}

Laying Of Pipe Lines, Construction Of Valve Chambers, Stand Posts, Construction Of Pumphouse,50000Ltr.Capacity Ogr And Fhtc House Hold Connection In Connection With P.W.S. To Kumulusing Of Kumulusing Gp,(2)Laying Of Pipe Lines, Constn. Of Valve Chambers,, EE RWSS GAJAPATI-Odisha

Rural Water Supply And Sanitation Division has published Laying Of Pipe Lines, Construction Of Valve Chambers, Stand Posts, Construction Of Pumphouse,50000Ltr.Capacity Ogr And Fhtc House Hold Connection In Connection With P.W.S. To Kumulusing Of Kumulusing Gp,(2)Laying Of Pipe Lines, Constn. Of Valve Chambers,. Submission Date for this Tender is 22-01-2021. Pump Supply Tenders in EE RWSS GAJAPATI Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

26593685
Laying Of Pipe Lines, Construction Of Valve Chambers, Stand Posts, Construction Of Pumphouse,50000Ltr.Capacity Ogr And Fhtc House Hold Connection In Connection With P.W.S. To Kumulusing Of Kumulusing Gp,(2)Laying Of Pipe Lines, Constn. Of Valve Chambers,
National Competitive Bid
Indian
Odisha
EE RWSS GAJAPATI
22-01-2021

Tender Details

Laying Of Pipe Lines, Construction Of Valve Chambers, Stand Posts, Construction Of Pumphouse, 50000Ltr.Capacity Ogr And Fhtc House Hold Connection In Connection With P.W.S. To Kumulusing Of Kumulusing Gp, ( 2 ) Laying Of Pipe Lines, Constn. Of Valve Chambers, Stand Posts, Construction Of 10, 000 Ltr Capacity Rectangular Rcc Tank With 10.00 Mtr Height Rcc Platform + Pump House Under The Storage And Fhtc House Hold Connection In Connection With P.W.S. To Khiligonda Of Khiligonda Gp Under Rayagada Block ( .Ch: Jjm ( 40 Lpcd Retrofitting Water Supply Scheme

Key Value

Document Fees
INR 10000 /-
EMD
INR 45600.0 /-
Tender Value
INR 45.60 Lakhs /-

BOQ Items

NAME OF THE WORK : -- "(1) LAYING OF PIPE LINES, CONSTN. OF VALVE CHAMBERS, STAND POSTS, CONSTRUCTION OF PUMPHOUSE,50000LTR.CAPACITY OGR AND FHTC HOUSE HOLD CONNECTION IN CONNECTION WITH P.W.S. TO KUMULUSING OF KUMULUSING GP,(2)LAYING OF PIPE LINES, CONSTN. OF VALVE CHAMBERS, STAND POSTS, Construction of 10,000 ltr capacity RECTANGULAR RCC TANK with 10.00 mtr Height RCC Platform + PUMP HOUSE under the storage AND FHTC HOUSE HOLD CONNECTION IN CONNECTION WITH P.W.S. TO KHILIGONDA OF KHILIGONDA GP UNDER RAYAGADA BLOCK(.CH: JJM (40 LPCD RETROFITTING WATER SUPPLY SCHEME)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 P.W.S. TO KUMULUSING OF KUMULUSING GP -PIPE LAYING Supplying all labour, T&P for earth work excavation in all kinds of soil (for pipe line trench) within 50 mtrs initial lead and 1.5 mtrs initial lift including rough dressing and leveling the bed etc., all complete as per the direction of Engineer-in-charge.PIPELAYING 589.9 cum.
2 2 Supplying all materials, labour , T&P for laying of following HDPE pipes of PE-80& PN-8 pressure rating conforming to IS4984-1995 &specials of following outside diametre and class-4 to class-5 and jointing by fusion welding method including testing as per specification complete as per direction of Engineer-in-charge 90 mm dia HDPE. pipe 1060 mtr.
3 3 110 mm dia HDPE. Pipe 260 mtr.
4 4 160 mm dia HDPE. Pipe 250 mtr.
5 5 Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge. 575.67 cum.
6 6 Supplying all labor T&P for Dismentling and removing Cement Concrete works etc.& depositing the usable materials with in initial lead & lift 15 cum.
7 7 Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. during laying of pipeline etc as per the direction of the Engineer in Charge. C.C(1:4:8) 7.5 cum.
8 8 Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. during laying of pipeline etc as per the direction of the Engineer in Charge. C.C(1:2:4) 7.5 cum.
9 9 Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.80 mm dia S.V,. 5 each
10 10 80 mm dia NRV 1 each
11 11 100 mm dia SV 1 each
12 12 150 mm dia SV 1 each
13 13 Supplying all materials, labour and T&P for fixing of 15mm to 25 mm dia SINGLE AIR VALVE including fitting of required PVC service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete. 1 each
14 14 Supplying all materials, labour, T&P for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8), CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with CC 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge. 8 each
15 15 Supplying all materials, labour, T&P for construction of brick masonry Air Valve chambers of internal size 75x75x100cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) fly ash Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge. 1 each
16 16 Supplying all materials, labour, T&P for construction of platform around production well of size 120x120x120 cm with all lead royalty etc. such as earth work excavation, RR stone masonary CM(1:6), 20mm cement plaster with C.M. (1:6), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and as per direction of Engineer-in-charge. 1 each
17 17 Constn. of 1000 ltrs capacity RCC Cistern for Govt. institutions as per specification and approved drawing including earth work excavation, bed concrete with C.C. (1:4:8), R.R. stone masonary in (1:6) C.M., C.C. (1:1½:3), 20 mm cement plaster in C.M. (1:6) over RR stone masonary work, 12 mm cement plaster in C.M. (1:4) over C.C. works and cement punning with supply & fitting fixing of all necessary pipe fittings from supply main pipe line to stand post etc. as per site requirement all complete and as per the direction of Engineer-in-charge. 1 each
18 18 Providing FHTC by supplying & fitting fixing of all necessary pipes and fittings from supply main pipe line to delivery point post such as PVC Saddle, G.M. ferrule Cock , 15mm & 20mm G.I fittings, 15 mm CI Handle cock, 100 mm dia Preacst stanpost ( GI wire reinforced) of height 1.2m with base (300mmX300mmX150mm) holding 20 mm GI pipe and supplying of material & labor for laying of Service connection of 20 mm HDPE pipe of PE 80 PN 10.0 (@2mtr for each house) etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O)) 259 each
19 19 CC Road Crossing (For the required houses opposite to the main pipe line)\nSupplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O)) 113 each
20 20 Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC. 80 mm dia G.I. ( medium ) pipe 48 mtr
21 21 Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete.80 mm dia G.I. ( medium ) flange 14 nos
22 22 Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25) 7 Each
23 23 80mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr) 4 Each
24 24 80mm X 80mm x 80mm All Flanged (A/F) G.I. "Y" Tee (0.60 X 0.60 x 0.60 mtr) 1 Each
25 25 Supplying all labour T&P for cutting GI pipes of following size at work site for making specials, welding of flanges, welding of pipes etc all complete as per the direction of Engineer-in-charge. 1.76 Mtr
26 26 Supplying all labour, T&P for fillet welding to the GI Pipes of following size at work site by using welding generator including cost of welding materials and testing of Joints etc. all complete as per the direction Engineer-in-charge. 1.76 Mtr
27 27 Supplying all materials, labour, T&P for Construction DISPLAY BOARD of size1.5M. X 1.5M.for writing necessary salient features of the work. 1 Each
28 28 CONSTN. OF PUMP HOUSE (6.25M x 3.75M ) Supplying all labour and T&P for earth work in all kinds of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of Engineer –in-charge. 29.06 cum
29 29 Supplying all materials, labour and T&P for filling foundation trenches with sand watering and ramming etc., all complete as per direction of Engineer-in-charge 11.21 Cum
30 30 Supplying all materials, labour, T&P for providing cement concrete (1:4:8) in foundation & plinth with 4cm size crusher broken HBG metal with cost, conveyance, royalty of materials including watering, curing ramming etc., complete. 4.57 Cum
31 31 Supplying all materials, labour, T&P for providing RR HG stone masonary in cement mortar (1:6) in foundation and plinth with cost, conveyance and royalty of materials including watering curing etc., complete 14.39 Cum
32 32 Supplying all materials, labour, T&P for providing 1st class K.B. brick work in C.M.(1:6) with KB bricks of size 23x11x8 cm and having crushing strength not less than 75 kg/cm2 with cost, conveyance and royalty of materials and watering and curing etc., complete. 15.13 Cum
33 33 Filling foundation and plinth with excavated earth with well watered and rammed including all labour and T&P etc., as per specification all complete and as per direction of Engineer-in-charge. 11.191 cum
34 34 Supplying all labour and T&P for providing rigid and smooth centering and shuttering for RCC works and dismantling them after casting including cost of all materials T&P etc., complete as per direction of Engineer-in-charge.Plinth bend 12.38 Sqm
35 35 Lintel 9.13 Sqm
36 36 Roof slab, chajja 29.51 Sqm
37 37 Supplying all materials, labour, T&P for providing RCC (1:1.5:3)works using 12 mm HBG crusher broken chips and washed and screened sand with cost, conveyance, royalty of materials and including watering curing etc., complete and as per direction of Engineer-in-charge. 5.52 Cum
38 38 Supplying all materials, labour and T&P for providing 2.5 cm thick gradingconcrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials etc., all complete as per direction of Engineer in-charge. 26.53 Sqm
39 39 Supplying all materials, labour and T&P for cutting, bending, binding and straightening the rods (reinforcement) for RCC work and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost, conveyance and taxes of HYSD steel (rod) of SAIL / TISCO brand of Fe-415 specifications etc. all complete as per direction of Engineer-in-charge. 4.42 Qntl.
40 40 Supplying all materials, labour, T&P for providing 12mm thick cement plaster in CM (1:6) over the brick work including watering and curing etc., complete as per direction of Engineer-in-charge. 185.22 Sqm
41 41 Supplying all materials, labour, T&P and providing 2.5cm thick base flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete. 18.7 Sqm
42 42 Providing & Fixing Ceramic tiles of size (300mm X 300mm ) in floors on 25mm thick bed & cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. 18.7 Sqm
43 43 Providing & Fixing ceramic glazed tiles in walls, dadoes skirting and risers of steps on 12mm thick bed of cement mortar( 1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. 21 Sqm
44 44 Fitting and fixing of RCC Zally 0.36 sqm
45 45 Wall painting two coats withplastic emulsion paints of approved shade of new work over a coat of white wash to give an even shade excuding cost of paint.(for 10 sqm) including all cost, conveyance,taxes,royality etc.complete. Over a coat of white washing 89.05 sqm
46 46 Supplying all materials, labour, T&P for providing distempering two coats with distemper of approves shade over a coat of white wash to give an even shade including cost of all materials, taxes, royalties etc., all complete as per direction of E.I.C. 100.97 sqm
47 47 Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )\n 129.6 kg
48 48 Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )\n 228 kg
49 49 Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete 15.87 sqm
50 50 Supplying all materials labour T&P and fixing and fitting of 40mm thick PVC with hinge,aldrop and locking arrengement etc all complete as per the direction of EIC. 1 sqm
51 51 Supplying all materials labour T&P and fixing and fitting water closet Odisha pan of size 580mmx440mm duly embedded cement concrete (1:3:6) using 12mm size h.b.g. chips including cost carriage & royality of Odisha pan & P trap all complete as per specification & direction of E.I.C etc all complete 1 each
52 52 Supplying all materials labour T&P and fixing and fitting of 4'0" dia x 4' 0" hight RCC ring O.H storage tank with RCC bottom plate including carrige and macking RCC (1:2:4) for cross beam for supporting the tank in position including cost carriage & royality as per specification & direction of E.I.C etc all complete . 1 each
53 53 Supplying all materials labour T&P and fixing and fitting of PVC waste ventilating pipe and fixing to wall with nails,bobbins and wooden plugs and laying trenches including earth work in excavation in all kind of soil and refilling etc all complete. 10 mtr
54 54 Supplying all materials labour T&P and cutting hole through existing brick masonary wall for taking PVC pipe and fitting including macking good to the dammages etc all complete. 1 each
55 55 Supplying all materials labour T&P and fixing and fitting wall or celling with PVC pipe with ASTM D-1785(sch-80) of the following nominal bore,tube,claps etc all complete..25mm dia PVC pipe 20 mtr
56 56 20mm dia PVC pipe 15 mtr
57 57 Supplying all materials labour T&P and fixing and fitting of brass or Gun metal full way valve confirming to BIS:778 of following nominal size etc all complete..25mm dia Brass Fulway valve 1 each
58 58 20mm dia Brass Fulway valve 2 each
59 59 15mm CP Bib cock 2 each
60 60 Supplying all materials labour T&P and cutting grooves in wall for taking pipe of 15mm to 25mm dia GI/PVC pipe and macking good to the damages etc all complete. 15 mtr
61 61 Supplying all materials, labour T&P for construction of 1.20mtr diax2.55mtr Deep soak-way pit with dry brick wailing up-to 2.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top cement plaster (1:3) inside and outside, inside filled with dry brick khoa of 50mm to 100mm size to a height of 2.00mtr. from bottom, covered by means of 40mm thick R.C.C. perfeorated slab, 50mm thick R.C.C. well cove in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design & drawing and direction of EIC . ( Per each )Soak-way pit size ( 1.20mtr x 2.55mtr.) 1 each
62 62 Supplying all materials, labour T&P for construction of 1.20mtr diax2.55mtr Deep leach pit with dry brick wailing up-to 2.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top cement plaster (1:3) inside and outside, covered by means of 40mm thick R.C.C. perfeorated slab, 50mm thick R.C.C. well cove in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design & drawing and direction of EIC . ( Per each )Leach pit size ( 1.20mtr x 2.55mtr.) 1 each
63 63 Supplying all materials labour T&P and fixing and fitting of PVC cowl etc all complete 1 no
64 64 Supplying all materials labour T&P and fixing and fitting of 125mm dia CP Grating with required cement etc all complete 1 no
65 65 Supplying all materials labour T&P and fixing and fitting of Wash Hand Basin with hole for pillar cock with cast iron/MS brackets painted white includings in wall macking good to the dammages etc all complete. 1 no
66 66 Supplying all materials labour T&P and fixing and fitting of (600mmx450mm) bevelled edge mirror of supierrior glass mounted on 6mm thick AC sheet and fix to wooden plug with chromium plated brass screws and wash etc all complete. 1 no
67 67 Supplying all materials labour T&P for writing on pump house with approver enamel paint and writing in word etc all complete. 25 sqft
68 68 Construction of 50000 LTR OGRSupplying of all labour,T&P,material including taxes for soil testing ,supply of approved design, drawing , construction,errection,testing & commissioning etc. of RCC OVERGROUND storage reservoir of 50000 ltrs capacity consisting of cylindrical container with circular dome with raft foundation as applicable using CC M-25 with sand and pcc layer below foundation, as per approved drawing, excluding in-let,out-let,over flow & washing line of OGR, Stainless steel ladder inside and outside the ESR,CI puddle collar of suitable size,0.6 m dia CI manhole cover at dome , RCC vent with jally, lightening arrestor and water level indicator etc. and wall writing complete as per direction of the Engineer - in- Charge. 1 Nos.
69 69 PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 5 HP Horizontal submersible pumpset of approved make (KSB, Kirloskar,CRI ) discharge 167 LPM, Head- 88mtrs ( one set standby) 2 Set
70 70 Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 5 HP three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp. 2 Nos
71 71 4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (reputed make etc.) 50 Mtr
72 72 Supply of 2.5sqmm 31/2 core aluminium armoured cable 10 Mtr
73 73 Lowering of 50mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) PE 80 PN 08 inside the production well. 50 Mtr
74 74 Supplying all materials, labour, T&P for laying, fitting and fixing of 32 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 8.0 to be laid as a casing for 4mm2/6mm2 3core flat submersible cable in connection with pumping installation work, including earth work excavation of size 30cm width X 60Cm depth for HDPE Pipe line trench, duly inserting the above supplied flat submersible cable, refilling of the trenches, with electrical connections etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. 50 Mtr
75 75 Supplying, Fitting of 200mm dia C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples, s/s nut bolt, wire rope clamp suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main 1 Set
76 76 Supply, installation, testing and commissioning of main switches of following capacity on existing surface/wall mounting and completed with HRC fuse links, interconnections, earthing etc, as required as per direction of EIC. ( Make- Seimens/ HPL / Anchor/ L&T/ Havells/C&S)63 Amp ICTPN main switch on MS angle frame 2 each
77 77 Supply & fitting of copper bus bar with suitable shut metal enclouser including all connection. 63AMPs TPN bus bar 1 each
78 78 Supplying & fitting of porceilin base 100 amp kit kat ( Anchor/ Havells) 3 each
79 79 Supplying and fitting of CFL street light fitting with bulb 2 each
80 80 Supplying and fixing of standard earthing with G.I earth pipe 3 mtr, long 40mm dia ISImarked including accessories and providing masonary enclosure with cover plate with charcoal and salt as required 2 each
81 81 Recessed/ surface submain wiring alongwith earth wire with the following sizes of PVC insulated three core multistand coper conductor ISI marked confirming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6mm in surface / recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/ Havells/v- Guard/KEI)( connection to mainswitch, kitkat and panel board) 20 each
82 82 Surface Electrical wiring to light point with 1.5 sqmm FR PVC insulated single core multistand copper conductor of ISI marked with 20mm dia non- metalic PVC flexible conduit with 5A,250V piano type switch ISI marked and ceiling rose , holder ISI marked mounted on MS box having front bakelite cover of suitable size, M.S. box with 1.5sqmm FR PVC insulated single core multistand copper conductor as earth wire including all accessories and connection as per direction of EIC. 4 each
83 83 Supplying & fitting of 32 Amp TP MCB 1 each
84 84 Supplying and fixing of 25mm x 5mm thick M/S angel frame of size 75 cm x 120 cm covered with the commercial ply board including embeded on wall with the all consumable materials like cement, chips, sand etc 1 each
85 85 Supplying & fixing of 20 watt CFL Bulb 2 each
86 86 Supplying & fixing of 5 AMP plug with switch 1 each
87 87 Supply of shock proof rubber mat and one electrical tester & rubber golves. 1 each
88 88 P.W.S. TO KHILIGONDA OF KHILIGONDA GP UNDER RAYAGADA BLOCK PIPE LAYING Supplying all labour, T&P for earth work excavation in all kinds of soil (for pipe line trench) within 50 mtrs initial lead and 1.5 mtrs initial lift including rough dressing and leveling the bed etc., all complete as per the direction of Engineer-in-charge.PIPELAYING 209.741 cum.
89 89 Supplying all materials, labour , T&P for laying of following HDPE pipes of PE-80& PN-8 pressure rating conforming to IS4984-1995 &specials of following outside diametre and class-4 to class-5 and jointing by fusion welding method including testing as per specification complete as per direction of Engineer-in-charge 63 mm dia HDPE. pipe 600 mtr.
90 90 Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge. 207.872 cum.
91 91 Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.50mm dia full way valve 3 each
92 92 50mm dia check valve 1 each
93 93 Supplying all materials, labour and T&P for fixing of 15mm to 25 mm dia SINGLE AIR VALVE including fitting of required PVC service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete. 2 each
94 94 Supplying all materials, labour, T&P for construction of brick masonry Air Valve chambers of internal size 75x75x100cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) fly ash Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge. 2 each
95 95 Supplying all materials, labour, T&P for construction of brick masonry full way Valve chambers of internal size 60x60x75cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) fly ash Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge. 2 each
96 96 Providing FHTC by supplying & fitting fixing of all necessary pipes and fittings from supply main pipe line to delivery point post such as PVC Saddle, G.M. ferrule Cock , 15mm & 20mm G.I fittings, 15 mm CI Handle cock, 100 mm dia Preacst stanpost ( GI wire reinforced) of height 1.2m with base (300mmX300mmX150mm) holding 20 mm GI pipe and supplying of material & labor for laying of Service connection of 20 mm HDPE pipe of PE 80 PN 10.0 (@4 mtr for each house) etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O)) 24 each
97 97 CC Road Crossing (For the required houses opposite to the main pipe line)\nSupplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O)) 24 each
98 98 Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC. 50 mm dia G.I. ( medium ) pipe 100 mtr
99 99 Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete.50 mm dia G.I. ( medium ) flange 35 nos
100 100 Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25) 20 Each
101 101 GI Fittings-50mm dia x 900GI Bend D/F of size (0.30 x 0.30)m 4 Each
102 102 50mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr) 2 Each
103 103 50mm X 50mm x 50mm All Flanged (A/F) G.I. "Y" Tee (0.60 X 0.60 x 0.60 mtr) 1 Each
104 104 Supplying all labour T&P for cutting GI pipes of following size at work site for making specials, welding of flanges, welding of pipes etc all complete as per the direction of Engineer-in-charge. 3.143 Mtr
105 105 Supplying all labour, T&P for fillet welding to the GI Pipes of following size at work site by using welding generator including cost of welding materials and testing of Joints etc. all complete as per the direction Engineer-in-charge. 3.143 Mtr
106 106 Supplying all materials, labour, T&P for Construction DISPLAY BOARD of size1.5M. X 1.5M.for writing necessary salient features of the work. 1 Each
107 107 Documentaion charges for the scheme 1 Each
108 108 Construction of 10,000 ltr capacity RECTANGULAR RCC TANK with 10.00 mtr Height RCC Platform + PUMP HOUSE under the storage Earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. 18.878 cum.
109 109 Supplying all materials, labour, Filling sand including watering including cost and conveyance of moorum & Sand etc all complete as per direction of Engineer-in-Charge 3.466 cum.
110 110 Supplying all materials, labour, T&P and providing C.C.(1:3:6) with 4cm size HG metal including cost carriage royalty of all materials etc all complete. 3.438 cum.
111 111 R.C.C. work of M-25 grade with 20mm and down grade crosser broken hard granite stone chips including hoisting and laying including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete as per direction of engineer-in-charge. Work within 1.50 m depth 3.011 cum.
112 112 Ground Floor (upto 3.0m ht from GL) 3.43725 cum.
113 113 1st Floor (above 3.0m upto 6.0 m ht) 3.5865 cum.
114 114 2nd Floor (above 6.0m upto 9.0 m ht) 2.60645 cum.
115 115 3rd Floor (above 9.0m upto 12.0 m ht) 29.05 cum.
116 116 RANDOM RUBBLE Stone masonary in CM (1:6) in foundation and plinth 3.91 cum.
117 117 Fly ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials 11.58 cum.
