 No. of approved make \ng) Motor starter, star delta 2 No. for 700 LPM x 45 M Head Motor (L&T Siemens, ABB)\nh) Capacity KVAR as per site requirement\ni) Indicating Lamp - One Set\nj) change over switch 63 amp 1No.\n\n\n | 1 | Each | |
| 4 | 1.4 | Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pump set 700LPM 12 mtr Head.\na) Main switch 63 Amp. 2 No. (L&T Siemens, ABB)\nb) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T)\nc) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T)\nd) CT 100/3 Nos. (AE/KAPPA/L&T)\ne) VSS & ASS 1 No. each of approved make \nf) SPP 1 No. of approved make \ng) Motor starter, star delta 2 No. for 700 LPM x 12 M Head Motor (L&T Siemens, ABB)\nh) Capacity KVAR as per site requirement\ni) Indicating Lamp - One Set\nj) change over switch 63 amp 1No.\n\n\n | 1 | Each | |
| 5 | 1.5 | Supply and fixing following CI D/F pipe and specials/sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank up-to the rising main laid by the deptt. as per plan shown from the fundation well of pump chamber for all rew water and clear water pumping set at w/w in position as per specification given in schedule No.II\nB) CI D/F pipes \n250mm i/d\n | 25 | Mtr. | |
| 6 | 1.6 | B) CI D/F pipes \n150mm i/d\n\n | 35 | Mtr. | |
| 7 | 1.7 | Supply erection testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.\n\n | 145 | Mtr. | |
| 8 | 1.8 | Providing and fixing of complete floating arm and floating drum fabricate of GI sheet of 16 guage with M.S. bolts made of M.S. flat and C.I. flange welded on it with collar one side and other side wire mash welded to prevent foreign elements to enter in floating arm fixed with CI swell bend with C.I. base plate fixed with anchor bolts in water tank haudi 8\" i/d Floating arm complete in all respect as per specification of Engineer-In-Charge | 2 | Job | |
| 9 | 1.9 | Supply erection , testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduct pipe & copper wire etc. as per approved specifications. | 1 | Job | |
| 10 | 2 | Providing & fixing celling fan 1400 mm 56\" with speed adjuster make (make Crompton, usha, Bajaj) complete in respect.\n | 2 | Job |
AI Tender Summary
Tender Timeline
Jan 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender