Operation And Maintenance And Repairs Of Electrical Mechanical Installation At P1p2 And P3 Sewage Pump Houses At New Panvel ( East West ), Cidco Ltd-Maharashtra

TDR : 26593986

Tender Notice
Corrigendum Details
BOQ

Expired

Cidco Ltd , Maharashtra

Tender Brief : Corrigendum : Operation And Maintenance And Repairs Of Electrical Mechanical Installation At P1p2 And P3 Sewage Pump Houses At New Panvel ( East West )

Document Fees
₹ 5900 /-

EMD
₹ 53100.0 /-

Tender Value
Refer document

Submission Date
26-02-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	24-02-2021	Due Date Extended	Admin Corrigendum Date Extend	26-02-2021
2	15-02-2021	CORRIGENDUM NO. 2	Date	22-02-2021
3	08-02-2021	CORRIGENDUM NO. 1	Date	15-02-2021

Name of Work: Operation & Maintenance and Repairs of Electrical / Mechanical installation at P1,P2 and P3 Sewage Pump houses at New Panvel (East /West).
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	PART - A :	item1
2	1.01	Daily operation & maintenance of all electrical installations under scope of work including day to day switching ON/OFF of street lights, Verification & reporting to CIDCO the status, healthyness, checking connections, wiring, earthing complete for proper functioning of all electrical installation & its accessories. \nThe work includes: \na) Reporting the faults, breakdowns, preventive measures, repairs & maintenance and all safety measures, \nb) Recording the reading of MSEDCL energy meter & other measuring devices, obtaining the MSEDCL monthly energy bills, Co-ordination with CIDCO's concerned dept. & MSEDCL for obtaining payment of MSEDCL bills from CIDCO and timely payment to MSEDCL, obtaining receipts. \nc) Monitoring Power Factor & Maintaining it above 0.95, \nd) Co-ordination with various departments/ statutory bodies for monitoring the progress of the work. \ne) Co-ordination and follow-up with MSEDCL for maintaining power supply to electrical installations.\nMinimum Manpower - Supervisor =1, Operator =9 Nos, Helper =1, fitter = 1 nos.\n	item2	365	Per Day
3	2	PART - B :	item3
4	2.01	Pump Set Spares	item4
5	2.02	Supply, erection, testing and commissioning of (40HP) Horizontal pump set spares with their MOC:	item5
6	2.03	i) Impeller-CF8M	item6	1	No
7	2.04	ii) Shaft sleev -SS410.	item7	2	No
8	2.05	iii) Shaft-SS	item8	2	No
9	2.06	iv) Check Nut-SS	item9	2	No
10	2.07	v) Wear ring- SS	item10	2	No
11	2.08	vi) Lantern Ring-SS	item11	2	No
12	2.09	viii) Gland packing	item12	2	No
13	2.1	ix) 'O' Ring-Rubber	item13	2	No
14	2.11	x) bearing-SS	item14	2	No
15	2.12	xi) Liquid Deflector-Rubber	item15	2	No
16	2.13	xii) servicing and complete overhauling	item16	2	Job
17	2.14	Supply ,erection ,testing and commissioning of (80HP) Horizontal pump set spares with their MOC:	item17
18	2.15	i) Impeller-CF8M	item18	1	No
19	2.16	ii) Shaft sleev -SS410.	item19	2	No
20	2.17	iii) Shaft-SS	item20	2	No
21	2.18	iv) Check Nut-SS	item21	2	No
22	2.19	v) Wear ring- SS	item22	2	No
23	2.2	vi) Lantern Ring-SS	item23	2	No
24	2.21	viii) Gland packing	item24	2	No
25	2.22	ix) 'O' Ring-Rubber	item25	2	No
26	2.23	xi) Liquid Deflector-Rubber	item26	2	No
27	2.24	xii) servicing and complete overhauling	item27	2	Job
28	2.25	Supply, erection, testing and commissioning of (80HP) Submersible pump set spares with their MOC:	item28
29	2.26	i) overhauling & servicing.	item29	2	No
30	2.27	ii) bearing -7220B	item30	2	No
31	2.28	ii) bearing -6216	item31	2	No
32	2.29	iii) Mechanical seal (upper)	item32	2	No
33	2.3	iv) Mechanical seal (lower)	item33	2	No
34	2.31	v) Super Oil	item34	15	Ltr
35	2.32	vi) 'O' Ring -Rubber	item35	2	No
36	2.33	vii) Removing & lifting job	item36	2	No
37	2.34	viii) Transporting charges.	item37	2	No
38	2.35	Supply, erection, testing & commissioning of 25HP VT pump spares with their MOC.	item38
39	2.36	i) pump shaft-ss	item39	1	No.
40	2.37	ii)pump shaft sleeve-ss	item40	3	No.
41	2.38	iii) pump impeller-CFM8	item41	2	No.
42	2.39	iv) pump impellar key-SS	item42	3	No.
43	2.4	v) pump bearing -SS	item43	2	No.
44	2.41	vi) check nut-SS	item44	3	No.
45	2.42	vii) water seal-Rubber	item45	3	No.
46	2.43	viii) stud -SS	item46	3	No.
47	2.44	ix) gland packing	item47	3	No.
48	2.45	x) coupling	item48	1	No.
49	2.46	xi) Rubber Spider	item49	2	No.
50	2.47	xii) servicing & overhauling	item50	2	Job
51	2.48	Supply, erection, testing & commissioning of 50HP VT pump spares with their MOC	item51
52	2.49	i) pump shaft -SS	item52	2	No.
53	2.5	ii) shaft sleeve -SS	item53	2	No.
54	2.51	iii) impeller CF8M	item54	1	No.
55	2.52	iv) impeller key-SS	item55	2	No.
56	2.53	v) bearing set.-SS	item56	2	No.
57	2.54	vi) bearing check nut-SS	item57	2	No.
58	2.55	vii) packing set	item58	2	No.
59	2.56	viii) water seal	item59	2	No.
60	2.57	ix) stud -SS	item60	2	No.
61	2.58	x) impeller check nut -SS	item61	2	No.
62	2.59	xi) gland packing -Rubber	item62	2	No.
63	2.6	xii) coupling -SS	item63	1	No.
64	2.61	xiii) Rubber Spider	item64	2	No.
65	2.62	ix) servicing & overhauling	item65	2	Job
66	2.63	Supply, erection, testing & commissioning of 75 HP vertical turbine pump with their MOC.	item66
67	2.64	ii) Impeller lock nut FG200	item67	3	No.
68	2.65	iii) Pump shaft ss	item68	1	No.
69	2.66	iv) Shaft Sleeve -SS	item69	3	No.
70	2.67	v) Impeller Ring -SS	item70	2	No.
71	2.68	vi) Bearing house FG200	item71	1	No.
72	2.69	vii) Bearing bush-SS	item72	1	No.
73	2.7	ix) gland packing-Rubber	item73	3	No.
74	2.71	x) servicing & overhauling	item74	3	No.
75	2.72	Supply, erection, testing & commissioning of 150 HP vertical turbine pump with their MOC.	item75
76	2.73	ii) Impeller lock nut FG200	item76	3	No.
77	2.74	iv) Shaft Sleeve -SS	item77	3	No.
78	2.75	v) Impeller Ring -SS	item78	2	No.
79	2.76	ix) gland packing-Rubber	item79	3	No.
80	2.77	x) servicing & overhauling	item80	3	No.
81	2.78	Supply, Erection, testing & commissioning of motor after carring out Rewinding of all types of Motor (F class insulation only) including to and fro transport from work shop to site	item81	200	Hp
82	2.79	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.	item82	100	Kg
83	3	Substation items	item83
84	3.01	Supplying and erecting approved make 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of \"C\" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.	item84	1	Set
85	3.02	Supplying and erecting approved make, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.	item85	3	Set
86	3.03	Supplying and erecting 11 kV fuse barrel with metal fittings complete.	item86	10	Each
87	3.04	Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWG complete erected for connections on H.T. sides	item87	10	Kg
88	3.05	Supplying and erecting extra thick alkathene pipe 10 mm dia. erected to enclose bare conductor wires complete.. (use shall be restricted to H.T.)	item88	50	Mtr
89	3.06	Supplying operating rod, suitable for 11/22 kV supply with clamps for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthling chain 1.5 m complete.(Light duty)	item89	3	Each
90	3.07	Supplying and erecting clamps, made out of 25x3 mm, copper strips to be fixed to tubular bus for connecting the bare copper wire to other equipment, with brass nuts bolts of suitable dia complete.	item90	10	Each
91	3.08	Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete.	item91	3	Each
92	3.09	Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer	item92	3	Per pair
93	3.1	Transportation of 11/22 kV transformer above 315 kVA to 1000 kVA without loading & unloading (for handing over to section store/ repair works only)	item93	100	Per km
94	3.11	Inspection of faulty distribution transformer 11kV / 22kV on HV side, 415 V on LV side upto 500 kVA capacity in workshop in presence of authority by opening top cover, disconnecting HV & LV studs, tap changer connections; taking out core along with winding for inspection and carrying out necessary tests on HV, LV side, oil, tap-changer etc. checking breather, body condition etc. and submitting inspection report, test reports (oil, insulation, resistance, ratio, etc.) and quotation for repairs complete.	item94	1	Each
95	3.12	Supplying and topping up filtered transformer oil of approved make with test certificate	item95	100	Ltr
96	4	LT panel items	item96
97	4.01	Supplying and erecting contactor similar to L&T make MNX series for motor starter suitable for above 30 H.P. to 40 H.P.	item97	2	Each
98	4.02	Supplying and erecting contactor similar to L&T make MNX series for motor starter suitable for above 45 H.P. to 50 H.P.	item98	2	Each
99	4.03	Supplying and erecting contactor similar to L&T make MNX series for motor starter suitable for 75 H.P. to 90 H.P.	item99	3	Each
100	4.04	Supplying and erecting contactor similar to L&T make MNX series for motor starter suitable for 100 H.P. to 150 H.P.	item100	3	Each
101	4.05	Supplying & erecting HRC fuse cartridge 415V 100A complete	item101	5	Each
102	4.06	Supplying & erecting HRC fuse cartridge 415V 200A complete	item102	10	Each
103	4.07	Supplying & erecting HRC fuse cartridge 415V 300A complete	item103	5	Each
104	4.08	Supplying & erecting HRC fuse cartridge 415V 400A complete.	item104	1	Each
105	4.09	Supplying & erecting fuse bridges with base HC type fuse links 240V 63A erected on polished wooden block complete	item105	1	Each
106	4.1	Supplying & erecting fuse bridges with base HC type fuse links 240V 100A erected on polished wooden block complete	item106	1	Each
107	4.11	Supplying & erecting fuse bridges with base HC type fuse links 40V 200A erected on polished wooden block complete	item107	1	Each
108	4.12	Supplying & erecting fuse bridges with base HC type fuse links 240V 300A erected on polished wooden block complete	item108	1	Each
109	4.13	Supplying, erecting & marking SPMCB 40A to 63A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB	item109	1	Each
110	5	Lighting Part	item110
111	5.01	Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No . FG-ODF/FLS2.	item111	25	Each
112	5.02	Supplying and erecting LED flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2	item112	5	Each
113	5.03	Supplying and erecting regular/ standard model ceiling fan of 900mm. sweep complete erected in position as per specification no. FG-FN/CF	item113	3	Each
114	6	Cables	item114
115	6.01	Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU	item115	50	Mtr
116	6.02	Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU	item116	50	Mtr
117	6.03	Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL	item117	50	Mtr
118	6.04	Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL	item118	50	Mtr
119	6.05	Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm.(10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL	item119	50	Mtr
120	6.06	Supplying, erecting & terminating XLPE armoured cable 1100 V.3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL	item120	10	Mtr
121	6.07	Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXN-CTR	item121	100	Mtr
122	6.08	Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXNCTR	item122	100	Mtr
123	6.09	Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete.	item123	2	Mtr cube
124	6.1	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP	item124	50	Kg
125	7	DG set Spares	item125
126	7.01	Supplying & erecting 12 V 180 Ah heavy duty plate type Battery with terminal wire duly charged complete suitable for DG set with warrantee for 3 years	item126	2	Each
127	7.02	Carrying out servicing of DG set from 250 kVA to 500 kVA with/without AMF panel of any make to ensure smooth running of DG set for 30 mins on load. Checking for abnormal sound and leakages, carry out visual inspection of all moving parts, oil levels, oil filters, fuel filters, air filters and clean them properly, rectify the minor leakages if any. Inspect alternator, stator and rotor for normal speed & proper frequency, examine battery charging with monitoring system and recording voltages, checking battery cells gravity and topping up with distilled water, checking V belts with necessary adjustment, checking and retightening of nut bolts including coupling bolts of engine and alternator, checking & cleaning of radiator and leakage testing checking of radiator & fuel supply hose pipes, checking of AVR, excitation diodes, its connections confirming proper output voltage. checking & resetting of valve tappets, Cleaning of DG set internally using blower, cleaning radiator and Submit the servicing report to engineer in charge. (Non Comprehensive) as per specification no. GEN-SER-AMC	item127	5	Job
128	7.03	Topping up new lubricating oil 15W/40 grade of approved make as per IS 13656 : 2014	item128	75	Ltr
129	7.04	Topping up new glycol based coolant 50/50 with operating range from 118°C to -37°C of approved make	item129	75	Ltr
130	7.05	Supplying and erecting V-Belt of all types and lengths, adjust tension as per requirements from generator manufacturer suitable for DG set from 125 kVA to 250 kVA	item130	3	Each
131	7.06	Supplying and erecting V-Belt of all types and lengths, adjust tension as per requirements from generator manufacturer suitable for DG set from 320 kVA to 500 kVA	item131	3	Each
132	7.07	Supplying and erecting lub oil filter element along with sealing rings, gasket etc complete suitable for DG Set from 82.5 kVA to 250 kVA.	item132	3	Each
133	7.08	Supplying and erecting lub oil filter element along with sealing rings, gasket etc complete suitable for DG Set from 320 kVA to 500 kVA.	item133	3	Each
134	7.09	Supplying and erecting fuel filter along with sealing rings, gasket, primary filter and water separator etc complete suitable for DG Set from 62.5 kVA to 125 kVA	item134	3	Each
135	7.1	Supplying and erecting fuel filter along with sealing rings, gasket, primary filter and water separator etc complete suitable for DG Set from 140 kVA to 200 kVA	item135	3	Each
136	7.11	Supplying and erecting fuel filter along with sealing rings, gasket, primary filter and water separator etc complete suitable for DG Set from 250 kVA to 500 kVA.	item136	3	Each
137	7.12	Supplying and erecting Air cleaner/Air filter element suitable for DG set from 50 kVA to 125 kVA	item137	3	Each
138	7.13	Supplying and erecting Air cleaner/Air filter element suitable for DG set from 140 kVA to 200 kVA	item138	3	Each
139	7.14	Supplying and erecting Air cleaner/Air filter element suitable for DG set from 250 kVA to 500 kVA	item139	3	Each
140	7.15	Supplying and erecting SMPS based Battery Charger input voltage 230 V A.C. & output voltage 24 V DC, charging current 20A suitable to charge DG set Battery	item140	2	Each
141	7.16	Supplying, erecting, testing and commissioning 4 pole power contactor 32A with coil voltage of 220/240 V suitable to operate on AV voltage for DG set.	item141	3	Each
142	8	Piping works	item142
143	8.01	Dismantled Items	item143
144	8.02	Dismantling the existing W.T. fluorescent fitting / S.V./ M.V. / M.H. lamp /LED fitting from wall with brackets and making the site as original complete	item144	45	Each
145	8.03	Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq. mm.	item145	50	Mtr
146	8.04	Dismantling the existing cables of all types & size above 50 sq.mm.	item146	100	Mtr
147	8.05	Dismantling the existing ejecto pump with PVC pipeline	item147	10	Job

Also Visit

Tenders

Maharashtra Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electromechanical Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Operation And Maintenance And Repairs Of Electrical Mechanical Installation At P1p2 And P3 Sewage Pump Houses At New Panvel ( East West ), Cidco Ltd-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Operation And Maintenance And Repairs Of Electrical Mechanical Installation At P1p2 And P3 Sewage Pump Houses At New Panvel ( East West ), Cidco Ltd-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us