118 118 Supplying all materials, labour, T&P and providing Labour for MS reinforcement for RCC work including cutting bending, binding and tying the grills & placing in position including cost of binding wire 18 to 20 gauge. and carriage of the MS Rod 70.74 Qntl
119 119 Supplying all materials, labour, T&P and providing rigid &smooth centering & shuttering for RCC work including false work & dismantling them after casting including carriage of materials etc all complete Column & Beam 13.54 Sqm
120 120 Ground Floor (upto 3.0m ht) 81.4892 sqm
121 121 1st Floor (above 3.0m upto 6.0 m ht) 66.702 sqm
122 122 2nd Floor (above 6.0m upto 9.0 m ht) 69.9 Sqm
123 123 3rd Floor (above 9.0m upto 12.0 m ht) 115.493 sqm
124 124 Providing 20mm thick cement plaster in cement mortar of specification (1:4) including closed deep chipping and slurry treatment. including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete.Ground Floor (upto 3.0m ht) 345.29 sqm
125 125 12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials 58.524 sqm
126 126 Earth filling with excavated materials including watering and ramming etc all complete 3.24 cum
127 127 Supplying all materials, labour, T&P and providing 2.5cm thick base flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.\n 12.96 sqm
128 128 Providing & Fixing Ceramic tiles of size (300mm X 300mm ) in floors on 25mm thick bed & cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. 12.96 sqm
129 129 Providing & Fixing ceramic glazed tiles in walls, dadoes skirting and risers of steps on 12mm thick bed of cement mortar( 1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. 2.16 sqm
130 130 Supplying all materials labour T&P and providing cement washing two coat to new plastered surface including transportation charges taxes etc all complete 58.524 Sqm
131 131 Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )Door & window with grill 100 Kg
132 132 Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete 10.67 sqm
133 133 Finishing wall with water proofing cement paint two coats of approved shade over one coat of cement wash on new plastered surface to give an even shade including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete Ground floor ( up to 3.0m ht from GL) 344.573 sqm
134 134 Supplying & Fixing of following items as per approved Specification including cost of all materials, labour, fabrication, Transportation etc. complete.Supplying & Fixing of CI Manhole Cover 2 each
135 135 S.S. Ladder 1 each
136 136 S.S Hand rail 50 KG
137 137 Supplying all materials labour T&P for writing on ESR with approved enamel paint in word etc all complete. 25 sqft
138 138 Internal Electrification Supply, installation, testing and commissioning of main switches of following capacity on existing surface/wall mounting and completed with HRC fuse links, interconnections, earthing etc, as required as per direction of EIC. ( Make- Seimens/ HPL / Anchor/ L&T/ Havells/C&S) 63 Amp ICTPN main switch on MS angle frame 2 Each
139 139 Supply & fitting of copper bus bar with suitable shut metal enclouser including all connection.63AMPs TPN bus bar 1 Each
140 140 Supplying & fitting of porceilin base 100 amp kit kat ( Anchor/ Havells) 3 Each
141 141 Supplying and fitting of CFL street light fitting with bulb 2 Per set
142 142 Supplying and fixing of standard earthing with G.I earth pipe 3 mtr, long 40mm dia ISImarked including accessories and providing masonary enclosure with cover plate with charcoal and salt as required 2 Each
143 143 Recessed/ surface submain wiring alongwith earth wire with the following sizes of PVC insulated three core multistand coper conductor ISI marked confirming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6mm in surface / recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/ Havells/v- Guard/KEI)( connection to mainswitch, kitkat and panel board) 20 Mtr
144 144 Surface Electrical wiring to light point with 1.5 sqmm FR PVC insulated single core multistand copper conductor of ISI marked with 20mm dia non- metalic PVC flexible conduit with 5A,250V piano type switch ISI marked and ceiling rose , holder ISI marked mounted on MS box having front bakelite cover of suitable size, M.S. box with 1.5sqmm FR PVC insulated single core multistand copper conductor as earth wire including all accessories and connection as per direction of EIC. 4 Each
145 145 Supplying & fitting of 32 Amp TP MCB 1 Each
146 146 Supplying and fixing of 25mm x 5mm thick M/S angel frame of size 75 cm x 120 cm covered with the commercial ply board including embeded on wall with the all consumable materials like cement, chips, sand etc 1 per set
147 147 Supplying & fixing of 20 watt CFL Bulb 2 Each
148 148 Supplying & fixing of 5 AMP plug with switch 1 Each
149 149 Supply of shock proof rubber mat and one electrical tester & rubber golves. 1 per set
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail